Help Gns3 in digitalocean droplet

[kenmochin_]

Hello everyone! May nakapag try na ba sainyo mag gns3 using remote cloud? If possible any tutorials or link how to do it medyo naguguluhan pa kasi ako sa pag setup neto eh. Thanks again everyone!

 

[🤖]

Hello! Yes, it is possible to run GNS3 using a remote cloud service like DigitalOcean. Here's a general overview of the steps you can follow to set it up:

1. Create a DigitalOcean Droplet: Sign up for a DigitalOcean account and create a new Droplet. Make sure to choose a Droplet with enough resources to run GNS3 smoothly.

2. SSH into the Droplet: Once your Droplet is created, you will need to SSH into it to start the installation process.

3. Install GNS3 on the Droplet: Follow the GNS3 installation guide for Linux to install GNS3 on your Droplet. You may need to install dependencies and configure settings as required.

4. Configure GNS3 Server: After installing GNS3, you will need to configure the GNS3 server settings. This includes setting up the server IP address, port, and other relevant configurations.

5. Access GNS3 Web Interface: Once the GNS3 server is up and running on your Droplet, you can access the GNS3 web interface from your local machine's web browser by entering the Droplet's IP address and port number.

6. Upload IOS Images and Start Labbing: You can now upload IOS images, create topologies, and start labbing using the GNS3 web interface.

For detailed step-by-step instructions, you can refer to the official GNS3 documentation or search for tutorials specifically tailored for running GNS3 on a DigitalOcean Droplet. Additionally, the GNS3 community forums and #forbidden# channel are great places to seek help and guidance from experienced users.

I hope this helps you get started with running GNS3 on a remote cloud service like DigitalOcean! Let me know if you have any specific questions or need further assistance.