Updated 9/1/2016:
Sa mga ngrerequest ng eproxy + ovpn idadagdag ko na dito.
This method is simpler as you will just need eProxy and its built-in bitvise, plink, ovpn client. So it means only one program to use.
Important thing here is collecting properly and inputting the correct data to eproxy, The eproxy setup is almost just the same as the (eproxy+ovpn method) except for the certificate of ovpn. I will show how its done properly.
First, create ssh account, I will use fastssh, but you can use any free ssh site that has their own squid server like (bestvpnssh,skyssh,mytunneling etc.) to take advantage of their squid server (esp. for Smart/TNT) rather than searching in proxy server sites,and the one found in proxy server sites doesn't last that long so at least ang poproblemahin mo na lang ay ang paghahanap ng payload.
Take note of all the account information to be used in eproxy, The numbering on this list is the same as the one in screen shot photos to understand better if which item goes where.
1. Proxy or Squid: ca.serverip.co:8080 or 149.56.181.1:8080 (for Smart/TNT)
203.177.42.214:8080 (for Globe/TM MGC)
2. Listen port: 8080 (check your local Lport)
3. SSH : Port ca.serverip.co:22 (you can also convert this to numeric ip
so it should be 149.56.181.1:22)
4. VPN : Port ca.serverip.co:22 / 127.0.0.1:22 (any)
*Sometimes its better to use the numeric ip than the ip name so use the site "host to ip" or similar, to convert the host name to numeric
5. Since eProxy for PC doesn't have a dedicated payload generator we'll have to generate it somewhere else. I suggest generating a couple of your working payload in http injector and save it first to a notepad. For generating payload, I'll use "m.facebook.com" for Globe/TM and "h.facebook.com for Smart/TNT as my sample (as of this writing this is still a working payload) , below procedure, works for me but feel free to use your method and payload.
Generate Payload
-->for mgc globe/tm (this is my formula)
m.facebook.com + connect + normal injection + online host + keep alive
6. This is the generated code:
CONNECT [host_port] [protocol][crlf]Host: m.facebook.com[crlf]X-Online-Host: m.facebook.com[crlf]Connection: Keep-Alive[crlf][crlf]
-->for smart/tnt (this is my formula)
h.facebook.com+post+back injection+back query+dual connect+keep alive
7. This is the generated code
CONNECT [host_port]@h.facebook.com HTTP/1.1[crlf][crlf]PUT You do not have permission to view the full content of this post. Log in or register now. [protocol][crlf]Host: h.facebook.com[crlf]X-Online-Host: h.facebook.com[crlf]Connection: Keep-Alive[crlf]CONNECT [host_port]@h.facebook.com [protocol][crlf][crlf]
8. Username: fastssh.com-tutorial
9. Password: 12345
10. Tick bitvise/plink
11. Click start
Check Screenshot !!!
plink bitvise
Updated 9/1/2016:
For Eproxy + Ovpn Settings
1. For the eproxy setting you need to add the certificate found in your ovpn config file to the eproxy certificate tab. Remember my kanya kanyang config file and bawat server ganun din sa certificate.
-----BEGIN CERTIFICATE-----
....
...
-----END CERTIFICATE-----
copy nyo yung nasa loob nito..check screenshot.
2. And copy this code to your ovpn config file, replace the xxx.xxx.xx.xx with your dedicated squid proxy, no need for port number.
http-proxy 127.0.0.1 8080
http-proxy-retry
route xxx.xxx.xx.xx 255.255.255.255 net_gateway
route-delay 5
In eproxy installation folder you will find a template.ovpn. If you will be using eproxy's default ovpn client this is the default config that exproxy will load. so delete all text in there and replace it with your own edited config (keep the name template.ovpn).
X:\"Your Install Location"\eProxy PC Edition\bin\OpenVPN\config\template.ovpn
3. For the configuration tab the same pa rin nung sa ssh, pro piliin nyo ung ovpn dun sa may start tab.
For the MGC check my other thread. sa MGC di n kailangan ng eproxy directa lang na ovpn.
You do not have permission to view the full content of this post. Log in or register now.
