1. Welcome to Pinoy Internet and Technology Forums. Take a moment to Sign up and gain unlimited access to the forums and extra privileges that guests are not entitled to. Having an account grants you additional privileges, such as:

    If you have any problems with the registration process or your account login, please Contact us. If you need to reset your password, click here.

TUT How to reconnect disconnected myBro

Discussion in 'WiMAX, Canopy, other Modems' started by racky, Jan 1, 2014.

    • Please or Register to view links
    • Please or Register to view links
    • for DV 235T​
    • 1. Fist DOWNLOAD FIRMWARE​
    • Please or Register to view links
    • 2. rename the downloaded file (remove the.zip file extension)​
    • 3. dont unzip or extract the file​
    • 4. OPEN BROWSER GO TO 192.168.15.1​
    • LOGIN DETAILS​
    • username:smart​
    • password:smart​
    • 5. GO TO MANAGEMENT>UPGRADE CLICK BROWSE>BROWSE downloaded file​
    • 6. Click Apply​
    • 7. AFTER REBOOT LOGIN to Gui USING​
    • Username: smart​
    • Password: smart​
    • 8. then go to management>recovery​
    • click factory default​
    • 9. AFTER REBOOT LOGIN 10.1.1.254 TO ACCESS GUI using​
    • Username: admin​
    • Password: admin​
    • 10. Change Mac Address​
    • Open DOS Command (CMD)​
    • telnet 10.1.1.254​
    • login: admin​
    • password: admin​
    • type:enable​
    • type:router​
    • type:wan mac​
    • type: commit​
    • type: exit​
    • type: reboot​
    • 11. After Reboot GO TO GUI 10.1.1.254 then Login (Username: admin Password: admin)​
    • 12. go to wimax>scanner then click edit then insert to add frequency then click apply​
    • list of frequency for SMART(Domain SMARTBRO.NET )​
    • 2337500​
    • 2347500​
    • 2357500​
    • 2345000​
    • 2355000​
    • 2365000​
    • list of frequency for GLOBE​
    • 2505000​
    • 2507500​
    • 2510000​
    • 2602000​
    • 2612000​
    • 2622000​
    • 2638000​
    • 13. After Adding frequency Click Apply​
    • 14. FOR GLOBE​
    • USERNAME = GENERATEDPASSWORD@GLOBELINES.COM.PH (OR if VIP MAC use the other domain)​
    • PASSWORD= GENERATEDPASSWORD(by wimaxtools, yyyxyyyz or other tools)​
    • IDENTITY = MAC@GLOBELINES.COM.PH ( if VIP MAC use the other domain) remove COLON of MAC​
    • 15. On Option ONLY (Auto Prepend Auth Mode and Ignore Cert Verification) are the check​
    • 16. In username textbox only 32 char is the maximum allowed so here the tweak to add the domain​
    • RIGHT CLICK TEXTBOX of USERNAME THE INSPECT ELEMENT then look MAXLENGHT=32 AND CHANGE IT TO 50 OR 100​
    • THEN ADD .ph in USERNAME TO SEE IF OK.​
    • then CLICK APPLY​
    Thats it.. Reboot Then You are Connected​
    • 17. For Smart. Change the Domain used and Frequency Used.​
    • CREDITS to DISCOVERER of this tricks.​

     
  1. good day to all and god bless tanong lang po sna kung gagana po yung config file kasi unusable napo pag renaname new be lang kasi ako maraming salamat
     
  2. d po ako makapasok sa greenpacket.. ung username at password po nakalimutan ko.. pano po ba pag ganun?
     
  3. sa mac lang po ba ito?
     
  4. working po ba talga to?
     
  5. idols.. pano po ung telnet d ko maintindhan
     
  6. thanks idol try ko sa mybro ko
     
  7. wow tnx dami dito mybro lahat na disconnect dahil hindi naka bayad
     
  8. mga tol...na setup ko po lahat pero ayaw pa din mag connect...
     
  9. ayaw naman nung link mga kuya
    ok na pala
     
Loading...
: awaw

Share This Page