Di nyo mafaflash yan kahit anong gawin, may rsa key para makapag flash or madebrand sa huawei firmware ang telco's locked na modem.
Kung iload nyo yung usbloader na kasama, make sure may ready na kayong pambiling bagong modem or isa pang modem kapalit ng modem na sinira nyo. Thanks!
d nga ma flash boss gnamitan ko ng usb ttl eto output
onchip
NF id boot!
Nand save 0x8A000021
Sec check o¦¦123
trying to boot from partition fastboot
source_addr =0x00040024
boot from flash errorcode =0x00000000
check fastboot ok
56
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
[8.375363][*DLOAD_MAIN*] dload_init_comm_flag:650: ok
[8.376306][*DLOAD_MAIN*] dload_init_controller:679: ok
[8.376464][*DLOAD_HDLC*] dload_hdlc_init:250: ok
[8.376669][*DLOAD_FLASH*] dload_flash_init_phy_info:1031: block size: 0x20000, page size: 0x800, oob size: 0x10
[8.376822][*DLOAD_FLASH*] dload_init_spec_part_name:1070: not enable the part mapping.
[8.377803][*DLOAD_FLASH*] DloadUpdateKernelbkPartition:679: No need to update kernelbk partition
[8.378208][*DLOAD_FLASH*] dload_init_find_partitions:888: ok.
[8.378438][*DLOAD_UBI*] DloadUbiUpdateUbiVolInfoTbl:189: /proc/partitions not existed, return OK.
[8.378726][*DLOAD_MAIN*] DloadGetMmcPartId:416: it is not support eMMC
[8.381404][*DLOAD_MAIN*] DloadGetMmcPartId:416: it is not support eMMC
[8.385467][*DLOAD_MAIN*] dload_get_part_state:1165: Complete partition.
[8.392420][*DLOAD_OEM*] dload_oem_init_cache:830: cache init ok.
[8.392686][*DLOAD_FLASH*] dload_flash_init:4027: ok
[8.392877][*DLOAD_SHOW*] DloadShowGetFeature:136: ledFeature = 1
[8.392978][*DLOAD_SHOW*] DloadShowGetFeature:137: lcdFeature = 0
[8.393088][*DLOAD_SHOW*] DloadFetchShowList:81: pathListNum = 11
[8.393302][*DLOAD_SHOW*] DloadFetchShowList:103: stateListNum = 80
[8.393775][*DLOAD_SIGN*] dload_sign_init:565: Go, Do verify!
[8.393882][*DLOAD_SIGN*] dload_sign_init:571: server sign
[8.393935][*DLOAD_SIGN*] dload_sign_init:594: Init ok.
[8.394116][*DLOAD_MAIN*] dload_init:899: all module init ok.
[8.394213][*DLOAD_MAIN*] dload_mtc_update_images:7569: check multi carrier flag.
[8.394411][*DLOAD_MTCARRIER*] dload_mtc_read_status_file:2053: Fail to access the /online/mtc/mtc_updata_status.
[8.394492][*DLOAD_MAIN*] dload_mtc_process_update_result:7774: Mtc begin to handle ret_mtc:1!
[8.422467][*DLOAD_MAIN*] dload_mtc_process_update_result:7788: MTC image need not to update.
[8.425041][*DLOAD_AUTO*] dload_auto_updata_enter_check:107: auto update flag exist.
[8.427661][*DLOAD_AUTO*] dload_auto_update_process:715: dload_multiupg_flag=1!
[8.443547][*DLOAD_MUPG*] dload_multiupg:1751: start_time = 8
[8.446328][*DLOAD_MUPG*] dload_init_bridge_ethernet:311: get ethnum 1 .
[8.507514][*DLOAD_MUPG*] dload_add_multigroup:267: join in 224.0.0.119, 770000e0, local 108a8c0.
[8.520455][*DLOAD_MUPG*] dload_init_resource:1521: Multicast init success, multi_sockfd is 4
[13.37977][*DLOAD_MUPG*] dload_parse_packageheader:653: wlan interface not enable, ignored!
[13.50659][*DLOAD_MUPG*] dload_init_rcev_buffheader:561: The First Multi-upgrade Package, package type:1!
