S·T·S UPDATED: PLDT FX ID3! Pasok Dito! Tips fo us!

[Jhainemo429]

At sir pwd ba to gawin sa cp lng? Mag upload ng firmware? Tapos pa ling naman sir ng 1.1.3t

yes po pwede

 

[Ctych]

1.1.0 muna mga paps gamitin nyo.kung gusto nyo band 1 ganito pagseset at paglolock..
1.punta kayo sa b28 management
2.uncheck nyo lahat
3.set nyo sa times 23 55 yung sa dulo lang
4.lagay nyo sa disconects times add band1 is (1).kung 41 naman palitan nyo lang yung 1 ng 41 at check nyo ang band 41
5.select apply at hintayin mag sucessfull
6.check nyo na ngayon kung naka band 1 na pag hindi pa rin.disable enable lang ng b28 management
7.kapag naka band 1 na punta na kayo sa upload firmware at gamitin nyo yung 1.1 3t
8.wag nyo i factory reset para hindi magpalit ang password nyo pag maglolog in sa dashboard.
9.boom na yan.stable na yan sa band 1 or kung anung band ang malakas sainyo..pag nawala ang net nyo restart nyo lang modem nyo babalik din yan
10.last ang pinaka importante ay doon sa times halimbawa kung gusto nyo band 3.dapat dun sa time disconect ay 3 din ang ilagay nyo..at dapat ay 23.55 lang para stable ang pinili nyong band at maselect din...feedback nalang kayo.pag nagawa nyo na...

Working to nasa band 1 lang yung band ko.

Kaso ang prob ko sa 1.1.3t is red yung signal ko kahit mabilis net ko siguro need ko buy external antenna tlga

Pero prob ko nmn sa version 1.1.0 is bumabalik tlga sa band 28.

 

[pcjamora]

skin green signal pro no internet connection if e troubleshoot ko sa win10 it says ethernet doesnt have a valid ip adrdres. any solution po? after ko mag login sa 192.168.1.1 ilang mins lng no connection na agad at di na ako mka connect sa admin. need pa ereset thru cmd. buti nlng na rollback ko ulit sa dating firmware.

 

[Treszs]

Salamat po.

 

[jonpriks]

HI meron po ditong may Smart firmware ng Evoluzn FX-ID3 - Thanks po

 

[Rhed Dravenn]

Working to nasa band 1 lang yung band ko.

Kaso ang prob ko sa 1.1.3t is red yung signal ko kahit mabilis net ko siguro need ko buy external antenna tlga

Pero prob ko nmn sa version 1.1.0 is bumabalik tlga sa band 28.

lagyan mo lang external antenna lods..sa shopee meron search mo lang sma

 

[Ctych]

lagyan mo lang external antenna lods..sa shopee meron search mo lang sma

Meron na sir hehe nilagyan ko na external antenna green na sya sadyang mahina lang ata tlga band 1 pero mabilis hehe

 

[lacosta102]

Salamat Boss!

 

[Ldis]

Any link po n tuorial for this

 

[bjarnco32]

Just my 2c:

I don't think the Smart Evoluzn ID3 v1.1.3 can be considered an upgrade over the PLDT Evoluzn ID3 v1.1.0 release. Sure, their version difference make it look like one is an upgrade over the other, but when you go under-the-hood, then it becomes clear:

v1.1.3:

# cat /proc/version
Linux version 2.6.36 (hxl@wpengteam-PowerEdge-T430) (gcc version 3.4.2) #278 Fri May 26 10:43:32 CST 2017

# busybox
BusyBox v1.12.1 (2017-05-25 19:22:57 CST) multi-call binary
<snip>

v1.1.0:

# cat /proc/version
Linux version 2.6.36 (hzj@wpengteam-PowerEdge-T430) (gcc version 3.4.2) #233 Fri Nov 16 09:58:25 CST 2018

# busybox
BusyBox v1.12.1 (2018-11-15 18:11:54 CST) multi-call binary
<snip>

As you can see, both kernel- and user-land versions are older (2017) in v1.1.3, while in v1.1.0 they are newer (2018). This also means that there have been code additions and/or fixes between 2017 and 2018 and this is evident in the local filesystem.

