Tutorial Smart bro evoluzn fx pr2l unlocking/reviving (update 12/01/16)

[gaffer101]

I'm stuck people. successfully finished the final step, but mifi says "no service" when I open the web browser I can see the different simcard is recognised but no signal bars

 

[winrichdumlao08]

Na stuck na po ako sa steps below. Nevermind the numbering di ko po matanggal eh copy paste lang yan from the orig instruction. Paano po malalman kung tapos na yung flashing kasi pag ka click ko ng green bulb pinlug ko na yung pocket wifi tapos nag b blink yung mga led lights pero walang message or whatsoever na lumalabas sa computer pano malalaman kung nagwo work ba talaga may pipindutin pa ba? Tapos walang mobile at interface at mobile at diag sa device manager ko pahelp naman po sana

1. Wait until the flashing is done and disconnect it from the USB cable.
   
2. Insert the battery and other telecom sim card (other sim cards besides SMART to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
3. Turn on your device and hook it up to your PC using your USB Cable.
   
4. Run your Device Manager on your PC (Windows)
   
5. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted earlier.
   
   

 

[dogstyle007]

gaffer101 you should try and use another firmware to flash... it is possible that the firmware you used is not the perfect one for your model of mifi..

 

[gaffer101]

dogstyle007 zedicus is it possible that any of you has the software for mo23it mifi. I Would be grateful.

 

[watawat08]

boss pwede b sa globe youwin m022 yan,, my dload kc aq na firmware tapos nwala ung signal ng lte q tapos pg nilagyan q ng smart undeffined ung nka lagay,, thnx

 

[Billycaine]

How to change apn po using this model? Thanks talaga sa makatulong...

 

[Minishroom]

Sakin po tama nman po board ko successful na na openline ko problem 3g lng smart nya pero nung nag openline ako 4G pa sya. Panu gagawin ko boss??

 

[rexbuster]

salamat sana maging ok ang lahat

 

[lalakingbigo]

May fix naba pr2l? Sayang tambak nalang sya up to now walang signal

 

[karry025]

Sana pwede ko siya madownload kahit di pa established T_T

 

[Reymosz]

ts o sino man marunong mag openline paki tulong po please

Model: FX PR2
IMEI: 867574020071847

 

[agyirigo]

Please I need help..... I need the firmware version for lo2c

 

[kamputs]

Wala na ata sasagot sa mga tanong ninyo pati siguro sa development o pag openline ng mga bagong models mukhang hinde na din mag lalabas ng firmware, mga loko kasi ung iba ni like man lang o thanks wala ng hit and run na nga lang binenta pa o pinagkakitaan yung firmwares na pinaghirapan ayusin at i-modify ng mga developers at modders dito sa PHCorner.

 

[kallinsba]

Hello guys. am trying to find a fix for wtptp Error: FBF_versionNotMatch error code 0x10. i need some one to provide me with the "wrong Mac and imei " that come after flashing with any firmware. thanks.

 

[dicey]

Im willing to help pa sana and revive this thread. Kaso i totally brick my pr2l after trying to follow the tutorial on match error. Namali lang ako ng pghugot during erase flash. No sign of life . Kaya bumili na lang ako p3rl . Anyway ill recover my last working files basta wag nio lang gamitin yung 2016 uganda hirap and risky i downgrade

 

[dogstyle007]

@kallinsba install the wtptp driver or re-update it... that should fix your problem

 

[dogstyle007]

@gaffer101 i think there is a site you can get those file... the link has been posted in this thread... try searching for it from page 1 you will see it

 

[dogstyle007]

@agyirigo go through the thread from page 1 you will find it

 

[floker24]

may fix ba sa smart lte signal globe lang talaga meron fx pr2 sun gamit ko

 

[mr joker 10]

Keep sharing