[13.53433][*DLOAD_MUPG*] dload_init_rcev_buffheader:565: the src force upgrade mode is : 1
[13.56138][*DLOAD_MUPG*] dload_init_rcev_buffheader:571: the set force upgrade mode is : 1
[13.58785][*DLOAD_MUPG*] dload_init_rcev_buffheader:608: rcev_buff->bit_map = [3636]
[13.71600][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 7
[13.77642][*DLOAD_MUPG*] dload_check_enough_space_rw:513: free size is [39571456], target packet size is [29781748]
[13.85550][*DLOAD_MUPG*] dload_check_enough_flash_save_pkg:534: enough space to save the packet!
[13.92744][*DLOAD_MUPG*] dload_save_package:882: File </online/firmware1.bin> open successfully!
[14.249793]#
[15.438751]#
[16.627089]#
[17.852734]#
[18.951508]#
[20.30265]#
[21.108964]#
[22.184481]#
[23.360211]#
[24.430927]#
[25.505576]#
[26.592644]#
[27.667331]#
[28.750336]#
[29.823091]#
[30.892271]#
[31.968529]#
[33.50877]#
[34.133137]#
[35.207688]#
[36.301425]#
[37.373692]#
[38.450377]#
[39.537339]#
[40.612995]#
[41.686536]#
[42.768823]#
[43.842793]#
[47.652946][*DLOAD_MUPG*] dload_save_package_and_upg:1410: All Recved Package is [719c]
[47.674734][*DLOAD_MUPG*] dload_multi_bin_proc:1180: bin_head.magic=53eca7f8
[47.692093][*DLOAD_MUPG*] dload_split_file:983: out_file_num(2).
[47.699384][*DLOAD_MUPG*] dload_split_file:1037: output to (/online/web_ui.bin), size(5736248)
[50.89581][*DLOAD_MUPG*] dload_split_file:1013: truncate file(/online/firmware1.bin), size(24045412) !
[50.118218][*DLOAD_MUPG*] dload_excute_upg:1293: multi bin update support!
[50.125736][*DLOAD_MUPG*] dload_excute_upg:1326: download packet through multicast success!
[50.128416][*DLOAD_MUPG*] dload_is_completed:1495: package_header->policy = [1]
[50.131133][*DLOAD_MUPG*] dload_is_completed:1496: rcev_buff->is_hgw_upg_complete = [1]
[50.133777][*DLOAD_MUPG*] dload_multiupg:1771: RecvAndProcData completed and successfully!
brctl: bridge br0: Device or resource busy
[50.141161][*DLOAD_MUPG*] dload_multiupg:1794: end_time = 50
[50.143779][*DLOAD_AUTO*] dload_auto_update_process:723: FORCEBOOT :: dload_multiupg ok, Enter auto update ...
[50.156394][*DLOAD_PKG*] dload_check_mmcupd_condition:171: sdcard upgrade magic not exist.
[50.156572][*DLOAD_PKG*] dload_check_online_condition:452: status=60,up_mode=3,type=3
[50.159429][*DLOAD_MAIN*] dload_check_update_type:557: is online upgrade
[50.159564][*DLOAD_MAIN*] dload_enter_update:7868: ###################### Online or SD Dload Start ######################
[50.191137][*DLOAD_MAIN*] dload_enter_update:7871: system ret[0]
[50.203411][*DLOAD_MAIN*] dload_enter_board_update:6853: system ret[0]
[50.206736][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 1
[50.209758][*DLOAD_PKG*] dload_compare_update_id:632: not update firmware1.bin!
[50.214758][*DLOAD_SIGN*] dload_is_sign_bin:2891: Sign flag = 268.
[50.217658][*DLOAD_SIGN*] dload_sign_init:524: init ok!
[50.217817][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.221277][*DLOAD_SIGN*] dload_check_security_file:3106: only webui update!
[50.224509][*DLOAD_SIGN*] dload_check_component_sign:2651: Check component file id = 0x55.
[50.248222][*DLOAD_COMPRESS*] algor_discern:208: algorithm [zlib] fetch SUCCESS.
[50.248440][*DLOAD_COMPRESS*] instance_algor_stream:253: algorithm [zlib] fetch SUCCESS.
[50.248725][*DLOAD_SIGN*] dload_data_decode:1897: Data uncompress end.
[50.248814][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 0 ,file id = 0x550000.
[50.248871][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.251542][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 1 ,file id = 0x5b0000.
