What's new

Tutorial Huawei b593s-22 and b931 debranding

Status
Not open for further replies.
salam
UNIVERSAL DEBRANDING AND GLOBE STOCK VICE VERSA for B593s-22
THIS IS FOR EDUCATIONAL PURPOSES ONLY
Before Debranding your modem I suggest to openline/unlock it first and upload admin config file by jhosherxx

OPENLINE/UNLOCK YOUR B593 PROCEDURE HERE


LEGEND
V = Version
R = Release
B = Build
D = Debug
SP = Service Pack
C = Customization


DEBRANDING PROCEDURE
  1. Connect your modem thru lan cable to your pc
  2. Turn on your modem
  3. I open ang Multicast at sundan ang setting sa screen shot
D5iokJV.png
  1. Bago i click ang start button sa multicast i off muna ang modem. ngayon balik ka sa multicast at i click ang start button.
  2. turn on your modem antayin hanggang sa mag full bar na ang signal ng modem it means tapos na ang update.
  3. click stop button sa multicast at i closed ang application(multicast).
  4. Turn off your modem then turn on again.
  5. Go to your browser at mag log in ka sa gui ng modem. I refresh mo lang ang browser kung hindi parin natatanggal ang tattoo or globe logo
You do not have permission to view the full content of this post. Log in or register now.
UPDATES
>Stock firmware updated from Service Pack .25 to Service Pack .30


Q & A
Mababago ba ng debranding ang settings ng modem after ng procedure?HINDI
mababago after debranding such as admin password, SSID, wifi password etc.
How to get back to original globe firmware? The same procedure lang po ng debranding pero this time "universal to globe stock fw bin file" na ang gagamitin nyo. pwede rin mag update thru gui ng modem.
How to return to globe stock firmware after "RESET" in universal firmware? After reset while using universal firmware hindi po natin ma aaccess ang gui ng modem natin. Eto ang dapat nating gawin.

1. Connect your modem to your pc by using LAN cable then used static or manual ip
(if you dont know how here's the You do not have permission to view the full content of this post. Log in or register now.)


USE THE FOLLOWING IP ADDRESS
IP address 192.168.254.1
Subnet mask 255.255.255.0
Default gateway 192.168.254.254
Preferred DNS server 8.8.8.8
Alternative DNS server 8.8.4.4

2. Reboot your pc
3. Go to your browser and type 192.168.254.254 dapat ma access mo ang GUI ulit ulitin mo Lang hangang makapasok SA GUI.
4. Once nakapasok kana sa gui it means detected na ng pc ang modem mo. I open ang multicast at gayain lang ang nasa screenshot

P8CN9xs.png

5. After multicast settings sundan lang ulit ang procedure sa taas from 4-7. ( Debranding procedure)

6. Balik uli SA browser type 192.168.254.254 dapat ngayon maka access kana SA GUI. Log in as user (if Hindi maka login as user default password Ng globe I reset mo uli ang modem then mag login uli) upload ang config file para may admin access ka.
7. Tanggalin sa manual ip ang pc at i reboot.
8.. Then go to your browser type 192.168.1.1 done! Globe stock firmware kana ulit. Kung gusto mo ibalik sa universal same procedure ng mga naunang tuts sa pag update….. Good luck

B593S-931 UNLOCK AND UNIVERSAL DEBRANDING WITH GLOBE STOCK VICE VERSA



PROCEDURE

1. Used multicast pakigaya nalang po ang settings sa taas
2. To unlock your 931 modem used 931 unlock bin file
3. after mo ma unlock ang modem punta ka sa gui access your modem as user account (use this as your password
@l03e1t3) then upload admin config file ni Jhoshexx. para may admin access ka na before mag debrand.
4. Last step upload mo na ang 931 debrand firmware. Boom debranded na ang 931 modem mo with original 931 firmware check sa product information.
5. If you
HIT RESET botton while in universal firmware ibalik nyo lang po sa globe stock firmware I follow nyo lang po ang TUT'ssa itaas Static Ip Address and multicast procedure

UPDATES
>Pwede na ibalik sa globe stock firmware from debrand firmware 10/24/14
>931 stock firmware with service pack 05 compatible (V200R001B270D15SP05C158)10/11/14
>This time your b593s-931 modem will debranded with original universal Firmware 09/25/14

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.



