Closed FULL ADMIN 936 DE BRAND

[Rexzero]

Haha. Akala ko ehh pocket wifi lang. Try ko din ibang LTE Kickstart SIM. Baka SIM lang ang problema!! Thanks paps

haha no problem
boss gumawa nga din ako ng own version sa tut binago ko lang ng kunti para sa mga super duper newbie talaga sa 936.

 

[ickie1593]

haha no problem
boss gumawa nga din ako ng own version sa tut binago ko lang ng kunti para sa mga super duper newbie talaga sa 936.

Tut regarding saan??

 

[Rexzero]

Tut regarding saan??

936 boss openline at debranding

 

[ickie1593]

936 boss openline at debranding

Openline na nga at debranded na din yung 936 ko e?

 

[Rexzero]

Openline na nga at debranded na din yung 936 ko e?

hindi naman ikaw ang tinutukoy ko boss,, please read carefully

 

[Joefil]

Unlocking Instructions:
Step 1: Enter USB Mode (Steady Green Color)

a. Connect LAN cable from the LAN port of your modem to your PC and turn it on.

b. Run Multicast Upgrade Tool as administrator.

c. Make sure that your LAN card is properly chosen under “Network Card” option.

d. Under “File Path” option click “Open” and browse for the 931.bin file. Do not click “Start” at this point.

e. Unplug your modem.

f. Click “Start” in your Multicast Upgrade Tool.

g. Plug your modem and wait until the signal mode indicator displays a steady red color.

h. Press and hold “WPS” and “Power” buttons on your modem simultaneously until the signal mode indicator’s red color turns off twice, wait about 10 seconds then release the buttons.

i. Wait until the Mode indicator turns green and close Multicast Upgrade Tool.

j. Install Mobile Partner on your PC to provide the necessary USB drivers for your modem. If your operating system is windows 8 or above, install the “Huawei Drivers” provided.

k. Connect your modem to your PC via USB cable.

l. Take note of the COM port (Huawei UI interface) under LPT/COM ports in device manager.

Step 2: Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. To check if you have chosen the right COM Port, click on “Read Imei”. The “Logs” window should display the modem’s IMEI number otherwise select a different COM Port. Do not edit the codes unless you know what you are doing. You might brick your modem by doing so.

First code:

at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0 ===>Unlocks the modem permanently.


Second code:

AT ^ SYSCFGEX = "0203", 3FFFFFFF, 1, 2, 800C5 ,, ===>Register to for 3G network first. If 3G is not available then LTE. Will not register if only 2G is available . All frequency bands are selected.

Third Code:

AT+CGDCONT=1,"IP","internet.globe.com.ph" ===> Set the APN to “internet.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Postpaid/LTE)

OR

AT+CGDCONT=1,"IP","http.globe.com.ph” ===> Set the APN to “http.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Prepaid/LTE)

OR

AT+CGDCONT=1,"IP","internet” ===> Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).


Fourth Code:
AT^reset ===> Reboots the modem.


3. Exit CID Reader
Congrats. Your modem is now unlocked.


How to Obtain Admin Access:

Enter USB mode by following Step 1 of “Unlocking Instructions”.
Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. To check if you have chosen the right COM Port, click on “Read Imei”. The “Logs” window should display the modem’s IMEI number otherwise select a different COM Port. Do not edit the codes unless you know what you are doing. You might brick your modem by doing so.


Enter the following commands:
First Code:
at^datalock? ===> Query Datalock Status Value. Default value is “1” (Enabled)

Second Code:
AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ===> Sets The Datalock Value to 12345678

Third Code:
at^datalock="12345678" ===> Sets Datalock Status value to “0” (Disabled)

Fourth Code:
at^sfm=1 ===> This will set your modem to factory mode

Fifth Code:
AT^reset ===> This will reset your modem. Wait until the modem reboots and shows a
steady power light indicator.



Connect your modem to your PC via USB Cable
Under “Network Properties”, Set IP manually as follows:
Tick “Use the Following IP Address”
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1

Tick “Use the following DNS Server Adressess”
Preferred DNS: 192.168.1.1
Alternate DNS: (leave blank)

Click OK

Run “Config Updater” and wait for it to complete successfully.
Exit “Config Updater” and reboot modem.
Enter USB mode.
Run CID reader in USB mode and enter the following commands:
Code 1:
at^sfm=0 ===> This command will kick your modem out of factory mode
Code 2:
AT^reset ===> Resets and reboots the modem
After successfully rebooting, go to Network Properties again and Tick “Obtain IP Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the modem’s web interface by typing 192.168.254.254 in your browser.

Enter the Following Information in the boxes provided.
Username: admin
Password: admin

Go to “Settings”.

