1. Welcome to the Filipino Community - PHcorner.net

    Take a moment to Signup and gain unlimited access to the forums and extra privileges that our browsing guests are not entitled to.
    Having an account grants you additional privileges, such as:

VPN TroubleShooting and Complete OpenVPN Codes Tutorial

Discussion in 'Mobile Network Help & Support' started by jamesiswizard_1, Aug 27, 2012.

  1. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    Please or Register to view links

    main site openvpn and dØwnlØad Please or Register to view links

    VPN Troubleshooting

    Windows Users:

    Vista and Windows 7:

    -- "I cannot connect" - or - "TAP driver fails to load..."
    -- "Personal VPN connects but does not unblock web sites or change my IP..."

    This is a common error when the OpenVPN GUI is not launched as administrator
    To permanently set Vista to run OpenVPN as administrator and avoid this requirement.

    Windows Vista Setup and Operation

    Setup:

    On Windows Vista, you will need to run the OpenVPN installer with administrator privileges so that it can properly install the TAP driver which makes the VPN work.
    Right-click on the installer that you downloaded and select 'Run as administrator'
    Vista run as administrator

    [​IMG]

    Operation:

    After installing, you will need to right-click on the OpenVPN GUI icon and select 'Run as administrator' which allows OpenVPN to add routes to the routing tables that are pulled from the server

    [​IMG]

    To avoid having to do this every time, you can set up the file to have these permissions as your default (probably the best long-term approach to simplify Vista startup)

    Vista has a feature called UAC (User Account Control) which prevents programs running under administrator accounts from having administrator access. This feature causes OpenVPN to not run properly which is why you have to right click and run the application as administrator. In some cases, Vista is configured in such a way where the 'Run as administrator' command is ignored. Should this occur, follow the directions here to disable the UAC.

    Windows 7 Setup

    To install, the application has to be Run as Administrator:

    After downloading, right-click on the file and select Run as Administrator

    Agree to any questions that pop up. Click next where prompted.

    Note: The installation of the TAP adapter can sometimes take up to a minute. Do not exit the installer while the TAP adapter is being processed.

    Now that setup is complete you also need to set the program for Vista Compatibility mode and as Administrator:

    1) Find the file 'openvpn-gui.exe' that was just installed then right-click and select 'properties'

    You can find this file by entering OpenVPN-GUI in the search box in the Start Menu

    Right click on the file and select Properties

    Compatibility mode for OpenVPN in Windows 7

    [​IMG]

    2) Click on the Compatibility tab

    Check the box next to 'Run the program in compatibility mode for' and select 'Windows Vista Service pack 1'

    Check the box next to 'Run this program as administrator' and click on 'Apply' and then 'OK' to exit

    [​IMG]

    Windows 7 vpn service

    The steps above do not need to be repeated after the initial setup.
    You are now ready to launch the GUI into the system tray so you can log in
    Launch the GUI by double clicking on the desktop OpenVPN-GUI icon or from the Start Menu
    This will place the application in the system tray
    Go to the system tray, right-click and pick your connection then select 'Connect'

    [​IMG]

    Personal VPN connection options

    A window will pop up -- enter your user and password and the VPN will connect

    You know you are connected when the red icon turns green

    Connected to the Personal VPN

    You can log in and out using the system tray icon as many times as you wish. If you reboot the computer or exit the application from the system tray re-launch the icon using the OpenVPN-GUI icon.

    XP, Vista, Windows 7 and 2000:

    -- "Personal VPN connects but I cannot reach the internet ..."
    Windows User: "OpenVpn connects but I cannot reach the internet"
    Initialization sequence completed with errors - in log file

    This is usually the result of Windows Firewall or a third party firewall that you may be running which is blocking the TAP adapter. If you are using a third party firewall, reference your user's manual on how to allow programs to pass through. In some cases, there will be a tab that lists programs that are allowed. Find 'OpenVPN' and allow access.

