d nga ma flash boss gnamitan ko ng usb ttl eto output
onchip
NF id boot!
Nand save 0x8A000021
Sec check o¦¦123
trying to boot from partition fastboot
source_addr =0x00040024
boot from flash errorcode =0x00000000
check fastboot ok
56
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
[8.375363][*DLOAD_MAIN*] dload_init_comm_flag:650: ok
[8.376306][*DLOAD_MAIN*] dload_init_controller:679: ok
[8.376464][*DLOAD_HDLC*] dload_hdlc_init:250: ok
[8.376669][*DLOAD_FLASH*] dload_flash_init_phy_info:1031: block size: 0x20000, page size: 0x800, oob size: 0x10
[8.376822][*DLOAD_FLASH*] dload_init_spec_part_name:1070: not enable the part mapping.
[8.377803][*DLOAD_FLASH*] DloadUpdateKernelbkPartition:679: No need to update kernelbk partition
[8.378208][*DLOAD_FLASH*] dload_init_find_partitions:888: ok.
[8.378438][*DLOAD_UBI*] DloadUbiUpdateUbiVolInfoTbl:189: /proc/partitions not existed, return OK.
[8.378726][*DLOAD_MAIN*] DloadGetMmcPartId:416: it is not support eMMC
[8.381404][*DLOAD_MAIN*] DloadGetMmcPartId:416: it is not support eMMC
[8.385467][*DLOAD_MAIN*] dload_get_part_state:1165: Complete partition.
[8.392420][*DLOAD_OEM*] dload_oem_init_cache:830: cache init ok.
[8.392686][*DLOAD_FLASH*] dload_flash_init:4027: ok
[8.392877][*DLOAD_SHOW*] DloadShowGetFeature:136: ledFeature = 1
[8.392978][*DLOAD_SHOW*] DloadShowGetFeature:137: lcdFeature = 0
[8.393088][*DLOAD_SHOW*] DloadFetchShowList:81: pathListNum = 11
[8.393302][*DLOAD_SHOW*] DloadFetchShowList:103: stateListNum = 80
[8.393775][*DLOAD_SIGN*] dload_sign_init:565: Go, Do verify!
[8.393882][*DLOAD_SIGN*] dload_sign_init:571: server sign
[8.393935][*DLOAD_SIGN*] dload_sign_init:594: Init ok.
[8.394116][*DLOAD_MAIN*] dload_init:899: all module init ok.
[8.394213][*DLOAD_MAIN*] dload_mtc_update_images:7569: check multi carrier flag.
[8.394411][*DLOAD_MTCARRIER*] dload_mtc_read_status_file:2053: Fail to access the /online/mtc/mtc_updata_status.
[8.394492][*DLOAD_MAIN*] dload_mtc_process_update_result:7774: Mtc begin to handle ret_mtc:1!
[8.422467][*DLOAD_MAIN*] dload_mtc_process_update_result:7788: MTC image need not to update.
[8.425041][*DLOAD_AUTO*] dload_auto_updata_enter_check:107: auto update flag exist.
[8.427661][*DLOAD_AUTO*] dload_auto_update_process:715: dload_multiupg_flag=1!
[8.443547][*DLOAD_MUPG*] dload_multiupg:1751: start_time = 8
[8.446328][*DLOAD_MUPG*] dload_init_bridge_ethernet:311: get ethnum 1 .
[8.507514][*DLOAD_MUPG*] dload_add_multigroup:267: join in 224.0.0.119, 770000e0, local 108a8c0.
[8.520455][*DLOAD_MUPG*] dload_init_resource:1521: Multicast init success, multi_sockfd is 4
[13.37977][*DLOAD_MUPG*] dload_parse_packageheader:653: wlan interface not enable, ignored!
[13.50659][*DLOAD_MUPG*] dload_init_rcev_buffheader:561: The First Multi-upgrade Package, package type:1!