Good Luck!
Sa mga ngrerequest ng eproxy + ovpn idadagdag ko na dito.
This method is simpler as you will just need eProxy and its built-in bitvise, plink, ovpn client. So it means only one program to use
Important thing here is collecting properly and inputting the correct data to eproxy, The eproxy setup is almost just the same as the (eproxy+ovpn method) except for the certificate of ovpn. I will show how its done properly.
First, create ssh account, I will use fastssh, but you can use any free ssh site that has their own squid server like (bestvpnssh,skyssh,mytunneling etc.) to take advantage of their squid server (esp. for Smart/TNT) rather than searching in proxy server sites,and the one found in proxy server sites doesn't last that long so at least ang poproblemahin mo na lang ay ang paghahanap ng payload.
Take note of all the account information to be used in eproxy, The numbering on this list is the same as the one in screen shot photos to understand better if which item goes where.
1. Proxy or Squid: ca.serverip.co:8080 or 149.56.181.1:8080 (for Smart/TNT)
203.177.42.214:8080 (for Globe/TM MGC)
2. Listen port: 8080 (check your local Lport)
3. SSH : Port ca.serverip.co:22 (you can also convert this to numeric ip
so it should be 149.56.181.1:22)
4. VPN : Port ca.serverip.co:22 / 127.0.0.1:22 (any)
*Sometimes its better to use the numeric ip than the ip name so use the site "host to ip" or similar, to convert the host name to numeric
5. Since eProxy for PC doesn't have a dedicated payload generator we'll have to generate it somewhere else. I suggest generating a couple of your working payload in http injector and save it first to a notepad. For generating payload, I'll use "m.facebook.com" for Globe/TM and "h.facebook.com for Smart/TNT as my sample (as of this writing this is still a working payload) , below procedure, works for me but feel free to use your method and payload.
Generate Payload
-->for mgc globe/tm (this is my formula)
m.facebook.com + connect + normal injection + online host + keep alive
6. This is the generated code:
CONNECT [host_port] [protocol][crlf]Host: m.facebook.com[crlf]X-Online-Host: m.facebook.com[crlf]Connection: Keep-Alive[crlf][crlf]
-->for smart/tnt (this is my formula)
h.facebook.com+post+back injection+back query+dual connect+keep alive
7. This is the generated code
CONNECT [host_port]@h.facebook.com HTTP/1.1[crlf][crlf]PUT You do not have permission to view the full content of this post. Log in or register now. [protocol][crlf]Host: h.facebook.com[crlf]X-Online-Host: h.facebook.com[crlf]Connection: Keep-Alive[crlf]CONNECT [host_port]@h.facebook.com [protocol][crlf][crlf]
8. Username: fastssh.com-tutorial
9. Password: 12345
10. Tick bitvise/plink
11. Click start
Check Screenshot !!!
plink bitvise
Updated 9/1/2016:
For Eproxy + Ovpn Settings
1. For the eproxy setting you need to add the certificate found in your ovpn config file to the eproxy certificate tab. Remember my kanya kanyang config file and bawat server ganun din sa certificate.
-----BEGIN CERTIFICATE-----
....
...
-----END CERTIFICATE-----
copy nyo yung nasa loob nito..check screenshot.
2. And copy this code to your ovpn config file, replace the xxx.xxx.xx.xx with your dedicated squid proxy, no need for port number.
http-proxy 127.0.0.1 8080
http-proxy-retry
route xxx.xxx.xx.xx 255.255.255.255 net_gateway
route-delay 5
In eproxy installation folder you will find a template.ovpn. If you will be using eproxy's default ovpn client this is the default config that exproxy will load. so delete all text in there and replace it with your own edited config (keep the name template.ovpn).
X:\"Your Install Location"\eProxy PC Edition\bin\OpenVPN\config\template.ovpn
3. For the configuration tab the same pa rin nung sa ssh, pro piliin nyo ung ovpn dun sa may start tab.
For the MGC check my other thread. sa MGC di n kailangan ng eproxy directa lang na ovpn.
You do not have permission to view the full content of this post. Log in or register now.
Good Luck!
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: