sundin mo lng ang tut working yan ka2try ko lng ngaunsame here...not working
Dun po sa instruction number 8..
for DV 235T 1. Fist dôwnlôad FIRMWARE You do not have permission to view the full content of this post. Log in or register now. 2. rename the dôwnlôaded file (remove the.zip file extension) 3. dont unzip or extract the file 4. OPEN BROWSER GO TO 192.168.15.1 LOGIN DETAILS username:smart password:smart 5. GO TO MANAGEMENT>UPGRADE CLICK BROWSE>BROWSE dôwnlôaded file 6. Click Apply 7. AFTER REBOOT LOGIN to Gui USING Username: smart Password: smart 8. then go to management>recovery click factory default 9. AFTER REBOOT LOGIN 10.1.1.254 TO ACCESS GUI using Username: admin Password: admin 10. Change Mac Address Open DOS Command (CMD) telnet 10.1.1.254 login: admin password: admin type:enable type:router type:wan mac type: commit type: exit type: reboot 11. After Reboot GO TO GUI 10.1.1.254 then Login (Username: admin Password: admin) 12. go to wimax>scanner then click edit then insert to add frequency then click apply list of frequency for SMART(Domain SMARTBRO.NET ) 2337500 2347500 2357500 2345000 2355000 2365000 list of frequency for GLOBE 2505000 2507500 2510000 2602000 2612000 2622000 2638000 13. After Adding frequency Click Apply 14. FOR GLOBE USERNAME = GENERATEDPASSWORD@GLOBELINES.COM.PH (OR if VIP MAC use the other domain) PASSWORD= GENERATEDPASSWORD(by wimaxtools, yyyxyyyz or other tools) IDENTITY = MAC@GLOBELINES.COM.PH ( if VIP MAC use the other domain) remove COLON of MAC 15. On Option ONLY (Auto Prepend Auth Mode and Ignore Cert Verification) are the check 16. In username textbox only 32 char is the maximum allowed so here the tweak to add the domain RIGHT CLICK TEXTBOX of USERNAME THE INSPECT ELEMENT then look MAXLENGHT=32 AND CHANGE IT TO 50 OR 100 THEN ADD .ph in USERNAME TO SEE IF OK. then CLICK APPLYThats it.. Reboot Then You are Connected
17. For Smart. Change the Domain used and Frequency Used.
CREDITS to DISCOVERER of this tricks.
sundin mo lng ang tut working yan ka2try ko lng ngaun