Jmrie_
in memoriam 1995-2021
- Joined
- Aug 21, 2017
- Posts
- 104,956
- Solutions
- 1
- Reaction
- 53,216
- Points
- 27,061
- Age
- 28
©legend221 from Xda
eto po iyong info about sa signal natin iyong 4g/3g/2g/edge if merong edge paki correct nalang if may nag post na kagaya neto irepost ko lang for newbie po
so eto na..
pls read..
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
eto po iyong info about sa signal natin iyong 4g/3g/2g/edge if merong edge paki correct nalang if may nag post na kagaya neto irepost ko lang for newbie po
so eto na..
pls read..
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).