Tutorial How to Configure CISCO Manage Switch

[ryga_14]

Baka may alam kayo dyan pano mag configure ng manage switch?

 

[ryga_14]

networking fucos nmu ana Ga ?

All around bert. hahaha apil procurement

 

[AlbertoVisario]

All around bert. hahaha apil procurement

nya ikaw ra isa Ga ?

 

[fatbug]

Anong model boss tsaka anong config gusto mo gawin?

 

[ryga_14]

Anong model boss tsaka anong config gusto mo gawin?

sf300-24 assign port lang po.

 

[fatbug]

assign port po ba sa Vlan o IP Interface?

 

[ryga_14]

assign port po ba sa Vlan o IP Interface?

sa port vlan

 

[fatbug]

Connect ka sa terminal (serial cable o telnet) boss tpos try mo below

Configure terminal (enter)

Interface (port na gusto mo config. Ex port f0/01 or f0/1 tpos enter ulit)

Switchport access vlan (vlan ID no gusto assign sa port tpos enter ulit)

Do show run interface f0/xx (check mo ung port config kung na apply ung vlan)

Do wr (para ma write sa flash ung config)

 

[buwitre]

Salamat po

 

[ryga_14]

Connect ka sa terminal (serial cable o telnet) boss tpos try mo below

Configure terminal (enter)

Interface (port na gusto mo config. Ex port f0/01 or f0/1 tpos enter ulit)

Switchport access vlan (vlan ID no gusto assign sa port tpos enter ulit)

Do show run interface f0/xx (check mo ung port config kung na apply ung vlan)

Do wr (para ma write sa flash ung config)

thank you po. Also matanong lang, nakaasign naba yung manage switch ng ip kahit dina econfigure? or kailangan pa talaga econfigure?

 

[fatbug]

Kung naka default/factory reset ung switch alam ko by default ang IP is 192.168.1.254.

Check mo kung may nka configure na ibang IP.

Sa terminal type mo "show IP interface Brief"

Mkikita mo dyan kung may ibang IP na nka configure

 

[PHC-HiddenWizard]

thank you po. Also matanong lang, nakaasign naba yung manage switch ng ip kahit dina econfigure? or kailangan pa talaga econfigure?

Resolved naba ito? kung hindi pa, subukan mo mag simulation gamit yung Cisco Packet Tracer.