[50.251629][*DLOAD_SIGN*] dload_check_component_type:2095: Webui C check ver
[50.254191][*DLOAD_SIGN*] dload_get_sign_body:1269: Index = 2 ,file id = 0xf1f2f3f4.
[50.254875][*DLOAD_SIGN*] dload_verify_pubkey:1064: Public key1 check success.
[50.285692][*DLOAD_SIGN*] dload_verify_sign_attachment:3023: verify sign attachment ok !
[50.288483][*DLOAD_SIGN*] dload_check_sign_verinfo:2273: Bin file is corresponded with sign V1.2/V1.3!
[50.291150][*DLOAD_SIGN*] dload_get_auth_info:2059: 0, 25, 0, 0, 0
[50.293944][*DLOAD_SIGN*] dload_get_auth_info:2066: , WEBUI_1003.999.1.7.03_CPE, , ,
[50.296774][*DLOAD_SIGN*] dload_get_auth_info:2074: get auth info Ok
[50.299378][*DLOAD_MAIN*] dload_verify_dload_id:5675: Enter: check dload id.
[50.299487][*DLOAD_MAIN*] dload_verify_dload_id:5683: Auth dload donot check dload id.
[50.299565][*DLOAD_MAIN*] dload_verify_c_ver:6375: Enter: check c ver
[50.299641][*DLOAD_SIGN*] dload_get_auth_info:2040: Bin file execute auth already
[50.302305][*DLOAD_SIGN*] dload_get_auth_info:2040: Bin file execute auth already
[50.304940][*DLOAD_MAIN*] dload_verify_webui_ver:6160: Begin to check webui c ver.
[50.305057][*DLOAD_AT*] dload_get_webver:627: webui ver is WEBUI_1003.999.1.3.158_CPE
[50.305258][*DLOAD_MAIN*] dload_verify_webui_ver:6171: WEBUI_1003.999.1.3.158_CPE, WEBUI_1003.999.1.7.03_CPE
[50.305399][*DLOAD_MAIN*] dload_check_datalock_status:5455: datalock is locked or get data error
[50.307934][*DLOAD_MAIN*] dload_verify_webui_ver:6245: webui feature is legal.
[50.308021][*DLOAD_MAIN*] dload_verify_webui_ver:6333: webui C verify failed
[50.308077][*DLOAD_SIGN*] dload_check_sign_verinfo:2282: C version check failed
[50.313691][*DLOAD_SIGN*] dload_check_component_sign:2719: Get auth info from ram fail !
[50.318951][*DLOAD_SIGN*] dload_check_security_file:3120: Check fw sign data error!
[50.321717][*DLOAD_SIGN*] dload_check_inside_load_safety:3762: Online update verify signature error.
[50.325058][*DLOAD_SHOW*] DloadShowNoticeState:423: upgrade state changed = 5
[53.334402][*DLOAD_AUTO*] dload_set_component_status:309: save component_status:110 to /data/userdata/update_info.bin.
[53.341988][*DLOAD_SIGN*] dload_check_inside_load_safety:3773: Remove online file ok
[53.346390][*DLOAD_MAIN*] dload_judge_update_state:6801: online update failed
[54.349232][*DLOAD_MAIN*] dload_set_part_state:1218: Upgrade times is 2.
[54.349379][*DLOAD_MAIN*] main:8096: Upgrade failed times 1.
[54.352069][*DLOAD_MAIN*] dload_mtc_update_images:7569: check multi carrier flag.
[54.352214][*DLOAD_MTCARRIER*] dload_mtc_read_status_file:2053: Fail to access the /online/mtc/mtc_updata_status.
[54.352414][*DLOAD_MAIN*] dload_mtc_process_update_result:7774: Mtc begin to handle ret_mtc:1!
[54.355092][*DLOAD_MAIN*] dload_mtc_process_update_result:7788: MTC image need not to update.
[54.357787][*DLOAD_AUTO*] dload_auto_updata_enter_check:107: auto update flag exist.
[54.366653][*DLOAD_PKG*] dload_check_mmcupd_condition:171: sdcard upgrade magic not exist.
[54.366833][*DLOAD_PKG*] dload_check_online_condition:452: status=80,up_mode=3,type=3
[54.369495][*DLOAD_MAIN*] dload_enter_update:7912: ###################### USB Dload Start ######################
[54.369589][*DLOAD_MAIN*] dload_set_part_state:1218: Upgrade times is 2.