[13.53433][*DLOAD_MUPG*] dload_init_rcev_buffheader:565: the src force upgrade mode is : 1
[13.56138][*DLOAD_MUPG*] dload_init_rcev_buffheader:571: the set force upgrade mode is : 1
[13.58785][*DLOAD_MUPG*] dload_init_rcev_buffheader:608: rcev_buff->bit_map = [3636]
[13.71600][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 7
[13.77642][*DLOAD_MUPG*] dload_check_enough_space_rw:513: free size is [39571456], target packet size is [29781748]
[13.85550][*DLOAD_MUPG*] dload_check_enough_flash_save_pkg:534: enough space to save the packet!
[13.92744][*DLOAD_MUPG*] dload_save_package:882: File </online/firmware1.bin> open successfully!
[14.249793]#
[15.438751]#
[16.627089]#
[17.852734]#
[18.951508]#
[20.30265]#
[21.108964]#
[22.184481]#
[23.360211]#
[24.430927]#
[25.505576]#
[26.592644]#
[27.667331]#
[28.750336]#
[29.823091]#
[30.892271]#
[31.968529]#
[33.50877]#
[34.133137]#
[35.207688]#
[36.301425]#
[37.373692]#
[38.450377]#
[39.537339]#
[40.612995]#
[41.686536]#
[42.768823]#
[43.842793]#
[47.652946][*DLOAD_MUPG*] dload_save_package_and_upg:1410: All Recved Package is [719c]
[47.674734][*DLOAD_MUPG*] dload_multi_bin_proc:1180: bin_head.magic=53eca7f8
[47.692093][*DLOAD_MUPG*] dload_split_file:983: out_file_num(2).
[47.699384][*DLOAD_MUPG*] dload_split_file:1037: output to (/online/web_ui.bin), size(5736248)
[50.89581][*DLOAD_MUPG*] dload_split_file:1013: truncate file(/online/firmware1.bin), size(24045412) !
[50.118218][*DLOAD_MUPG*] dload_excute_upg:1293: multi bin update support!
[50.125736][*DLOAD_MUPG*] dload_excute_upg:1326: download packet through multicast success!
[50.128416][*DLOAD_MUPG*] dload_is_completed:1495: package_header->policy = [1]
[50.131133][*DLOAD_MUPG*] dload_is_completed:1496: rcev_buff->is_hgw_upg_complete = [1]
[50.133777][*DLOAD_MUPG*] dload_multiupg:1771: RecvAndProcData completed and successfully!
brctl: bridge br0: Device or resource busy
[50.141161][*DLOAD_MUPG*] dload_multiupg:1794: end_time = 50
[50.143779][*DLOAD_AUTO*] dload_auto_update_process:723: FORCEBOOT :: dload_multiupg ok, Enter auto update ...
[50.156394][*DLOAD_PKG*] dload_check_mmcupd_condition:171: sdcard upgrade magic not exist.
[50.156572][*DLOAD_PKG*] dload_check_online_condition:452: status=60,up_mode=3,type=3
[50.159429][*DLOAD_MAIN*] dload_check_update_type:557: is online upgrade
[50.159564][*DLOAD_MAIN*] dload_enter_update:7868: ###################### Online or SD Dload Start ######################
[50.191137][*DLOAD_MAIN*] dload_enter_update:7871: system ret[0]
[50.203411][*DLOAD_MAIN*] dload_enter_board_update:6853: system ret[0]
[50.206736][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 1
[50.209758][*DLOAD_PKG*] dload_compare_update_id:632: not update firmware1.bin!
[50.214758][*DLOAD_SIGN*] dload_is_sign_bin:2891: Sign flag = 268.
[50.217658][*DLOAD_SIGN*] dload_sign_init:524: init ok!
[50.217817][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.221277][*DLOAD_SIGN*] dload_check_security_file:3106: only webui update!
[50.224509][*DLOAD_SIGN*] dload_check_component_sign:2651: Check component file id = 0x55.
[50.248222][*DLOAD_COMPRESS*] algor_discern:208: algorithm [zlib] fetch SUCCESS.
[50.248440][*DLOAD_COMPRESS*] instance_algor_stream:253: algorithm [zlib] fetch SUCCESS.
[50.248725][*DLOAD_SIGN*] dload_data_decode:1897: Data uncompress end.
[50.248814][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 0 ,file id = 0x550000.
[50.248871][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.251542][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 1 ,file id = 0x5b0000.
