Help Cisco AP Issue

[v2clone]

Baka meron ng naka experience ng ganitong issue
Meron kaming 50 units ng Cisco AIR-AP2802I-E-K9 at 2 AP nito ay may issue, not enough poe power.
Troubleshooting na ginawa

• Sinaksak ko sa poe switch kung saan nakasaksak ang working ap - same issue
• Nagpalit ng ρá†ch cable at sinaksak mismo sa poe switch - same issue
• Gumamit ako ng poe injector Cisco AIR-PWRINJ6 - same issue

Boot logs

[*09/15/2023 00:30:59.2929] HW CAPWAP tunnel is ADDED
[*09/15/2023 00:30:59.3053] CAPWAP State: Image Data
[*09/15/2023 00:30:59.3[09/15/2023 00:30:59.5300] Drop profile #2 is created: td=16 KBytes, red=16 KBytes
056] CAPWAP State: Configure
[*09/15/2023 00:31:00.1355] Radio0 not started, not enough POE power
[*09/15/2023 00:31:00.1593] DOT11_DRV[0]: set_channel Channel set to 1
[*09/15/2023 00:31:00.5397] DOT11_DRV[0]: set_channel Channel set to 1
[*09/15/2023 00:31:01.2261] Radio1 not started, not enough POE power
[*09/15/2023 00:31:01.2521] DOT11_DRV[1]: set_channel Channel set to 36
[*09/15/2023 00:31:01.7089] DOT11_DRV[1]: set_channel Channel set to 36
[*09/15/2023 00:31:02.2483] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Configure(8).
[*09/15/2023 00:31:02.2484] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Configure(8).
[*09/15/2023 00:31:02.2485] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Configure(8).
[*09/15/2023 00:31:02.2485] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Configure(8).
[*09/15/2023 00:31:02.2486] Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Configure(8).
[*09/15/2023 00:31:02.3033] Radio0 not started, not enough POE power
[*09/15/2023 00:31:02.3036] Radio1 not started, not enough POE power
[*09/15/2023 00:31:02.3040] Radio0 not started, not enough POE power
[*09/15/2023 00:31:02.3043] Radio1 not started, not enough POE power
[*09/15/2023 00:31:02.3111] Radio0 not started, not enough POE power
[*09/15/2023 00:31:02.3329] DOT11_DRV[0]: set_channel Channel set to 1
[*09/15/2023 00:31:02.9010] Radio1 not started, not enough POE power
[*09/15/2023 00:31:02.9270] DOT11_DRV[1]: set_channel Channel set to 36
[*09/15/2023 00:31:03.3917] DOT11_DRV[1]: set_channel Channel set to 36
[*09/15/2023 00:31:03.9244] CAPWAP State: Run
[*09/15/2023 00:31:03.9493] CAPWAP HW tunnel params changed, UPDATING the existing
[*09/15/2023 00:31:03.9983] AP has joined controller Cisco_Controller_Primary

 

[Arjienx]

try to consider the power line or create a dedicated power supply direct in breaker.
compute your power supply breaker related to your power consumption.

or simply call a electrician to sort things out.

 

[v2clone]

We have dedicated power source for our IDF's. Issue is only on this 2 access point are having this issue. Rest AP are all working well.

 

[Arjienx]

We have dedicated power source for our IDF's. Issue is only on this 2 access point are having this issue. Rest AP are all working well.

if issue is inevitable you may consider replacing those units.

 

[v2clone]

if issue is inevitable you may consider replacing those units.

Waley na tinapon na.