Tutorial Cherry mobile stock rom list

[PHC - JabonilloXD]

Boss na bootloop yung CM j1 ko..may stock rom ba kayo at tutorial kung panu mag flash..non removable kasi yung battery..wala ako mahanap na tut para dun..sa pc ko po gagawin..salamat po

anong version niyan v4/v3/v2

 

[mystogun101]

anong version niyan v4/v3/v2

V3 po boss..pahinge din po tut

 

[PHC - JabonilloXD]

You do not have permission to view the full content of this post. Log in or register now.


Flashing Stock Rom To Android Smartphone
Install Spreadtrum Driver

1. First download You do not have permission to view the full content of this post. Log in or register now. the complete driver for Spreadtrum.
2. After download, extract anywhere in your computer, then select system type if 32-bit or 64-bit.
   - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.

NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.


Flash Pac file Stock Rom

1. Download the You do not have permission to view the full content of this post. Log in or register now. latest version, or You do not have permission to view the full content of this post. Log in or register now. lower version. Then extract to your desired location.
2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
   NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open.
   
4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
   
5. Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
   
6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
   
7. After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

Good Luck

 

[mystogun101]

You do not have permission to view the full content of this post. Log in or register now.


Flashing Stock Rom To Android Smartphone
Install Spreadtrum Driver

1. First download You do not have permission to view the full content of this post. Log in or register now. the complete driver for Spreadtrum.
2. After download, extract anywhere in your computer, then select system type if 32-bit or 64-bit.
   - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.

NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.


Flash Pac file Stock Rom

1. Download the You do not have permission to view the full content of this post. Log in or register now. latest version, or You do not have permission to view the full content of this post. Log in or register now. lower version. Then extract to your desired location.
2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
   NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open.
   
4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
   
5. Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
   
6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
   
7. After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

Good Luck

Salamat sir

 

[mystogun101]

You do not have permission to view the full content of this post. Log in or register now.


Flashing Stock Rom To Android Smartphone
Install Spreadtrum Driver

1. First download You do not have permission to view the full content of this post. Log in or register now. the complete driver for Spreadtrum.
2. After download, extract anywhere in your computer, then select system type if 32-bit or 64-bit.
   - To know your system type, go to control panel click on System and Security then click System. or simply right click on Computer and click Properties. you will see like this. mine is 32 bit (also known as x86-bit).
3. After you knew your system type, open your extracted SCI-android-usb-driver-jungo-v4 folder, then choose a folder weather it is x86(32) or x64, then run DPInst.exe. Just click next until it finish installing.

NOTE: Before proceeding, make sure that your android smartphone should have atleast 30 to 50 percent of battery to perform flashing.


Flash Pac file Stock Rom

1. Download the You do not have permission to view the full content of this post. Log in or register now. latest version, or You do not have permission to view the full content of this post. Log in or register now. lower version. Then extract to your desired location.
2. Open your extracted files and run ResearchDownload.exe, For lower version open Bin folder and run UpgradeDownload.exe.
   NOTE: UpgradeDownload and ResearchDownload is the same, UpgradeDownload is just the name of the lower version but they are both SPD Upgrade tool.
3. In this instruction I will use UpgradeDownload and a Use Cherry Mobile Pac file as a sample. In UpgradeDownload window, click on single gear icon to Load Packet and browse for pac file(firmware/stock rom) you downloaded then click open.
   
4. Loading a pac file may took long depend on file size. After loading a pac file, now ready to start flashing, You can also click on Settings on two gear icon if you want to unchecked some part of firmware like EraseRuntimeNV, This will not work on lower version. I recommend that leave it unchanged if you don't have any idea.
   
5. Turn off first your phone, remove battery (if removable) then bring it back. In ResearchDownload/UpgradeDownload Click on Start Downloading, then in your phone press Volume up and Volume down then connect USB cable. If you see a a progress bar, then it means that it is successfully connected. if not, then try step 5 again.
   
6. Wait until you see a Passed in progress, that means, you installed a new stock rom successfully.
   
7. After you flash the firmware, you can now turn on your phone, take note that first time start up may took long. but if it tooks more than 15 minutes then I suggest to perform a hard reset. you can search a procedure in google.

Good Luck

Salamat sir

 

[too_eazy]

boss bka may rom ka ng cm edge boss bootlop kasi

 

[too_eazy]

boss bka may rom ka ng cm edge boss bootlop kasi

 

[PHC - JabonilloXD]

You do not have permission to view the full content of this post. Log in or register now.

 

[ricsorblade]

flare 5 boss Merun ka stock rom

 

[PHC - JabonilloXD]

flare 5 boss Merun ka stock rom

>> You do not have permission to view the full content of this post. Log in or register now. <<

 

[PHC - JabonilloXD]

flare 5 boss Merun ka stock rom

password >>
mo xxx gs msan d wich

remove the SPACES

 

[too_eazy]

boss kpag magflaflash ba kelangan may net?

 

[too_eazy]

You do not have permission to view the full content of this post. Log in or register now.

boss stock rom po need ko cm.edge na bootloop cp ko eh salamat ung pac file pp sana pra madali boss

 

[addikted04]

Boss meron ka cherry mobile hd 2.0 dyan?

 

[PHC - JabonilloXD]

Boss meron ka cherry mobile hd 2.0 dyan?

You do not have permission to view the full content of this post. Log in or register now.

 

[dashbin]

thank you po... sir pa update ng bagong mga model....

 

[PHC - JabonilloXD]

thank you po... sir pa update ng bagong mga model....

Sige po update ko ung Bago

 

[too_eazy]

Sige po update ko ung Bago

sir ung rom po na cherry mobile edge na bignay nio hindi po gagana.. may error na brom 8x0 hint. pahelp naman boss need lang talaga

 

[PHC - JabonilloXD]

sir ung rom po na cherry mobile edge na bignay nio hindi po gagana.. may error na brom 8x0 hint. pahelp naman boss need lang talaga

try ko maghanap ulit

 

[PHC - JabonilloXD]

sir ung rom po na cherry mobile edge na bignay nio hindi po gagana.. may error na brom 8x0 hint. pahelp naman boss need lang talaga

You do not have permission to view the full content of this post. Log in or register now.

try mo boss