Sa lahat naman ng 931 user na naka universal s22 modified firmware paki check kung ang gamit ninyong firmware ay ganito (V200R001B236D30SP00C00) pwede kayong mag update using 931 original universal firmware

B593s-22 FINLAND USER ETO NA ANG FIRMWARE PARA MAKABALIK SA GLOBE STOCK FIRMWARE your finland firmware version should be (V200R001B180D20SP05C260)

You do not have permission to view the full content of this post. Log in or register now.

say THANKS is enough for me. To all newbies paturo nalang po kayo sa mga PRO na marunong sa multicast Good Luck and Godbless Us...

You do not have permission to view the full content of this post. Log in or register now.

I'M NOT RESPONSIBLE WHAT EVER HAPPENED TO YOUR MODEM.USED THIS AT YOUR OWN RISK


S22 GLOBE STOCK FIRMWARE SERVICE PACK 30 You do not have permission to view the full content of this post. Log in or register now.
Post your experience just click "comment" thanks

You do not have permission to view the full content of this post. Log in or register now.

salamat po sa pag-share....
 

Attachments

ano ba kailangan mo ba bka matulungan kita hehe
bro eto gamitin mo hindi compatible yang gamit mo hehehe hanggang 4 bars lang yan hindi na tataas yan download mo to hanap ka..B710C0UPDATE_V200R001B236D30SP00C00
 
UNIVERSAL DEBRANDING AND GLOBE STOCK VICE VERSA for B593s-22
THIS IS FOR EDUCATIONAL PURPOSES ONLY
Before Debranding your modem I suggest to openline/unlock it first and upload admin config file by jhosherxx

OPENLINE/UNLOCK YOUR B593 PROCEDURE HERE


LEGEND
V = Version
R = Release
B = Build
D = Debug
SP = Service Pack
C = Customization


DEBRANDING PROCEDURE
  1. Connect your modem thru lan cable to your pc
  2. Turn on your modem
  3. I open ang Multicast at sundan ang setting sa screen shot
D5iokJV.png
  1. Bago i click ang start button sa multicast i off muna ang modem. ngayon balik ka sa multicast at i click ang start button.
  2. turn on your modem antayin hanggang sa mag full bar na ang signal ng modem it means tapos na ang update.
  3. click stop button sa multicast at i closed ang application(multicast).
  4. Turn off your modem then turn on again.
  5. Go to your browser at mag log in ka sa gui ng modem. I refresh mo lang ang browser kung hindi parin natatanggal ang tattoo or globe logo
You do not have permission to view the full content of this post. Log in or register now.
UPDATES
>Stock firmware updated from Service Pack .25 to Service Pack .30


Q & A
Mababago ba ng debranding ang settings ng modem after ng procedure?HINDI
mababago after debranding such as admin password, SSID, wifi password etc.
How to get back to original globe firmware? The same procedure lang po ng debranding pero this time "universal to globe stock fw bin file" na ang gagamitin nyo. pwede rin mag update thru gui ng modem.
How to return to globe stock firmware after "RESET" in universal firmware? After reset while using universal firmware hindi po natin ma aaccess ang gui ng modem natin. Eto ang dapat nating gawin.

1. Connect your modem to your pc by using LAN cable then used static or manual ip
(if you dont know how here's the You do not have permission to view the full content of this post. Log in or register now.)


USE THE FOLLOWING IP ADDRESS
IP address 192.168.254.1
Subnet mask 255.255.255.0
Default gateway 192.168.254.254
Preferred DNS server 8.8.8.8
Alternative DNS server 8.8.4.4

2. Reboot your pc
3. Go to your browser and type 192.168.254.254 dapat ma access mo ang GUI ulit ulitin mo Lang hangang makapasok SA GUI.
4. Once nakapasok kana sa gui it means detected na ng pc ang modem mo. I open ang multicast at gayain lang ang nasa screenshot

P8CN9xs.png

5. After multicast settings sundan lang ulit ang procedure sa taas from 4-7. ( Debranding procedure)

6. Balik uli SA browser type 192.168.254.254 dapat ngayon maka access kana SA GUI. Log in as user (if Hindi maka login as user default password Ng globe I reset mo uli ang modem then mag login uli) upload ang config file para may admin access ka.
7. Tanggalin sa manual ip ang pc at i reboot.
8.. Then go to your browser type 192.168.1.1 done! Globe stock firmware kana ulit. Kung gusto mo ibalik sa universal same procedure ng mga naunang tuts sa pag update….. Good luck

