Hi Guys! nababaliw na akong mag hanap ng solution sa pag access ng gateway ng router/modem na to. tinry ko na below ung mga pedeng gamitin.
Take Note: I USED LAPTOP OR MOBILE PHONE.
1. Reset Router
2. Check CMD ipconfig/all my default after resetting is 192.168.1.1
3. Connection time out nd maaccess ung gateway sa browser google chrome, internet explorer, microsoft edge at firefox
4. First try ko tinype mga to ng nakaconnect fiber cable You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now.ssl:80 or You do not have permission to view the full content of this post. Log in or register now.index.htm or You do not have permission to view the full content of this post. Log in or register now./fh then try ko din na naka disconnect yung fiber cable wala parin.
5. ginawa ko din ito:
1. Turn off your router
2. Unplug / Disconnect fiber cable from the router
3. TURN IT BACK ON ( without the fiber cable attached ) and access the router GUI by going to your browser and type to the address bar the default I.P address of your router which is 192.168.1.1 then log in.
4. Apply all settings you want to do then when you're finished.
5. Turn off your router
6. Reconnect the fiber cable to the router.
7. Turn on the Router
Hope my makatulong sakin. Maraming salamat guys!
Take Note: I USED LAPTOP OR MOBILE PHONE.
1. Reset Router
2. Check CMD ipconfig/all my default after resetting is 192.168.1.1
3. Connection time out nd maaccess ung gateway sa browser google chrome, internet explorer, microsoft edge at firefox
4. First try ko tinype mga to ng nakaconnect fiber cable You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now. or You do not have permission to view the full content of this post. Log in or register now.ssl:80 or You do not have permission to view the full content of this post. Log in or register now.index.htm or You do not have permission to view the full content of this post. Log in or register now./fh then try ko din na naka disconnect yung fiber cable wala parin.
5. ginawa ko din ito:
1. Turn off your router
2. Unplug / Disconnect fiber cable from the router
3. TURN IT BACK ON ( without the fiber cable attached ) and access the router GUI by going to your browser and type to the address bar the default I.P address of your router which is 192.168.1.1 then log in.
4. Apply all settings you want to do then when you're finished.
5. Turn off your router
6. Reconnect the fiber cable to the router.
7. Turn on the Router
Hope my makatulong sakin. Maraming salamat guys!