Closed Build.prop tweaks to speedup phone

[Great Commander]

How To Use Build Prop Tweaks On Your Android Device.

download root explorer, grant root access, change to R/W and go to /System find "build.prop" and enter these codes.


1. Better RAM management
Code:
ro.HOME_APP_ADJ=1

2. Improves audio and video recording quality
Code:
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=8m
ro.media.panorama.defres=3264×1840
ro.media.panorama.frameres=1280×720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65

3. Faster streaming videos
Code:
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-record=false

4. Video acceleration and HW debugging. debug.composition.type can also be changed to cpu or mdp.
Code:
debug.sf.hw=1
debug.performance.tuning=1
video.accelerate.hw=1
debug.egl.profiler=1 # Measure rendering time in adb shell dumpsys gfxinfo
debug.egl.hw=1
debug.composition.type=gpu # Disable hardware overlays and use GPU for screen compositing

5. Disables built in error reporting.
Code:
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1

6. Better net speeds.
Code:
net.tcp.buffersize.default=4096,87380,256960, 4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,409 6,163 84,256960
net.tcp.buffersize.umts=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,8 7380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,8 7380,256960,4096,163 84,256960

7. Saves power.
Code:
ro.mot.eri.losalert.delay=1000 (could brake tethering.)
ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
ro.mot.eri.losalert.delay=1000

8. 3G tweaks.
Code:
ro.ril.hep=0
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=6

9. Disables logcat
Code:
logcat.live=disable

10. Screen recognizes only two fingers.
Code:
ro.product.multi_touch_enabled=true
ro.product.max_num_touch=2

11. Support for ipv4 and ipv6.
Code:
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1

12. Phone rings immediately.
Code:
ro.telephony.call_ring.delay=0
ring.delay=0

13. Disables blackscreen issue after a call.
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25

14. Better scrolling.
Code:
windowsmgr.max_events_per_sec=150
ro.min_pointer_dur=8 ro.max.fling_velocity=12000
ro.min.fling_velocity=8000

15. Better signal.
Code:
persist.cust.tel.eons=1

16. Better call voice quality.
Code:
ro.ril.enable.amr.wideband=1

17. Better signal.
Code:
ro.config.hw_fast_dormancy=1

18. Faster boot.
Code:
ro.config.hw_quickpoweron=true

19. Disables error checking.
Code:
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0

20. Dalvik Virtual Machine tweaks.
Code:
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy

21. Disables locating.
Also delete /system/app/networklocation.apk and /system/
Code:
framework/com.android.location.provider.jar
Code:
ro.com.google.locationfeatures=0
ro.com.google.networklocation=0

22. Disables sending of usage data.
Code:
ro.config.nocheckin=1

23. Better image quality, lower performance.
Code:
persist.sys.use_dithering=1

24. Disable notification while adb is active
Code:
persist.adb.notify=0

25. Change LCD density
Code:
ro.sf.lcd.density=xxx
Note: Replace "xxx" with numeric value.

26. MMS APN retry timer set to 2 sec( if SMS/MMS couldn`t be sent, it retries after 2 instead of 5 seconds).
Code:
ro.gsm.2nd_data_retry_config=max/_retries=3, 2000, 2000, 2000

27. Key lights stay on while screen is on.
Code:
ro.mot.buttonlight.timeout=0

28. Disable strict mode checking.
Code:
persist.android.strictmode=0

29. Remove FPS cap. May be unstable – better have it activated
Code:
debug.gr.swapinterval=0

30. build.prop tweaks for battery life
Code:
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0

31. build.prop tweaks for improved performance
Code:
debug.performance.tuning=1

 

[fR31nD]

Di po ba to nakakasira?

 

[100NyanPower]

isang mali lng ata nito gg na phone mo hahaha

 

[Great Commander]

Di naman po.Pero use at your own risk nlang.

 

[PHC Thew]

isang mali lng ata nito gg na phone mo hahaha

bootloop lang naman po

 

[Skye0814]

Hindi yan, basta wala lang mabubura na code sa loob.

 

[haLO Guys]

Ayan nabootloop tuloy cp ko isa hanggang logo na lang

 

[nercky]

Pwede ba open 4G using yan sir

 

[Ree025]

Para san yung 3g tweaks?

 

[hot papa]

thanks

 

[yexel09]

back up muna bago gawin.....

 

[Clarist]

Bootloop tuloy cp ko :-(

 

[Jin Kazama]

pwede pong humingi nang Video Tut for safety

 

[Frozen_Epica]

 

[Jin Kazama]

View attachment 231515

papano po tamang paglagay

 

[Frozen_Epica]

papano po tamang paglagay

1. Root your device and install Root Explorer (or any root file manager) then find build.prop located at root/system/build.prop
2. U can Use You do not have permission to view the full content of this post. Log in or register now. app or You do not have permission to view the full content of this post. Log in or register now. to edit your build.prop
3. Open build.prop file with Text editor and Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r (Remmeber to do that !)
4. Reboot and enjoy


#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25


# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0

# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1

# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1

# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1

# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1

dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20

# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1

#NEW

ro.ril.power_collapse=1
pm.sleep_mode=1
wifi.supplicant_scan_interval=180
power.saving.mode=1
ro.com.google.networklocation=0
ro.kernel.android.checkjni=0
ro.config.nocheckin=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
profiler.force_disable_err_rpt=1

# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100

debug.performance.tuning=1
persist.sys.use_dithering=0
persist.sys.use_16bpp_alpha=1
ro.min.fling_velocity=8000
ro.mot.eri.losalert.delay=1000

persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
persist.sys.purgeable_assets=1
ro.telephony.call_ring.delay=0
debug.composition.type=c2d
persist.sys.composition.type=c2d
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
ro.fb.mode=1
ro.sf.compbypass.enable=0

hw3d.force=1
ro.product.gpu.driver=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
persist.sampling_profiler=0
persist.sys.ui.hw=1
ro.config.disable.hw_accel=false
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
ro.vold.umsdirtyratio=20
hwui.disable_vsync=true

persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
touch.pressure.scale=0.001

windowsmgr.max_events_per_sec=200
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000

net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4

#3G tweaks [skip if it causes any performance drop]

ro.ril.hsxpa=2
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=28
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.gprsclass=12
ro.ril.hsupa.category=7
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.cust.tel.eons=1

net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576

media.stagefright.enable-http=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
media.stagefright.enable-record=true


#Indicator_häçk
captive_portal_detection_enabled=0
dalvik.vm.dex2oat-filter=interpret-only
dalvik.vm.image-dex2oat-filter=speed

CTO