What's new

Closed ★ ★ ★ globe wimax complete tutorial ( h@ck1ng, tweaking etc etc... ) [updated]★ ★ ★

Status
Not open for further replies.
Change Serial Number bm622/bm622i 2010/2011

This for Telnet Command

Bm625 and Bm622 Package Date 2008 - 2010
telnet 192.168.1.1

Bm622i 2010
telnet 192.168.254.1

Login wimax
Password: wimax820

Change Serial Number
Bm622 and old modem
ATP>setserialnum XXXXXXXXXXXXX
ATP>restoredef

Bm622i
ATP>Diag set serialnum XXXXXXXXXXXX

*********************************************************************************
Both Bm622i and Bm622 Package Date 2011 and Bm622m Telnet
Login: Firefly
Password: $P4mb1h1r4N4m4nT0!!

Change Serial Number
For package date 2011
both bm622i and 622
ATP>xiugai serialnumXXXXXXXXXXXX


You dont know what is your Mac? forgot user user pass
modem must be direct on pc/laptop Lan
open a cmd and type arp -a

VIDEO: BM622M FIRMWARE USING SMART MAC ON DV235T
​
 
Last edited:
javacripz said:
image.gif
113.gif



SANA PO AY MAAPPRECIATE NYO ANG GINAWA KO
miss-bone-88.gif
PAANO KAYO MAKAKATULONG:
Dahil naging STICKY ang THREAD ay naging Mahigpit ang mga MODERATORs / MOD TRAINEEs
PAKISUNOD NALANG PO SANA PARA HINDI MAGKAPROBLEMA ( MALAGYAN NG RED REPU )

MGA DAPAT GAWIN (DO's)
1. Simpleng PASASALAMAT / PAGBOTO sa POLL ay ok na kung nakatulong ako sa inyo
2. Respetuhin ang bawat isang MEMBER lalo na yung mga NEWBIE sa WIMAX
3. Kung alam nyo po ang SAGOT sa TANONG ng ibang MEMBER ay maaari nyo pong sagutin ito ng maayos
4. Pwede po kayong magbigay ng SUGGESTION / INFORMATION na wala pa dito para maidagdag ko na lang
- GIVE AND TAKE lang po tayo dito, Mas masaya ko kung may magbibigay ng SUGGESTION para mas gumanda pa ang THREAD at mas maraming MATULUNGAN


MGA HINDI DAPAT GAWIN (DONT's)
1.OFF TOPIC - Ang sasagutin ko lang po ay yung tungkol lang sa TUTORIAL/ BASIC QUESTIONS kung meron kayong hindi NAINTINDIHAN / NAGUGULUHAN kayo about sa THREAD





2.SPAM - Kung wala kang magandang sasabihin
miss-bone-89.gif
or TROLL ka

lang
200.gif
ay wag ka na lang mag POST para hindi ka maging kahiya hiya



miss-bone-87.gif
Pinagsama sama ko po lahat ng TUTORIAL dito para hindi na mahirapan maghanap ang mga bago sa WIMAX dahil lahat naman tayo ay naging NEWBIE at sa totoo lang ay mahirap talaga maghanap ng mga TUTORIAL lalo na pag wala ka talagang alam dahil hindi mo alam kung saan ka magsisimula.


Hindi ko po kinakanya ang mga TUTORIAL dito dahil hindi ako ang nakadiskubre nito, ang gusto ko lang mangyari ay mas madaling maintindihan to ng mga MEMBER ng phcorner kaya naglagay ako ngDETAILED na EXPLANASYON at SCREENSHOT para mas mapadali ang PAG AARAL.

Ang lahat ng PICTURE sa THREAD ko
078.gif
bukod sa mga PICTURE ng WIMAX MODEM ay sarili kong gawa kaya nilagyan ko ng NAME ko para hindi ako masabihang kopya lang sa ibang SITE.

005.gif
PAKI INTINDI / PAKI UNAWAnalang pong mabuti ang mga nakasulat sa thread para maiwasan din ang problema or kalituhan, ito po ay tinatawag ng SPOONFEEDING ng marami kasi talagang nandyan na talaga LAHAT kailangan mo nalang talagang INTINDIHIN, pag hindi mo padin NAGETS tong GINAWA ko dito ay nasasayo na ang PROBLEMA at wala sa AKIN.


PARA MALINAW PO UULITIN KO HINDI PO AKO ANG NAKADISKURBE NG MGA TUTORIAL DITO, INAYOS KO LANG AT PINAGSAMA SAMA TAPOS NILAGYAN NG DETAILED EXPLANATION AT SCREENSHOT PARA MADALI MAGETS KAYA CREDIT PO SA NAKADISKUBRE

Unang Tutorial para hindi kayo mahirapan MAGHANAP ng gusto niyong BASAHIN sa THREAD

mt_Z2_Wnd.png




Credit to SHUKUTUFU
Shared ko lang dito para naman sa mga newbie pag bawal paki close nalang :)
Click to expand...


Sir Question lng po, Ano bang magandang tools para sa bm622-2007-10, hirap na kasing mag hanap ng mga MAC ngaun eh!!
thanks in advance :)
 
javacripz said:
huawei_bm622m_wimax_cpe_4g_router.jpg
downgrade your BM622m 2013 to 2012 [SOLUTION]

his tutorial will teach you how to downgrage your Globe Huawei BM622m package 2013.
There are several reason why you need to downgrade your device.

1.) For you to change the mac address
2.) Package 2012 is supported by the You do not have permission to view the full content of this post. Log in or register now.



