Closed Pldt fibr dns setting

[Mharkkhim]

Tanong lng po sana kung ok lng ba palitan ung dns setting sa loob ng pldt fibr ui? at kung alam nyo po kung panu pede po patulong? thanks in advance..

 

[WALANGMAGAWA]

kahit anong palit mo niyan wala ding mangyayari nag auto reset kasi

 

[Mharkkhim]

kahit anong palit mo niyan wala ding mangyayari nag auto reset kasi

wala na pla akong magagawa nito.. thanks po sa pag sagot..

 

[WALANGMAGAWA]

iwan ko ba sa modem na yan kahit tech. nila walang alam hehehehehe

 

[Mharkkhim]

iwan ko ba sa modem na yan kahit tech. nila walang alam hehehehehe

oo nga po eh.. minsan ikw nlng mismo yung makakasagot sa tanong mo after mag research.. lol
thanks po.. at least nka kuha ako ng sagot dito..

 

[WALANGMAGAWA]

boss try mo kaya >>> Solution
1. Turn off your router
2. Unplug / Disconnect fiber cable from the router
3. TURN IT BACK ON ( without the fiber cable attached ) and access the router GUI by going to your browser and type to the address bar the default I.P address of your router which is 192.168.1.1 then log in.
4. Apply all settings you want to do then when you're finished.
5. Turn off your router
6. Reconnect the fiber cable to the router.
7. Turn on the Router

 

[Mharkkhim]

boss try mo kaya >>> Solution
1. Turn off your router
2. Unplug / Disconnect fiber cable from the router
3. TURN IT BACK ON ( without the fiber cable attached ) and access the router GUI by going to your browser and type to the address bar the default I.P address of your router which is 192.168.1.1 then log in.
4. Apply all settings you want to do then when you're finished.
5. Turn off your router
6. Reconnect the fiber cable to the router.
7. Turn on the Router

thanks po.. na try ko na po to and na access ko nmn router ko.. pero gs2 ko lng sana subokan itry ichange dns ng router ko baka sakaling bumilis.. lol

 

[jokerger25]

Access: You do not have permission to view the full content of this post. Log in or register now.
Change WAN IP Mode: DHCP to Static
Copyahin mo lang Previous IP, DNS , and Default Gateway
Tapos kaw na bahala sa DNS....


NOTE: nasubokan ko na to pero nawala ang internet malikas ang ilang minuto.

Pag nawala ang internet. Change mo lang WAN IP Mode back to DHCP.

Try the aforementioned instructions at your own risk.

 

[chiko28]

Access: You do not have permission to view the full content of this post. Log in or register now.
Change WAN IP Mode: DHCP to Static
Copyahin mo lang Previous IP, DNS , and Default Gateway
Tapos kaw na bahala sa DNS....


NOTE: nasubokan ko na to pero nawala ang internet malikas ang ilang minuto.

Pag nawala ang internet. Change mo lang WAN IP Mode back to DHCP.

Try the aforementioned instructions at your own risk.

ask ko lng po. bkt di ko po ma access ung url na, nsa itaas. lagi sinasibi you are not logged in, please log in. pero kapag nglogin ako lagi ako napupunta sa default 192.168.1.1. or 403 forbidden your client does not have permission to get URL from this server. kpag nauna ako maglogin bago enter ung posted url.

 

[jokerger25]

hahaha...sayang di mo na inabutan kasi nag update ng router firmware si pldt pati ako di ko na ma access yan... during sa time na pinost ko yan ok pa after ng update di na ako mapasok...antay2 nalang tayo...

 

[chiko28]

hahaha...sayang di mo na inabutan kasi nag update ng router firmware si pldt pati ako di ko na ma access yan... during sa time na pinost ko yan ok pa after ng update di na ako mapasok...antay2 nalang tayo...

prolink prs1841u pldt fibr nga pla ung model na gmit ko sna meron na update nkakainis pra kcng may cap per day. tas kpag nka vpn ako mas bmabagal since ung default dns ng router sa pldt pdn kc. d tloy maaccess opendns xd