B593S-931 UNLOCK AND UNIVERSAL DEBRANDING WITH GLOBE STOCK VICE VERSA



PROCEDURE

1. Used multicast pakigaya nalang po ang settings sa taas
2. To unlock your 931 modem used 931 unlock bin file
3. after mo ma unlock ang modem punta ka sa gui access your modem as user account (use this as your password
@l03e1t3) then upload admin config file ni Jhoshexx. para may admin access ka na before mag debrand.
4. Last step upload mo na ang 931 debrand firmware. Boom debranded na ang 931 modem mo with original 931 firmware check sa product information.
5. If you
HIT RESET botton while in universal firmware ibalik nyo lang po sa globe stock firmware I follow nyo lang po ang TUT'ssa itaas Static Ip Address and multicast procedure

UPDATES
>Pwede na ibalik sa globe stock firmware from debrand firmware 10/24/14
>931 stock firmware with service pack 05 compatible (V200R001B270D15SP05C158)10/11/14
>This time your b593s-931 modem will debranded with original universal Firmware 09/25/14

You do not have permission to view the full content of this post. Log in or register now.
You do not have permission to view the full content of this post. Log in or register now.



Sa lahat naman ng 931 user na naka universal s22 modified firmware paki check kung ang gamit ninyong firmware ay ganito (V200R001B236D30SP00C00) pwede kayong mag update using 931 original universal firmware

B593s-22 FINLAND USER ETO NA ANG FIRMWARE PARA MAKABALIK SA GLOBE STOCK FIRMWARE your finland firmware version should be (V200R001B180D20SP05C260)

You do not have permission to view the full content of this post. Log in or register now.

say THANKS is enough for me. To all newbies paturo nalang po kayo sa mga PRO na marunong sa multicast Good Luck and Godbless Us...

You do not have permission to view the full content of this post. Log in or register now.

I'M NOT RESPONSIBLE WHAT EVER HAPPENED TO YOUR MODEM.USED THIS AT YOUR OWN RISK


S22 GLOBE STOCK FIRMWARE SERVICE PACK 30 You do not have permission to view the full content of this post. Log in or register now.
Post your experience just click "comment" thanks

You do not have permission to view the full content of this post. Log in or register now.
may way na po ba sa 931 na nov firmware?
 

Attachments

helow guys ako si ryanpaul17 kung may mga tanong kau about sa post ko dto nalang kau magmessege dahil naban po ang original account ko because of NOKIA..
 
helow ano gamint mo version?? mahihirapan kau sa ganitong proseso may mas simple pang paraan madebrand ang modem nyo simple lang log in muna kau sa You do not have permission to view the full content of this post. Log in or register now. nyo kailangan open line na yang modem nyo

GO to: You do not have permission to view the full content of this post. Log in or register now.= LOCAL UPDATE LANG PO TAU WALANG MABABAGO JAN TESTED KO NA....

KUNG GANITO ANG ORIGINAL VERSION NYO V200R001B180D20SP30C158 PWEDE KAU MAGUPDATE NG GANITONG VERSION:V200R001B180D20SP00C00
DTO NYO IDOWNLOAD: You do not have permission to view the full content of this post. Log in or register now.


BALIK TAYO SA HOME= UPDATE NG MODEM NYO..
CHOSE FILE.. OPEN NYO UNG DINOWNLOAD NYO CLICK UPDATE...
TANDAAN WAG NYONG PAPATAYIN HANGGANG HINDI PA TAPOS ANG UPDATE... AFTER NYAN RESTART NYO MODEM NYO..

REMEMBER PO
RESTART(y)(y)(y) HINDI RESET:cry::cry::cry:
MAWAWALA NAPO UNG GLOBE 4G NETWORK JAN AT UNG TATTOO MAGIGING HUAWEI SMART DEVICE NA SYA(y)(y)(y)(y)

KUNG HINDI PA NAGBAGO WAIT NYO LANG MAGBABAGO YAN.. LOG-IN KAU SA GUI NYO TINGNAN NYO UNG VERSION KAILANGAN SP00 NA SYA
ENJOIIIII LIKE LIKE LIKE LIKE LIKE (y)(y)(y)(y)(y)
salamat sa tut nyo sir..simpliest way among the tut i read..working na working pero badtrip ako wala signal 4g dito..haha
 
Status
Not open for further replies.
Back
Top