[50.251629][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.254191][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 2 ,file id = 0xf1f2f3f4.
[50.254875][*DLOAD_SIGN*] dload_verify_pubkey:1064: Public key1 check success.
[50.285692][*DLOAD_SIGN*] dload_verify_sign_attachment:3023: verify sign attachment ok !
[50.288483][*DLOAD_SIGN*] dload_check_sign_verinfo:2273: Bin file is corresponded with sign V1.2/V1.3!
[50.291150][*DLOAD_SIGN*] dload_get_auth_info:2059: 0, 25, 0, 0, 0
[50.293944][*DLOAD_SIGN*] dload_get_auth_info:2066: , WEBUI_1003.999.1.7.03_CPE, , ,
[50.296774][*DLOAD_SIGN*] dload_get_auth_info:2074: get auth info Ok
[50.299378][*DLOAD_MAIN*] dload_verify_dload_id:5675: Enter: check dload id.
[50.299487][*DLOAD_MAIN*] dload_verify_dload_id:5683: Auth dload donot check dload id.
[50.299565][*DLOAD_MAIN*] dload_verify_c_ver:6375: Enter: check c ver
[50.299641][*DLOAD_SIGN*] dload_get_auth_info:2040: Bin file execute auth already
[50.302305][*DLOAD_SIGN*] dload_get_auth_info:2040: Bin file execute auth already
[50.304940][*DLOAD_MAIN*] dload_verify_webui_ver:6160: Begin to check webui c ver.
[50.305057][*DLOAD_AT*] dload_get_webver:627: webui ver is WEBUI_1003.999.1.3.158_CPE
[50.305258][*DLOAD_MAIN*] dload_verify_webui_ver:6171: WEBUI_1003.999.1.3.158_CPE, WEBUI_1003.999.1.7.03_CPE
[50.305399][*DLOAD_MAIN*] dload_check_datalock_status:5455: datalock is locked or get data error
[50.307934][*DLOAD_MAIN*] dload_verify_webui_ver:6245: webui feature is legal.
[50.308021][*DLOAD_MAIN*] dload_verify_webui_ver:6333: webui C verify failed
[50.308077][*DLOAD_SIGN*] dload_check_sign_verinfo:2282: C version check failed
[50.313691][*DLOAD_SIGN*] dload_check_component_sign:2719: Get auth info from ram fail !
[50.318951][*DLOAD_SIGN*] dload_check_security_file:3120: Check fw sign data error!
[50.321717][*DLOAD_SIGN*] dload_check_inside_load_safety:3762: Online update verify signature error.
[50.325058][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 5
[53.334402][*DLOAD_AUTO*] dload_set_component_status:309: save component_status:110 to /data/userdata/update_info.bin.
[53.341988][*DLOAD_SIGN*] dload_check_inside_load_safety:3773: Remove online file ok
[53.346390][*DLOAD_MAIN*] dload_judge_update_state:6801: online update failed
[54.349232][*DLOAD_MAIN*] dload_set_part_state:1218: Upgrade times is 2.
[54.349379][*DLOAD_MAIN*] main:8096: Upgrade failed times 1.
[54.352069][*DLOAD_MAIN*] dload_mtc_update_images:7569: check multi carrier flag.
[54.352214][*DLOAD_MTCARRIER*] dload_mtc_read_status_file:2053: Fail to access the /online/mtc/mtc_updata_status.
[54.352414][*DLOAD_MAIN*] dload_mtc_process_update_result:7774: Mtc begin to handle ret_mtc:1!
[54.355092][*DLOAD_MAIN*] dload_mtc_process_update_result:7788: MTC image need not to update.
[54.357787][*DLOAD_AUTO*] dload_auto_updata_enter_check:107: auto update flag exist.
[54.366653][*DLOAD_PKG*] dload_check_mmcupd_condition:171: sdcard upgrade magic not exist.
[54.366833][*DLOAD_PKG*] dload_check_online_condition:452: status=80,up_mode=3,type=3
[54.369495][*DLOAD_MAIN*] dload_enter_update:7912: ###################### USB Dload Start ######################
[54.369589][*DLOAD_MAIN*] dload_set_part_state:1218: Upgrade times is 2.