While there are many present webui settings in v1.1.3 but not in v1.1.0, that doesn't mean they don't exist in v1.1.0. And the reverse is also true: those present in v1.1.0 but not in v1.1.3, that doesn't mean they don't exist in v1.1.3. They are simply hidden.

My advice would be to stick to the newer release, which is v1.1.0.

 

[bjarnco32]

UPDATE:

As luck would have it, there's a newer Smart Evoluzn ID3 1.2.4 release. Download link and version infos here

 Download: http://id3ps.evoluzn.com/Evoluzn_FX_ID3_1.2.4.bin

# cat /proc/version
Linux version 2.6.36+ (hzj@wpengteam-PowerEdge-T430) (gcc version 3.4.2) #22 Thu Oct 25 17:21:16 CST 2018

# busybox
BusyBox v1.12.1 (2018-10-25 17:19:47 CST) multi-call binary
<snip>

I like this green theme more than the red. And this also presents more webui settings than the v1.1.0 so you don't have to hunt for them. The only caveat is that 'B28 Management' is missing under 'advance.asp', but you can have this back by using this url path 'idu/bodysetting_lteband.asp'

 

[symbPH2k16]

Working ang band 28 boss? Or band selection?

 

[Ctych]

UPDATE:

As luck would have it, there's a newer Smart Evoluzn ID3 1.2.4 release. Download link and version infos here

 Download: http://id3ps.evoluzn.com/Evoluzn_FX_ID3_1.2.4.bin

# cat /proc/version
Linux version 2.6.36+ (hzj@wpengteam-PowerEdge-T430) (gcc version 3.4.2) #22 Thu Oct 25 17:21:16 CST 2018

# busybox
BusyBox v1.12.1 (2018-10-25 17:19:47 CST) multi-call binary
<snip>

I like this green theme more than the red. And this also presents more webui settings than the v1.1.0 so you don't have to hunt for them. The only caveat is that 'B28 Management' is missing under 'advance.asp', but you can have this back by using this url path 'idu/bodysetting_lteband.asp'

View attachment 984313

Boss Hindi ako maka pag lock sa band 40 bumabalik sya lagi sa disable

 

[Bogsmobilen]

ng na try ko lagi nlang limetted service kahat naka 4g na wala paring signal. sana di ko nalang yon genalaw

 

[Dr Doofenshmirtz]

Pldt home prepaid ba gamit mo Sir? Yung black?

Meron na sir hehe nilagyan ko na external antenna green na sya sadyang mahina lang ata tlga band 1 pero mabilis heh

 

[Ctych]

Pldt home prepaid ba gamit mo Sir? Yung black?black sir. Ok na sir na lolock ko na sya kung ano gusto ko same method. Lock ko muna sa band na gusto sa 1.1.0. pag naka.select na dun tsaka ako upload firmware 1.2.4 then ayun stable na sya sakin sa band 40. Na try ko na din sa band 1. Di na sya lumilipat ng ibang band.

 

[mavebrix21]

I have this PLDT Fx-id3 modem, nag flash ako firmware PLDT_Evoluzn_PLDT_ID3_1.0.7, then nong nag login na ko sa 192.168.1.1 nag refresh loop sya, kahit nong ibalik ko sa dating firmware ganon parin....... any help is highly appreciated....

 

[Domonaticsray]

Eto proven and tested working, tapos dagdag ko lang pag gusto niyo mas stable ang kapit flash niyo tong latest firmware You do not have permission to view the full content of this post. Log in or register now.

Credits to bjarnco32

 

[bjarnco32]

[XX='Domonaticsray, c: 421644, m: 1213639'][/XX] I'm glad it helped.

 

[PororoPenguin]

Nakakalungkot nga lang sir ang kaunti na ng data ng Famload 200 :/