What's new

Closed Help naman about bootable usb

Status
Not open for further replies.

xJay

Eternal Poster
Established
Mga sir tanong ko lang sana kung papano mag format using bootable usb saka penge po link ng win7 ultimate na gumagana kapag inilagay sa bootable usb sana with license napo salamat.
 
-download ka ng Rufus, at Windows 7 ISO, at ac†ïvâ†ør.
-at least 4GB USB drive
-boot the target machine on the prepared USB drive
-activate using the ac†ïvâ†ør
 
Saka sir pede po palapag nadin ng mga links na gamit mo para sure na gumagana kasi tested nyu na baka iba kasi ma DL ko salamat po.
 
Reformat-computer.jpg

The process of reformatting computer using USB Flash Drive is explained here in step by step guide.

Steps to reformat computer using USB flash drive
Step 1
Install USB Disk Storage Format Tool on your computer. Next, create a USB flash drive that has a boot sector. Insert the blank USB flash drive and run HP USB Disk Storage Format Tool.




Step 2
On the format tool platform in the Device tab section, select the flash drive that you want to create as bootable. Make sure that it is the right device.This makes it easy to reformat computer using USB flash drive.

Change your USB storage disk into a bootable USB disk. To do so, you have to empty your flash drive. You will also need You do not have permission to view the full content of this post. Log in or register now. and You do not have permission to view the full content of this post. Log in or register now..



Step 3
To reformat computer using USB flash drive, download You do not have permission to view the full content of this post. Log in or register now. OR this link. It is totally free for download.

After downloading, extract the zipped file into a folder that you can easily explore.



Step 4
You do not have permission to view the full content of this post. Log in or register now.Tool. This software is absolutely free for download.



Step 5
Go to File System tab, change settings into FAT 32.

Under Format Options, check the Create a DOS startup disk option. Next, click “…” button to browse the folder where you have extracted Windows 98 MS-DOS files earlier. Select the folder and click OK.



Step 6
On the format tool, click the START button. A pop-up message will prompt you before proceeding that data on the drive will be lost. Agree to continue. Instantly, your bootable USB flash drive will be ready. You can now reformat computer using USB flash drive. Reformat computer without a disc.

step-6-www.Y⊕ùTùbé.com-.jpg
www.YøùTùbé.com



Step 7
Start reformatting your netbook, laptop or desktop computer using your bootable USB drive.Before turning the computer on, plug in your bootable USB first and then turn on your computer.



Step 8
As the screen display starts, press either Del or F2 or F10 to display BIOS setup. Go to Boot menu to change Boot order. Make USB flash drive to be on the first boot order.



Step 9
Press F10 on the keyboard to save changes.
As the computer restarts, click enter when asked to boot from USB flash drive or wait until the flash drive loads automatically.



Step 10
If you have made a Windows 7 installer on your bootable flash drive, the installation will automatically start. The installation will take several minutes. Wait until the installation is completed. And that’s it.
 

Attachments

Reformat-computer.jpg

The process of reformatting computer using USB Flash Drive is explained here in step by step guide.

Steps to reformat computer using USB flash drive
Step 1

Install USB Disk Storage Format Tool on your computer. Next, create a USB flash drive that has a boot sector. Insert the blank USB flash drive and run HP USB Disk Storage Format Tool.




Step 2
On the format tool platform in the Device tab section, select the flash drive that you want to create as bootable. Make sure that it is the right device.This makes it easy to reformat computer using USB flash drive.

Change your USB storage disk into a bootable USB disk. To do so, you have to empty your flash drive. You will also need You do not have permission to view the full content of this post. Log in or register now. and You do not have permission to view the full content of this post. Log in or register now..



Step 3
To reformat computer using USB flash drive, download You do not have permission to view the full content of this post. Log in or register now. OR this link. It is totally free for download.

After downloading, extract the zipped file into a folder that you can easily explore.



Step 4
You do not have permission to view the full content of this post. Log in or register now.Tool. This software is absolutely free for download.



Step 5
Go to File System tab, change settings into FAT 32.

Under Format Options, check the Create a DOS startup disk option. Next, click “…” button to browse the folder where you have extracted Windows 98 MS-DOS files earlier. Select the folder and click OK.



Step 6
On the format tool, click the START button. A pop-up message will prompt you before proceeding that data on the drive will be lost. Agree to continue. Instantly, your bootable USB flash drive will be ready. You can now reformat computer using USB flash drive. Reformat computer without a disc.

step-6-www.yôutubê.com-.jpg

You do not have permission to view the full content of this post. Log in or register now.



