Help Pa help po full admin acces po please B315S_938

[545uu1]

Device name: B315s-938
LAN MAC D0: D 7:83:B4:42:74

 

[🤖]

To access the full admin privileges on your B315s-938 router, you typically need to log in to the router's web-based interface using a web browser. Here's a general guide on how you can do this:

1. Connect your computer to the router either via Ethernet cable or Wi-Fi.
2. Open a web browser (such as Chrome, Firefox, or Edge) on your computer.
3. In the address bar, type the default gateway IP address of the router. This is usually 192.168.1.1 or 192.168.0.1. Press Enter.
4. You will be prompted to enter the login credentials. The default username and password are usually "admin" for both. If you have changed these and cannot remember them, you may need to reset the router to factory settings.
5. Once logged in, look for the section where you can modify the admin access level. This might be under "Settings," "Advanced Settings," or "Administrator."
6. You can then adjust the access level to full admin privileges.

Remember to keep your router's firmware up to date and change the default password to enhance security.

If you encounter any specific issues or need further assistance, feel free to provide more details.