To start with, you will be needing these requirements:
1.)You do not have permission to view the full content of this post. Log in or register now.
2.) You do not have permission to view the full content of this post. Log in or register now. 2012 firmware for BM622m (LINK WAS FIXED)

Procedure:
1.) Turn OFF your WiFi or unplug your networking cable from your PC
2.) Extract the You do not have permission to view the full content of this post. Log in or register now. on your desktop and double click WinSpreader.exe
3.) Locate the firmware which you have dØwnlØaded and select your LAN or Ethernet Adapter (gagamitin natin ay cable para iwas sira)
4.) Then click start.
5.) Plug a networking cable to your BM622m and plug it to your PC. (NOTE: MARAMI ANG NAGKAKAMALI DITO. DAPAT PO DI PA NAKASAKSAK ANG MODEM NYO SA ADAPTOR)
1.jpg
6.) Plug your power adaptor (YUN, EXCITED NA SI APO)
2.jpg
7.) You will see the signal led running an indication that the firmware is being burned to its board. (Wait for about 2 minutes to finish)
8.) Kapag 5 LED ang nag bi-blink, click STOP at hugutin ang power adaptor ulit.
9.) Mag login sa GUI 192.168.254.1 | user |0SlO0510 > Restore Default (Mag re-restart ang modem mo)
Or just simply press the physical reset button of your wimax.
10.) BOOM, 2012 package na ang BM622m mo :) Congratz!
Click to expand...
javacripz said:
huawei_bm622m_wimax_cpe_4g_router.jpg
downgrade your BM622m 2013 to 2012 [SOLUTION]

his tutorial will teach you how to downgrage your Globe Huawei BM622m package 2013.
There are several reason why you need to downgrade your device.

1.) For you to change the mac address
2.) Package 2012 is supported by the You do not have permission to view the full content of this post. Log in or register now.



To start with, you will be needing these requirements:
1.)You do not have permission to view the full content of this post. Log in or register now.
2.) You do not have permission to view the full content of this post. Log in or register now. 2012 firmware for BM622m (LINK WAS FIXED)

Procedure:
1.) Turn OFF your WiFi or unplug your networking cable from your PC
2.) Extract the You do not have permission to view the full content of this post. Log in or register now. on your desktop and double click WinSpreader.exe
3.) Locate the firmware which you have dØwnlØaded and select your LAN or Ethernet Adapter (gagamitin natin ay cable para iwas sira)
4.) Then click start.
5.) Plug a networking cable to your BM622m and plug it to your PC. (NOTE: MARAMI ANG NAGKAKAMALI DITO. DAPAT PO DI PA NAKASAKSAK ANG MODEM NYO SA ADAPTOR)
1.jpg
6.) Plug your power adaptor (YUN, EXCITED NA SI APO)
2.jpg
7.) You will see the signal led running an indication that the firmware is being burned to its board. (Wait for about 2 minutes to finish)
8.) Kapag 5 LED ang nag bi-blink, click STOP at hugutin ang power adaptor ulit.
9.) Mag login sa GUI 192.168.254.1 | user |0SlO0510 > Restore Default (Mag re-restart ang modem mo)
Or just simply press the physical reset button of your wimax.
10.) BOOM, 2012 package na ang BM622m mo :) Congratz!
Click to expand...

boss javacripz nkita q na...salamat=)
 

Attachments

paki sagot nmn po d ko po maintindhihan ano po ung basemac na tntawag s sniping? newbie here po

basemac po ba at working mac addrsss ko iisa lng po ba un?nguguluhan po kc ako dun sa tools na may basemac pplitan ko po ba ung settings na un sa pag snipe ung basemac po nkalgay pplitan ko po ba ng working mac pa help please.....
 
Last edited by a moderator:
sir pa help naman po ako sa bm6221i kasi di ako marunong mag snipe niloko ako ng binilhan koh cya daw bahala pag na discon pa help po salamat
 
lhanmaan19 said:
paki sagot nmn po d ko po maintindhihan ano po ung basemac na tntawag s sniping? newbie here po

basemac po ba at working mac addrsss ko iisa lng po ba un?nguguluhan po kc ako dun sa tools na may basemac pplitan ko po ba ung settings na un sa pag snipe ung basemac po nkalgay pplitan ko po ba ng working mac pa help please.....
Click to expand...

kahit dead na ung mac pwde mong ibase mac... oo papalitan mo yun kung gusto mo mag snipe chaka my tutorial naman ako nya dito magbasa po kasi sir
 
Last edited by a moderator:
cjhino007 said:
sir pa help naman po ako sa bm6221i kasi di ako marunong mag snipe niloko ako ng binilhan koh cya daw bahala pag na discon pa help po salamat
Click to expand...
bm622i ano po yan 2010 or 2011 pag 2011 yan walang pang snipe jan.. pero qng 2010 yan eh matutulongan kita jan
 
Status
Not open for further replies.

Similar threads

Popular Tags

936 access admin admin access antenna b312-939 b315s-936 bm622i bm622m broadband converge dsl firmware free mac free mac address globe globe at home help home huawei imbz internet jpotz lift mac mac 2015 mac add mac address mac address 2016 macs modem modem 936 od mac openline pldt prepaid router s10g smart tools tutorial unlock wifi wimax wimax & canopy modems yayadub zlt zlt s10g zte [gm]blackheaven

About this Thread

  • 644
    Replies
  • 193K
    Views
  • 317
    Participants
Last reply from:
H4wk3y3

New Topics

Popular On This Forum

Online statistics

Members online
354
Guests online
5,031
Total visitors
5,385
Back
Top