- Joined
- May 18, 2013
- Posts
- 749
- Reaction
- 6,341
- Points
- 898
- Age
- 39
How to Protect Your Globe Wimax BM622i Model Package (2010 and 2011)
10.) Open the Wimax Defender again and wait until the icon became green.
11.) Close the BM622i Firmware Updater.
12.) Try to telnet 192.168.254.1 of open the GUI to see if the WD (Wimax Defender) is working.
13.) Repeat this each time you turn on your BM622i.
Don`t forget to say Thanks. :anyone:
REQUIREMENTS:
1.) Latest Wimax Defender
2.) BM622i Firmware Upgrader
PROCEDURE:
1.) Make sure your BM622i is running. Turn off your windows firewall and antivirus.
2.) Open your web browser and type 192.168.254.1 if the GUI shows up.
3.) Run the BM622i Firmware Upgrader (Huwag nyo pong e update!!! Hayaan nyo lang na nakabukas ito)
4.) Open command prompt and type telnet 192.168.254.1 if login shows then let's proceed to the Wimax Defender protection settings.
5.) Open the latest Wimax Defender (Yung na download mo kanina)
6.) Right click on the Wimax Defender icon on your system tray.
7.) Click Settings.
8.) Replace the setting with this:
Wimax IP Address: 192.168.254.1 or 192.168.1.1
Telnet User: Firefly
Telnet Pass: $P4mb1h1r4N4m4nT0!!
9.) Click Save and Exit the Wimax Defender.Telnet User: Firefly
Telnet Pass: $P4mb1h1r4N4m4nT0!!
10.) Open the Wimax Defender again and wait until the icon became green.
11.) Close the BM622i Firmware Updater.
12.) Try to telnet 192.168.254.1 of open the GUI to see if the WD (Wimax Defender) is working.
13.) Repeat this each time you turn on your BM622i.
Don`t forget to say Thanks. :anyone:
Attachments
-
You do not have permission to view the full content of this post. Log in or register now.
Last edited: