Device Model: AN5506-04-FA
Firmware: RP2631
How to get PLDT full admin access:
STEP 1 Go to your browser and type: http://192.168.1.1/fh
STEP 2 login with this credentials to enable telnet:
Username: f~i!b@e#r$h%o^m*esuperadmin
Password: s(f)u_h+g|u
STEP 3 Select Debug Switch
STEP 4 enable Telnet Switch and Web Admin Switch, and click Apply.
STEP 4B You should enable Telnet in Windows.
Here's a tutorial video on how to do it: https://www.YøùTùbé.com/watch?v=6Z1hG...
STEP 5 Open Command Prompt (Windows),
or Open Terminal (Mac),
or Use Putty
STEP 6 (type the command below)
telnet 192.168.1.1
STEP 7 login with this credentials on Command Prompt/Terminal/Putty:
Login: gepon
Password: gepon
STEP 8
Then type: enable
a password prompt will show up and use this credential:
Password: gepon
STEP 9 after logging in type: cd web
STEP 10 then type: get web admin username adminpldt
(then it show you the password for the adminpldt, copy it or remember it!)
STEP 11 go to your browser and type https://192.168.1.1/fh
(NOTICE: NOT ONLY "192.168.1.1/fh"!! Always put "https://" also not "http://"(but it will redirect you to https but it still different.))
STEP 12 then login your adminpldt and the password displayed in the telnet/CL
Firmware: RP2631
How to get PLDT full admin access:
STEP 1 Go to your browser and type: http://192.168.1.1/fh
STEP 2 login with this credentials to enable telnet:
Username: f~i!b@e#r$h%o^m*esuperadmin
Password: s(f)u_h+g|u
STEP 3 Select Debug Switch
STEP 4 enable Telnet Switch and Web Admin Switch, and click Apply.
STEP 4B You should enable Telnet in Windows.
Here's a tutorial video on how to do it: https://www.YøùTùbé.com/watch?v=6Z1hG...
STEP 5 Open Command Prompt (Windows),
or Open Terminal (Mac),
or Use Putty
STEP 6 (type the command below)
telnet 192.168.1.1
STEP 7 login with this credentials on Command Prompt/Terminal/Putty:
Login: gepon
Password: gepon
STEP 8
Then type: enable
a password prompt will show up and use this credential:
Password: gepon
STEP 9 after logging in type: cd web
STEP 10 then type: get web admin username adminpldt
(then it show you the password for the adminpldt, copy it or remember it!)
STEP 11 go to your browser and type https://192.168.1.1/fh
(NOTICE: NOT ONLY "192.168.1.1/fh"!! Always put "https://" also not "http://"(but it will redirect you to https but it still different.))
STEP 12 then login your adminpldt and the password displayed in the telnet/CL