Globe youwin m022 openline (100% successful)

[templar1919]

okay na po ibinalik ko lang ulit sa cord kaso nga lang sa suncell pag naka LTE wala na signal pag naka automaitc okay naman kaso mabagal

 

[jakemadz]

pano pala pag ibabalik sa dati?

 

[erin121411]

Please carefully follow steps to successfully open-line your GLOBE YOUWIN M022!
) TRY at your own risk! )

Things needed:

• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.

DISABLE ANTI-VIRUS


Flashing GLOBE YOUWIN M022 LTE MIFI:

DISABLE ANTI-VIRUS

1. Install WTPTP Driver (Optional) to avoid errors.
2. List down the EMEI, S/N, and MAC of target MIFI (YOUWIN M022).
3. Disconnect the MIFI device from your computer, remove battery and sim card.
4. Extract “Openline Globe M022.rar”.
5. Run “SWDownloader.exe” as Administrator.
6. On SWDownloader Interface, Select File > Open > SWD > and select the file “Smart_dashboard_for_Globe_YOUWIN_M022.blf”.
7. Make sure all checkbox is checked.
8. Click the green bulb.
9. Using your USB cable, connect your MIFI device (with battery removed) on the computer, a process should start from the SWDownloader.
10. Wait until the flashing is done and disconnect it from the USB cable.
11. Insert the battery and other telecom sim card (preferably SMART sim to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
12. Turn on your device and hook it up to your PC using your USB Cable.
13. Run your Device Manager on your PC (Windows)
14. Extract “20121130_V5_LTE_MIFI_Generic_Driver.rar”.
15. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted.
16. Extract “MIFITOOL1.0.0.3.exe”.
17. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
18. Select the COM port number which the Marvell “AT Interface” is connected.
19. Input your device’s info which you have listed down earlier, do not click any button yet.
20. Follow the numbering to be clicked and wait, start from 1:

You do not have permission to view the full content of this post. Log in or register now.

1. If successful in each Info write, the app will display a light green Chinese Character.
2. Close “MIFITOOL1.0.0.3.exe”.
3. Reboot your MIFI device and Connect.
4. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
5. Click “PN Required” and enter the MEP CODE “123456”.
6. Wait until the device is already receiving signal.
7. It should be fully openlined.
8. REDO if errors are encountered.

Features:
• Fully Openlined Firmware
• LED Lights Working (LED auto-off feature – does not affect MIFI functionality)

Rewritten by KIMAT (ComputerAngel)…

hello po question lng png mo22 lng b ito o good for mo22t dn salamat

 

[_ALPHA_]

hello po question lng png mo22 lng b ito o good for mo22t dn salamat

Not tested po iyan sa M022T, sa M022 lang po na test. Try at your own risk lang po kung gusto ninyo

 

[nhel02081986]

Successfully openlined my youwin... Thank you so much...

 

[tribal01]

wala paraan kahit wala pc?

 

[yeyintthu]

MY mifi is M022 behind the battery but i enter 192.168.1.1. inside said me M022T.
please explain me.

 

[jongjong]

ty dito boss

 

[DarkScorpio21]

Please carefully follow steps to successfully open-line your GLOBE YOUWIN M022!
) TRY at your own risk! )

Things needed:

• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.

DISABLE ANTI-VIRUS


Flashing GLOBE YOUWIN M022 LTE MIFI:

DISABLE ANTI-VIRUS

1. Install WTPTP Driver (Optional) to avoid errors.
2. List down the EMEI, S/N, and MAC of target MIFI (YOUWIN M022).
3. Disconnect the MIFI device from your computer, remove battery and sim card.
4. Extract “Openline Globe M022.rar”.
5. Run “SWDownloader.exe” as Administrator.
6. On SWDownloader Interface, Select File > Open > SWD > and select the file “Smart_dashboard_for_Globe_YOUWIN_M022.blf”.
7. Make sure all checkbox is checked.
8. Click the green bulb.
9. Using your USB cable, connect your MIFI device (with battery removed) on the computer, a process should start from the SWDownloader.
10. Wait until the flashing is done and disconnect it from the USB cable.
11. Insert the battery and other telecom sim card (preferably SMART sim to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
12. Turn on your device and hook it up to your PC using your USB Cable.
13. Run your Device Manager on your PC (Windows)
14. Extract “20121130_V5_LTE_MIFI_Generic_Driver.rar”.
15. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted.
16. Extract “MIFITOOL1.0.0.3.exe”.
17. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
18. Select the COM port number which the Marvell “AT Interface” is connected.
19. Input your device’s info which you have listed down earlier, do not click any button yet.
20. Follow the numbering to be clicked and wait, start from 1:

You do not have permission to view the full content of this post. Log in or register now.

1. If successful in each Info write, the app will display a light green Chinese Character.
2. Close “MIFITOOL1.0.0.3.exe”.
3. Reboot your MIFI device and Connect.
4. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
5. Click “PN Required” and enter the MEP CODE “123456”.
6. Wait until the device is already receiving signal.
7. It should be fully openlined.
8. REDO if errors are encountered.

Features:
• Fully Openlined Firmware
• LED Lights Working (LED auto-off feature – does not affect MIFI functionality)

Rewritten by KIMAT (ComputerAngel)…

Thanks dito boss openline na globe youwin ko

 

[jirenn]

hello po question lng png mo22 lng b ito o good for mo22t dn salamat

m022 and m022t mag kaiba po ng version yan kaya wag na ninyo itry kung pang m022 lang yan hanap ka po ng pang m022t

 

[Junnelmurillo]

salamatt po broo working na working po sya hehe

***** ako

 

[jirenn]

hello po question lng png mo22 lng b ito o good for mo22t dn salamat

ito ginamit ko kaka unlock ko lang m022t same procedure lang pag dating lang pala dun sa remove battery tapos click green bulb pag ayaw mag start insert battery lang mag start na yun.. hanapin mo na lang dyan yung link ng files yung stock based firmware deadlink na kasi yung iba dyan sa drive yung hanapin mo dyan tapos DL mo dito yung generic firmware at mifi tool
credits kay sir kamputs
https://phcorner.net/threads/407494/page-7#post-9987891

 

[jofox5]

Salamat talaga TS na openline ko yung youwin ko, btw youwin m022 naka lagay sa device ko pero sa cover ng battery is m022T pero Successful naman sa pag openline

 

[daniel198600]

bkt dq po ma access ung 192.168.1.1

 

[daniel198600]

hnggang tut 13 lng po ngwa q p help nmn poh. tenk u

 

[daniel198600]

ok n po pla. tenk u. sovrang nktlong. .slmt lodi. astig. open line na pocketwifi q

 

[nookiebear]

pa help po bakit pag nag open ako SWD sa step 6.. pls update yopur WTPT.sys daw..

 

[dummydummies]

hindi daw updated ung WTPTP

 

[dummydummies]

Ayown nakuha ko rin… Salamat dto ha! appreciated (Y)

 

[_ALPHA_]

hindi daw updated ung WTPTP

Ayown nakuha ko rin… Salamat dto ha! appreciated (Y)

Nice!