Step 7
Start reformatting your netbook, laptop or desktop computer using your bootable USB drive.Before turning the computer on, plug in your bootable USB first and then turn on your computer.



Step 8
As the screen display starts, press either Del or F2 or F10 to display BIOS setup. Go to Boot menu to change Boot order. Make USB flash drive to be on the first boot order.



Step 9
Press F10 on the keyboard to save changes.
As the computer restarts, click enter when asked to boot from USB flash drive or wait until the flash drive loads automatically.



Step 10
If you have made a Windows 7 installer on your bootable flash drive, the installation will automatically start. The installation will take several minutes. Wait until the installation is completed. And that’s it.
salamat po dito may idea po akong nakuha salamat.
 

Attachments

Reformat-computer.jpg

The process of reformatting computer using USB Flash Drive is explained here in step by step guide.

Steps to reformat computer using USB flash drive
Step 1

Install USB Disk Storage Format Tool on your computer. Next, create a USB flash drive that has a boot sector. Insert the blank USB flash drive and run HP USB Disk Storage Format Tool.




Step 2
On the format tool platform in the Device tab section, select the flash drive that you want to create as bootable. Make sure that it is the right device.This makes it easy to reformat computer using USB flash drive.

Change your USB storage disk into a bootable USB disk. To do so, you have to empty your flash drive. You will also need You do not have permission to view the full content of this post. Log in or register now. and You do not have permission to view the full content of this post. Log in or register now..



Step 3
To reformat computer using USB flash drive, download You do not have permission to view the full content of this post. Log in or register now. OR this link. It is totally free for download.

After downloading, extract the zipped file into a folder that you can easily explore.



Step 4
You do not have permission to view the full content of this post. Log in or register now.Tool. This software is absolutely free for download.



Step 5
Go to File System tab, change settings into FAT 32.

Under Format Options, check the Create a DOS startup disk option. Next, click “…” button to browse the folder where you have extracted Windows 98 MS-DOS files earlier. Select the folder and click OK.



Step 6
On the format tool, click the START button. A pop-up message will prompt you before proceeding that data on the drive will be lost. Agree to continue. Instantly, your bootable USB flash drive will be ready. You can now reformat computer using USB flash drive. Reformat computer without a disc.

step-6-www.yôutubê.com-.jpg

You do not have permission to view the full content of this post. Log in or register now.



Step 7
Start reformatting your netbook, laptop or desktop computer using your bootable USB drive.Before turning the computer on, plug in your bootable USB first and then turn on your computer.



Step 8
As the screen display starts, press either Del or F2 or F10 to display BIOS setup. Go to Boot menu to change Boot order. Make USB flash drive to be on the first boot order.



Step 9
Press F10 on the keyboard to save changes.
As the computer restarts, click enter when asked to boot from USB flash drive or wait until the flash drive loads automatically.



Step 10
If you have made a Windows 7 installer on your bootable flash drive, the installation will automatically start. The installation will take several minutes. Wait until the installation is completed. And that’s it.


panahon pa to ni kopong kopong e hahaha
 

Attachments

bootable usb boss need ko may usb nako dito yung guide nalang need ko saka link ng working na OS na pede ma DL

Link: You do not have permission to view the full content of this post. Log in or register now.
Link: You do not have permission to view the full content of this post. Log in or register now.

1. Download mo muna ung os jan sir, naka ISO na yan.
- Gamit ka Internet Download Manager (IDM) para mabilis madownload.
2. Download ka rufus.
3. Pagtapos na ung download saksak mo na ung usb mo, open mo ung rufus click mo ung SELECT tas locate mo ung dinownload mo na OS then start, wait mo matapos.

- ok na nakagawa kana bootable usb tapos restart mo pc mo, then during the initial startup screen, press ESC, F1, F2, F8 or F10. (Depende to sa version ng BIOS mo)
 
Link: You do not have permission to view the full content of this post. Log in or register now.
Link: You do not have permission to view the full content of this post. Log in or register now.

1. Download mo muna ung os jan sir, naka ISO na yan.
- Gamit ka Internet Download Manager (IDM) para mabilis madownload.
2. Download ka rufus.
3. Pagtapos na ung download saksak mo na ung usb mo, open mo ung rufus click mo ung SELECT tas locate mo ung dinownload mo na OS then start, wait mo matapos.

- ok na nakagawa kana bootable usb tapos restart mo pc mo, then during the initial startup screen, press ESC, F1, F2, F8 or F10. (Depende to sa version ng BIOS mo)
Working po ba itong OS sir tested nyu napo ba ito salamat po sir ng marami.
 
Status
Not open for further replies.
Back
Top