What's new

Closed ★ ★ ★Wi-tribe EX-230 & EX-250,DV-235,DV235T,OX-230,COMPLETE TUTORIAL (H@ck!ng..Tweaking etc. ) ★ ★ ★

Status
Not open for further replies.
idol baka pwede naman makahingi ng 1:1 wi-tribe ba mac . pa pm nalang po . salamat :D feed back po ako ASAP pwamise
 
akoxiijhay said:
stable po sir .. sinubukan ko sa 22i ko ok naman sya .. pero pag binalik ko sa dv .. wala na syang connection .. then nung pinalitan ko yung wifi pass .. mura na yung nakalagay .... di kaya na remote ?
Click to expand...
aw remote kana nyan mdali lang gawan ng paraan yan..

via scripf mo sya palitan ng mac

Code: 
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 10.1.1.254"
cloner.SendKeys("{Enter}")
WScript.Sleep 4000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"youpassword"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"router"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wan mac 04:XX:XX:XX:XX:XXX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wimax"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth username generatedmacpassword@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"generatedmacpassword"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth a-id 04XXXXXXXXXX@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth auto-prepend enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth ignore-cv enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"reboot"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"GLOBE: CHANGE MAC SUCCESSFULL!"
WScript.Sleep 1000

kung di mo alam pano isave download mo nalang yung nasa attachment... basa2x po bago ichange mac
 

Attachments

javacripz said:
aw remote kana nyan mdali lang gawan ng paraan yan..

via scripf mo sya palitan ng mac

Code: 
Set cloner = CreateObject("WScript.Shell")
cloner.run"cmd"
WScript.Sleep 500

cloner.SendKeys"color a"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"telnet 10.1.1.254"
cloner.SendKeys("{Enter}")
WScript.Sleep 4000

cloner.SendKeys"admin"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"youpassword"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"router"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wan mac 04:XX:XX:XX:XX:XXX"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wimax"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth username generatedmacpassword@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"generatedmacpassword"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth a-id 04XXXXXXXXXX@globelines.com.ph"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth auto-prepend enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"wmx auth ignore-cv enable"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"commit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"exit"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"reboot"
cloner.SendKeys("{Enter}")
WScript.Sleep 1000

cloner.SendKeys"GLOBE: CHANGE MAC SUCCESSFULL!"
WScript.Sleep 1000

kung di mo alam pano isave dØwnlØad mo nalang yung nasa attachment... basa2x po bago ichange mac
Click to expand...



... sir ok na po ... yung mac na naremote katay na agad .. pinalitan ko nalang ng mac .. 22i at dv po gamit ko para di nag aagawan ng connection .. kung gagamit ng wifi .. MARAMING SALAMAT SIR JAVA ..
 
wind123 said:
Boss javacripz. paki check naman to bakit gnun.ilang beses ko na din sya flinash,.

tapos ang user/user parin ang log in ko..

pano to boss.tulong po... :)
Click to expand...
try mo gawing bm622m ang firmware pag napasok mona change mac ka then blik mo sa dv firmware
 
javacripz said:
Flashing Greenpacket DV235t Firmware to Huawei BM622m 2012

DISCLAIMER: IM NOT RESPONSIBLE FOR BRICKED OR BOOTLOOPED MODEMS, TRY THIS AT YOUR OWN RISK! If you point the finger at me for messing up your modem, I will laugh at you.

1. dØwnlØad this firmware You do not have permission to view the full content of this post. Log in or register now.

2. Login to your myBro's GUI using admin account: 192.168.15.1 for 1.0.7 based firmwares / 10.1.1.254 for 1.0.4/1.0.5 firmwares.

3. Go to Management > Upgrade section of your GUI then locate the downloaded firmware.

4. Click on upload and wait for the flashing to finish.

5. The device will now reboot, wait for it to boot again and push the reset button with any pointed object for 1 min.

6. The device will boot again wait for your modem to complete its boot.

7. Unplug your modem's UTP cable and plug it again.

8. Check your LAN's gateway IP address it should be "192.168.254.1"

9. Now login to your new GUI to check if the flashing process is okay by opening your browser and opening 192.168.254.1.

10. Public info should display (BM622m users are familliar with this) then click on login and use this account to open your GUI " Username = user, Password = 0SlO051O"

11. Now that you are logged in let's enable your telnet by opening a new tab on your browser and pasting this to your browser "You do not have permission to view the full content of this post. Log in or register now."

12. Check Telnet > LAN and click on apply.

13. Now dØwnlØad the script You do not have permission to view the full content of this post. Log in or register now....Changepass.vYou do not have permission to view the full content of this post. Log in or register now." it will change your admin password without the need of generating admin password.

14. Double click "changepass.vbs" and wait for the script to finish and click the keys "ctrl + D".

15. Now go back to your modem's new GUI and login with this details "Username = admin, Password = "admin"

16. Boom you are now logged in to your bm622m firmware's admin page.. Enjoy!


ADVANTAGES:

​


    • You can now snipe 22m series macs and use any 22m supported tools
    • More stable and consistent for both Smart and Globe macs
    • More secured and say no more to "Remote häçkers"
    • You can now see your Wimax connect and change frequency realtime
    • Easier to disable TELNET and HTTP over WAN
    • Customize both Admin and User passwords
    • Supported by many tools

DISADVANTAGES:
​


    • Wifi is not supported

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T

Frequency Changer for SMART and GLOBE
You do not have permission to view the full content of this post. Log in or register now.​
Click to expand...

sir deadlink po ung firmware
 
Status
Not open for further replies.

Similar threads

Popular Tags

936 access admin admin access antenna b312-939 b315s-936 bm622i bm622m broadband converge dsl firmware free mac free mac address globe globe at home help home huawei imbz internet jpotz lift mac mac 2015 mac add mac address mac address 2016 macs modem modem 936 od mac openline pldt prepaid router s10g smart tools tutorial unlock wifi wimax wimax & canopy modems yayadub zlt zlt s10g zte [gm]blackheaven

About this Thread

  • 617
    Replies
  • 150K
    Views
  • 218
    Participants
Last reply from:
J-V-S

New Topics

Popular On This Forum

Online statistics

Members online
993
Guests online
5,137
Total visitors
6,130
Back
Top