    For Windows Firewall:
    From the Control Panel, select 'Firewall' then 'Advanced'
    Select the connection that corresponds to your TAP adapter
    Uncheck the box next to it and select 'OK'
    Reboot your computer to ensure the setting takes effect

    [​IMG]

    If you don't know which connection that is, go to 'Control Panel' and select 'Network Connections'

    Your TAP adapter will be listed:
    VPN tap adapter

    [​IMG]

    One other possibility for this error is that the Windows DHCP client service is not set to start on your computer.

    From the Control Panel, select 'Administrative Tools' then 'Services' and make sure that the DHCP Client Service is started (see the image below)
    If it is not started, right click and start the service.

    [​IMG]


    -- "Bandwidth speed seems to drop or be slow ..."
    Windows User: "Bandwidth speed seems to drop or be slow....?"

    Unlike some VPN services, OpenVPN does not throttle any speeds on our end. We give you a wide open connection through the network. However, the OpenVPN application on your computer, when it installs in Windows, is given a "Normal Priority". In most cases, this is adequate. However, on some computers that have a lot of other processing going on, the processor could become highly loaded and give the VPN less processing time than it needs for optimal performance. This can be resolved by setting the priority of the application to "High". To do this, you have to edit the Windows registry. (NOTE: You should always backup the registry before making any changes to it.)

    To change the process priority:

    --Go to 'Start', select 'Run', type 'regedit'

    --Go to 'HKEY_LOCAL_MACHINE\SOFTWARE'

    --Select 'OpenVPN' and click on the 'priority' link

    --Change it to 'HIGH_PRIORITY_CLASS'

    --Select 'OpenVPN-GUI' and repeat the process

    --Exit and you are finished

    Note: On 64 bit Windows systems the OpenVPN and OpenVPN-GUI options will be under the Wow6432Node tab at the bottom of the Software list. Expand Wow6432Node to see the options.

    [​IMG]

    -- "The OpenVPN-GUI icon disappeared from the system tray..."
    Windows User: "The OpenVPN-GUI icon disappeared from the system tray."

    Occasionally, the OpenVPN-GUI icon personal vpn gui icon (2 red computers when inactive) either doesn't appear or disappears from the Windows system tray. This is a common Windows bug not associated with the OpenVPN program. If you try to launch OpenVPN-GUI again, it reports that it is already running. This is a correct report since it is running but just isn't appearing in the tray where it is supposed to. There are many recommended solutions for this which involve disabling portions of the operating system or changing registry entries. We've found a much simpler and quicker solution.

    1) Press the 'Ctrl' and 'Alt' and 'Delete' keys at the same time. The Windows Task Manager will pop up.
    2) Go to the 'Processes' tab. Look for 'openvpn-gui.exe' as shown.

    [​IMG]

    Task Manager showing OpenVPN GUI
    3) Select the line that says 'openvpn-gui.exe'.
    4) Click on 'End Process'.
    5) Close the Task Manager by clicking on the 'X' in the upper right hand corner.
    This will terminate the OpenVPN Gui application allowing you to re-launch it.
    6) Restart OpenVPN GUI by double clicking on the desktop icon personal vpn gui or the Start menu icon.
    This will place the icon in the system tray and you can proceed as normal from that point.

    The above illustrates this function on Windows XP. Windows Vista and Windows 7 work the same way but the screens will have the Vista or Windows 7 style and look a bit different than the image above. When initially pressing Ctrl-Alt-Del, Vista and Windows 7 will pop up a screen with several options. Select 'Task Manager' from that screen.

    -- "NOTE: FlushIpNetTable failed on interface..."
    Windows User: "NOTE: FlushIpNetTable failed on interface"

    This note can appear in the log as OpenVPN connects to the VPN server. This is not a fatal error and the connection can continue normally. It is telling you is that the ARP table was not flushed. This note occurs when the 'Routing and Remote Access' service is running on your machine. (This setting is normally set to 'disabled' or 'manual' as routing is not a normal function of a laptop or desktop computer.)

