Ayaw lods eh, hindi nag reresponse sa keyboard input. Nag reresponse ba sa inyu?What we recommend is booting the initramfs first before flashing since the firmware doesnt give you a root shell by default on serial.
Installation and TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.
Yes. This wasn't part of the initial port. It needs some daemon to update the leds based on the data from the modem. It's something we have to work on later on.I manage got root console access on stock globe firmware , then tried flash the openwrt s12pro sysupgrade.bin using mtd write, yeah got to work and running now the vanilla openwrt but some led indicator not working except the wifi and power after enable it, I tried to configure the other led but nothing to to work only a steady led light with nothing function at all like how's the LTE signal I got... and now back to stock again ^^
Yes. Aside from configuring the modem, we have it all on default.di pala enabled yung wifi by default pero working.
Can i do software update?Yes. This wasn't part of the initial port. It needs some daemon to update the leds based on the data from the modem. It's something we have to work on later on.
Yes. Aside from configuring the modem, we have it all on default.
If you meant sysupgrade, yes. You can also install normal software from openwrt repos aside from kernel modules.Can i do software update?
Yes, i mean software upgrade. ThanksIf you meant sysupgrade, yes. You can also install normal software from openwrt repos aside from kernel modules.
abangers din here. heheMay tutorial video na po ba? hehe
I meantYes, i mean software upgrade. Thanks
sysupgrade
from a root shell. The command. We aren't sure on newer S12 pros though. They could just set the bootdelay to 0. Although that's fixable with some more hardware häçking.