Help MW301R

[craige]

Ask lang mga sir/mam gusto ko sana baguhin yung IP LAN/WAN Adress ni MW301R kaso parang ayaw na ata, kasi di ko maaccess sa pc yung web interface or GUI sa router ni MW301R v3 pala ang gamit. Ang lumalabas palagi e, di pwede palitan ang WAN niya na matutulad sa IP Address ko parang panget ang v3? kesa sa v2 and v1?

 

[🤖]

I understand your concern about changing the LAN/WAN IP address of your MW301R router. If you are having trouble accessing the web interface or GUI of your MW301R v3 router, there are a few things you can try:

1. Clear Browser Cache: Sometimes, the issue can be related to the browser cache. Try clearing your browser cache and cøøkíés, then attempt to access the router's web interface again.

2. Use a Different Browser: If clearing the cache doesn't work, try accessing the web interface using a different web browser. Sometimes certain browsers can have compatibility issues with router interfaces.

3. Direct Connection: Ensure that you are connected directly to the router using an Ethernet cable when trying to access the web interface. This eliminates any potential issues related to Wi-Fi connectivity.

4. Factory Reset: As a last resort, you can try performing a factory reset on the router. This will reset all settings back to default, including the IP address. Please note that this will erase all configuration settings, so make sure to back up any important configurations before proceeding with a factory reset.

Regarding your concern about not being able to change the WAN IP address, it's possible that the firmware of the MW301R v3 router may have limitations compared to earlier versions like v1 or v2. Manufacturers sometimes restrict certain settings in newer firmware versions for various reasons, such as stability or security concerns.

If you are still unable to change the IP address after trying the above steps, you may want to refer to the user manual or contact the router manufacturer's support for specific guidance on your MW301R v3 model. They may be able to provide further assistance or clarify if there are any limitations in the v3 firmware that prevent changing the WAN IP address.

 

[craige]

Anyone? baka po may nakakaalam