Globe youwin m022 openline (100% successful)

[mar090215]

paano po i update yung sa mobile at interface sta at diag hndi makita sa extracted file salamat

 

[zandria]

Pasubok nga ts

 

[jr2res]

help po.. walang signal yung saakin... sana may tumulong

edit: broken po yung image na binigay nyo

 

[daniel198600]

skn d dn ma upd8 ang mobile at. .

 

[daniel198600]

lodi isang tanong p po. bkt dq ma update mobile at intrfce. . . windows10

 

[rouge14]

Please carefully follow steps to successfully open-line your GLOBE YOUWIN M022!
) TRY at your own risk! )

Things needed:

• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.

DISABLE ANTI-VIRUS


Flashing GLOBE YOUWIN M022 LTE MIFI:

DISABLE ANTI-VIRUS

1. Install WTPTP Driver (Optional) to avoid errors.
2. List down the EMEI, S/N, and MAC of target MIFI (YOUWIN M022).
3. Disconnect the MIFI device from your computer, remove battery and sim card.
4. Extract “Openline Globe M022.rar”.
5. Run “SWDownloader.exe” as Administrator.
6. On SWDownloader Interface, Select File > Open > SWD > and select the file “Smart_dashboard_for_Globe_YOUWIN_M022.blf”.
7. Make sure all checkbox is checked.
8. Click the green bulb.
9. Using your USB cable, connect your MIFI device (with battery removed) on the computer, a process should start from the SWDownloader.
10. Wait until the flashing is done and disconnect it from the USB cable.
11. Insert the battery and other telecom sim card (preferably SMART sim to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
12. Turn on your device and hook it up to your PC using your USB Cable.
13. Run your Device Manager on your PC (Windows)
14. Extract “20121130_V5_LTE_MIFI_Generic_Driver.rar”.
15. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted.
16. Extract “MIFITOOL1.0.0.3.exe”.
17. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
18. Select the COM port number which the Marvell “AT Interface” is connected.
19. Input your device’s info which you have listed down earlier, do not click any button yet.
20. Follow the numbering to be clicked and wait, start from 1:
You do not have permission to view the full content of this post. Log in or register now.
21. If successful in each Info write, the app will display a light green Chinese Character.
22. Close “MIFITOOL1.0.0.3.exe”.
23. Reboot your MIFI device and Connect.
24. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
25. Click “PN Required” and enter the MEP CODE “123456”.
26. Wait until the device is already receiving signal.
27. It should be fully openlined.
28. REDO if errors are encountered.
Features:
• Fully Openlined Firmware
• LED Lights Working (LED auto-off feature – does not affect MIFI functionality)

Rewritten by KIMAT (ComputerAngel)…

PA HELP MASTER

 

[jpjgascon]

hindi po madetect sakin.. fix po kaya dito thanks
gust ko na maoepnline for lte only

 

[iLourentVilly]

Salamat dito ng marami. nag eenjoy na kapatid ko ngayon

 

[Mr smith]

Idol yong akin ayaw na mag on pag flash kc accdentally na tinanggal ng bata yong cord may pag asa pa kayang mabuhay to idol?

 

[jirenn]

meron pa yan basta na dedetect yan ng pc

 

[cheezpam0re]

Matsalams! Finally naunlock ko na ang Youwin backup mifi ko.

May paraan ba na ang Globi interface ang nakalagay kahit nakaunlock? Or mas maganda gamitin ang Smurt interface? Medyo matagal kasi to nakatenga (backup mifi) nakalimutan ko na itsura ng UI.

 

[cire28raine]

tinry ko to naopenline naman kaso kinabukasan ayaw n mabuhay ng wifi ko puro restart lng ng restart. tntry ko ulitin yung process kaso ayaw na gumana s swdownloader. nka ilan palit n din ako ng chord at computer. mgagawa p kaya to?

 

[Captain]

thanks po dito!

 

[cryfury18]

Please carefully follow steps to successfully open-line your GLOBE YOUWIN M022!
) TRY at your own risk! )

Things needed:

• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.
• You do not have permission to view the full content of this post. Log in or register now.

DISABLE ANTI-VIRUS


Flashing GLOBE YOUWIN M022 LTE MIFI:

DISABLE ANTI-VIRUS

1. Install WTPTP Driver (Optional) to avoid errors.
2. List down the EMEI, S/N, and MAC of target MIFI (YOUWIN M022).
3. Disconnect the MIFI device from your computer, remove battery and sim card.
4. Extract “Openline Globe M022.rar”.
5. Run “SWDownloader.exe” as Administrator.
6. On SWDownloader Interface, Select File > Open > SWD > and select the file “Smart_dashboard_for_Globe_YOUWIN_M022.blf”.
7. Make sure all checkbox is checked.
8. Click the green bulb.
9. Using your USB cable, connect your MIFI device (with battery removed) on the computer, a process should start from the SWDownloader.
10. Wait until the flashing is done and disconnect it from the USB cable.
11. Insert the battery and other telecom sim card (preferably SMART sim to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
12. Turn on your device and hook it up to your PC using your USB Cable.
13. Run your Device Manager on your PC (Windows)
14. Extract “20121130_V5_LTE_MIFI_Generic_Driver.rar”.
15. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted.
16. Extract “MIFITOOL1.0.0.3.exe”.
17. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
18. Select the COM port number which the Marvell “AT Interface” is connected.
19. Input your device’s info which you have listed down earlier, do not click any button yet.
20. Follow the numbering to be clicked and wait, start from 1:
You do not have permission to view the full content of this post. Log in or register now.
21. If successful in each Info write, the app will display a light green Chinese Character.
22. Close “MIFITOOL1.0.0.3.exe”.
23. Reboot your MIFI device and Connect.
24. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
25. Click “PN Required” and enter the MEP CODE “123456”.
26. Wait until the device is already receiving signal.
27. It should be fully openlined.
28. REDO if errors are encountered.
Features:
• Fully Openlined Firmware
• LED Lights Working (LED auto-off feature – does not affect MIFI functionality)

Rewritten by KIMAT (ComputerAngel)…

tanong ko lang po puwede po ito sa sun prepaid wla kasi po aq smart ... ngaun lang po ako mag oopen line ng LTE GLOBE POCKET WIFI kasi bigay lang po sa akin ng tita ko.. batangas area po ako

 

[shigenojay]

.thanks keep on sharing

 

[Khalid_25]

install successfully pero bakit wala pa rin signal ang smart sim pero ang globe ko meron

 

[Khalid_25]

please help po nagawa ko naman ang instruction pero bakit wala pa rin signal sa smart?

 

[jirenn]

iba pala m022 at m022t hahaha

 

[mjtronics23]

SALAMAT DITO PAPS

 

[jirenn]

tanong ko lang po puwede po ito sa sun prepaid wla kasi po aq smart ... ngaun lang po ako mag oopen line ng LTE GLOBE POCKET WIFI kasi bigay lang po sa akin ng tita ko.. batangas area po ako

pwede ito sa kahit anong wifi basta siguraduhin mo lang po na m022 yung unit.. kasi mag kaiba po ang m022 at m022t
m022 is led type.. meaning wala siyang LCD.. recommend ko din full flash tapos ito para walang problema sa firmware