Tools Fx pr2l & pr2 openlined firmware

[Chaos16]

salamat dito boss keep sharing

 

[alxenrqz]

Mga boss pano ggwin na openline nman kaso ayaw lumabas ng data connecting pdp lng lgi.

 

[stemets]

Ok nman tong toturial na to, kaso lng yung device kusang ng rerebot. Yung akin random mins/hr ng rerebot sya... Any solution dito?

 

[Poopy]

Ok nman tong toturial na to, kaso lng yung device kusang ng rerebot. Yung akin random mins/hr ng rerebot sya... Any solution dito?

Same here. Dati hindi naman nagrereboot sakin ng kusa pero ngayon ganun na nangyayari hahaha.

 

[stemets]

wala bang solution? pwd kaya yung pr3l na firmware sa pr2l

 

[ReyVinz1417]

salamat sa instructions at firmware ts. openline na fxpr2 ko.

Boss pwede ba sa sun pocketwifi fx pr2 yan

 

[stemets]

pwd yan boss...

 

[ReyVinz1417]

pwd yan boss...

Thanks boss

 

[stemets]

prob namin sa pr2l yung auto rebot.

 

[Jhai09]

Any solution sa ganitong signal indicator? red sya palagi na nag biblink pero mka net naman,inopenline ko kagabi pero hspa+ lg yung globe.

 

[Jhai09]

Ok naman sa net kaso yung indicator lg laging red at hspa+ lg po ba talaga to sa globe?

 

[strives820]

Ano po posibleng dahilan nito? Bootloop kasi Evoluzn FX-PR2L ko. Kapag umabot na sa screen nung, bigla siya nagrereset sa welcome. I tried doing this tutotial of flashing pero ganyan naman lumalabas sa flasher. Paano kaya yan? may naka encounter na ba?

 

[gel_nalda]

Openlined to Globe & Smart LTE. Kahit Thank you at Feedback lng ok na masaya nko!

Intruction:

1. Download the tools and driver and your specified firmware (FX PR2 or FX PR2L).
2. Extract the downloaded archives for later use.
3. List down the IMEI, MAC and S/N which is written on the back of your device for later use.
4. Run the SWDownloader.exe from the extracted firmware folder.
5. Select the .blf file from the SWD folder in the extracted firmware folder.
6. Make sure the erase all flash is ticked.
7. Click the green bulb icon and connect your device using USB Cable with the battery removed.
8. Wait until the flashing is done and disconnect it from the USB cable.
9. Reboot your device and Connect.
10. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
11. Insert Globe SimCard.
12. Go to MEP Settings and Enter 123456

For First Time Flasher you need to download this first to your computer.
You do not have permission to view the full content of this post. Log in or register now.
Credit This Driver to sir Argotron.

SUCCESS !

FX PR2L Openlined Firmware by JamesAbutin - You do not have permission to view the full content of this post. Log in or register now.
FX PR2 Openlined Firmware by James Abutin - You do not have permission to view the full content of this post. Log in or register now.

maraming salamat dito idol. sobrang laking tulong.

 

[havoc119]

San ilalagay yung mga imei ska mac

 

[gerivera2019]

THANK YOU PO SIR.. YOUR SO HELPFUL.. NA UNLOCK KO PO YUNG POCKET WIFI KO...meron din po ba kayo pang unlock ng EVOLUZN FX PR3X SMART LTE. thanks po

 

[konevoluzn]

Sir James Abutin, S Smart Evoluzn fx pr2 ko using your firmware, walang signal. pero pag ibang firmware na may default password na di naman na indicatr nung nag upload at gumawa nung ibang TUT, nagkaka signal. pero di ko mapasok ung WIFI.

 

[stemets]

sinu meron stock firmware ng pr2l?

 

[Sheilo_marvin]

Salamat po dito sa tutorial na openline ko na pocket wifi ko sobrang laking tulong neto

 

[Dharbz24]

Sa fx pr2 po, kailangan pa bang iapply yung IMEI at Mac ID? or diretso nalang sa mep setting? thank you po. feedback ako if matry ko na.

 

[Drei69X]

Sa fx pr2 po, kailangan pa bang iapply yung IMEI at Mac ID? or diretso nalang sa mep setting? thank you po. feedback ako if matry ko na.

hnd na po kailangan.basta tamang firmware po gagamitin.sa iba po kasi nawawala yung imei after flash.kung meron naman ok na yan wag mo na edit.