gepongepon
Journeyman
Thank you! Gumana na cya may tips po ba kayo para hindi nila muling iupdate yung settings? Thank you again intelligent masters!
Pag ka apply ko po nung mga option jan, pagka reload ng browser, nabalik po sa pagging disabled sya,Boss, tatlong apply button po ang nandiyan. Make sure na pag na-enable mo na click mo ang tamang apply. If i-enable mo ang Web admin switch click apply yung sa ilalim ng enable ganon din sa telnet switch.
Apply nyo po 1 by 1Pag ka apply ko po nung mga option jan, pagka reload ng browser, nabalik po sa pagging disabled sya,
Ganon paren po sir.Apply nyo po 1 by 1
Kung Fibr ONU po modem nyo, try nyo po muna ireset gamit yung maliit na butas sa likod then tska nyo ireconfigurr. If Huawei naman po modem nyo, di po pwede ireset kasi kaylangan ireconfigure ng trch ang mga huawei modemGanon paren po sir.
Sir, I already enabled all lan ports via admin access ang prob ko is no internet connection pa din ung ports 2-4 ko? Pano kaya workaround dito sir?
Kapag ganun po tawag nyo sa 171 tapos request po kayo paenable yung lan ports,,mga sir up ko lang question ko
Kapag ganun po tawag nyo sa 171 tapos request po kayo paenable yung lan ports,,
Wala po kasi dynamic ip ang lan 2-4 kapag tayo nagenable
Kung nung wala pa po update ng RP2631 or later version si PLDT at naaccess nyo na po si adminpldt or si admin before, kung ano po yung pinalit nyo na password yun pa din po ang current password nya at hindi yung default password na nasa itaasgot it enabled. I had the same problem na d gumagana all passwords for RP2684,
I did this:
enabled telnet and web admin switch on debug, then went to cmd as admin and enabled user account on telnet. and logged in using adminpldt z6dUABtl270qRxt7a2uGTiw
it seems like the reason I was unable to log in was that the adminpldt account was disabled on telnet after a reboot
Sir, nagtry ako gepon as username and pw kaso di nagwork. any other trick for this? Thanks in advancesuccessfully logged onto telnet using gepon as username and password
and then username: enable and password: gepon as password for 2nd login
however "get web admin username adminpldt" returns unknown command kaya di ko pa rin maka-access adminpldt
ok na sana hanggang cd web.. tas hindi rin pala pwede =__=
View attachment 789631