Choose “Restore Default”
The modem will reboot.
Done. You now have admin access to your modem


yan inulit ko lang lahat

thanks sa nagshare nito

eto pala ginamit ko file bin
You do not have permission to view the full content of this post. Log in or register now.

alam ko blue mode muna tsaka mag gre green

San po ba gagamitin ang BS315s-936 globe to huawei debrand bin? Wla nmn po kasi sa steps para sa pagfull admin access sa 936.

 

[shrek02]

sir patulong naka debrand na ko ng zain fw, using yan method nyo, gusto ko mag palit ng polkomtel been trying to go to usb mode di ko mapasok tried the 2 method both nag red mode sya....help

 

[ickie1593]

sir patulong naka debrand na ko ng zain fw, using yan method nyo, gusto ko mag palit ng polkomtel been trying to go to usb mode di ko mapasok tried the 2 method both nag red mode sya....help

Natry mo ba magUSB Mode gamit yung Multicast tool then insert yung 931.bin??

 

[shrek02]

Natry mo ba magUSB Mode gamit yung Multicast tool then insert yung 931.bin??

yes sir na try ko na yan ayaw nag red mode talaga sya ayaw matanggal un zain firmware

 

[ickie1593]

yes sir na try ko na yan ayaw nag red mode talaga sya ayaw matanggal un zain firmware

Nung nag red ba ay pinindot mo yung Power+WPS

 

[shrek02]

Nung nag red ba ay pinindot mo yung Power+WPS

yes sa multicast nag upload ng ng other firmware then mag red un modem, then stop ko na un multicast. tapos press and hold un power+wps. mag off un lights tapos mag on then ilaw ulit un red light then wait ko mamatay un red light then release power+wps. then wait ako kaso red light pa rin hindi sya nag green.

i've done it few times before mag usb mode kaso zain firmware upload ko. ngayon gusto ko lang mag polkomtel kaso ayaw na nya mag usb mode.

 

[Rexzero]

yes sa multicast nag upload ng ng other firmware then mag red un modem, then stop ko na un multicast. tapos press and hold un power+wps. mag off un lights tapos mag on then ilaw ulit un red light then wait ko mamatay un red light then release power+wps. then wait ako kaso red light pa rin hindi sya nag green.

i've done it few times before mag usb mode kaso zain firmware upload ko. ngayon gusto ko lang mag polkomtel kaso ayaw na nya mag usb mode.

boss need mo mag use ng putty at e5186 tool

 

[shrek02]

boss need mo mag use ng putty at e5186 tool

sir ano pong tuts yan. thanks

pa link naman po ano need kong tuts. salamat

 

[ickie1593]

sir ano pong tuts yan. thanks

pa link naman po ano need kong tuts. salamat

Ito sinasabi re Rexzero https://phcorner.net/t/b315s-936-do...firmware-version-no-need-mag-usb-mode.139582/

 

[shrek02]

ok na salamat sir Rexzero for giving the tip, nakita ko na downgrading pala na tuts un.

salamat ulit.

salamat rin sir ickie1593 sa mga replies nyo

 

[ickie1593]

ok na salamat sir Rexzero for giving the tip, nakita ko na downgrading pala na tuts un.

salamat ulit.

salamat rin sir ickie1593 sa mga replies nyo

No problem with that. Hope we help you regarding to your concern.

 

[Rexzero]

ok na salamat sir Rexzero for giving the tip, nakita ko na downgrading pala na tuts un.

salamat ulit.

salamat rin sir ickie1593 sa mga replies nyo

no problem boss enjoy lang

 

[jajai555]

Pa help po. Error ako sa pang 3 na code ng full admin. Ulit po ba ako from the start? Kahit anong sim redlight ehh tapos ndi na nagkakasignal...

 

[Ronanbricx]

Pa help po, full admin access na po modem ko kaya lang nawala po connection nya sa LAN, palagi na lang Identifying Network. Kahit anong gawin ko di pa rin bumabalik. I tried reinstalling my Windows OS pero ganun pa rin walang nangyari.. IP started at 169..

Sana may makatulong.. Thanks..

 

[ickie1593]

Pa help po, full admin access na po modem ko kaya lang nawala po connection nya sa LAN, palagi na lang Identifying Network. Kahit anong gawin ko di pa rin bumabalik. I tried reinstalling my Windows OS pero ganun pa rin walang nangyari.. IP started at 169..

Sana may makatulong.. Thanks..

Ikaw ba nagfull admin nyan??

Pa help po. Error ako sa pang 3 na code ng full admin. Ulit po ba ako from the start? Kahit anong sim redlight ehh tapos ndi na nagkakasignal...

Resume lang. Ganun din nangyari sakin. Error din pero dumiretso lang ako.