    You can ignore this in the log or you can stop it from occurring by turning off the 'Routing and Remote Access' service on your machine, assuming you are not using your computer in some sort of routing mode.
    1) Go to your Control Panel
    2) Select 'Administrative Tools'
    3) Select 'Services'
    4) Find 'Routing and Remote Access' in the list
    5) Right click and set to 'Manual' -- this will prevent it from starting up next time you boot up
    6) To stop the current operation, highlight 'Routing and Remote Access'
    7) Click 'Stop' in the upper left hand part of the screen

    -- "C:\WINDOWS\system32 route.exe failed: The system cannot find the path specified..
    Windows User:
    "CreateProcess C:\WINDOWS\system32 route.exe failed: The system cannot find the path specified"
    "ERROR: Windows route add command failed: external program did not execute -- returned error code -1"."

    This error can appear in the OpenVPN log when Windows is installed on a drive other than C or your Program Files directory is on a drive other than C.
    To resolve this issue:
    From the GUI in the task bar, right-click on the connection and select 'Edit Config'. Paste the following line on any blank line:

    win-sys env

    Save and exit
    Do this for all connection options
    OpenVPN will now follow the system path to the correct location

    -- "All TAP-Win32 adapters on this system are currently in use..."
    'All TAP-Win32 adapters on this system are currently in use'
  2. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    This error in your OpenVPN log file indicates that there are no TAP adapters available on the system for use. The TAP adapter is required to establish the Personal VPN connection.
    One cause could be that the adapter was not properly disconnected from the previous session which could be the result of a system error or an improper shutdown - leaving it in the connected state.
    Another possibility is that the TAP adapter has become corrupted and cannot load properly. Or, was inadvertently removed from the system.
    To check on the status of the TAP adapter:
    Windows XP
    Go to Control Panel - Network Connections
    Windows Vista
    Go to Control Panel - Network and Sharing Center - Manage Network Connections
    Windows 7

    [​IMG]

    Go to Control Panel - Network and Internet - Network and Sharing Center - Change adapter settings
    TAP Adapter
    --If the adapter shows connected after receiving the error, right click on the adapter and select 'disable'. Then, right click again and select 'enable'.
    --If the TAP adapter shows 'disabled', simply right click and select 'enable'.

    --If the TAP adapter does not show on the list in Windows Vista or 7, go to the Start Menu - OpenVPN - Utilities. Right click and run as administrator on 'Add a New Win 32 TAP Adapter'.

    --If the steps above do not correct the problem or you just want to clear it from scratch, reinstall the OpenVPN software. . Be sure to uninstall the old version before re-installing. To uninstall, go to the 'Start Menu' and select the 'OpenVPN' tab and then select 'uninstall'.

    NOTE: This to troubleshoot installation or connection issues

    Disable UAC in Windows 7

    Sometimes disabling the UAC in WIndows 7 will correct installation or connection issues with the Personal VPN software.
    To disable the UAC:
    1) Go to 'Start' and enter 'UAC' in the search bar.
    2) Click on 'Change User Account Control Settings'. You will see the screen below. Slide the slider down as shown to 'never notify' and hit 'OK'. Reboot the computer.

    [​IMG]

    Disable UAC Vista

    Vista has a feature called UAC (User Account Control). The UAC prevents programs running under administrator accounts from having administrator access. This feature causes OpenVPN to not run properly which is why you have to right click and run the application as administrator. In some cases, Vista is configured in such a way that the 'Run as administrator' command is ignored. Should this occur, follow the directions below to allow administrator function. In addition, disabling the UAC for your user account will allow you to launch OpenVPN by a normal double click as opposed to a right click and 'Run as administrator'. Eessentially, it makes Windows Vista behave like Windows XP in this regard.
    Disable UAC for your user account as follows:
    1) Open Control Panel.

    [​IMG]

    2) Under 'User Account and Family Safety', click on the 'Add or remove user account'.

    [​IMG]

    3) Click on your user account.

    [​IMG]

    4) Click on the 'Go to the main User Account page' link.

    [​IMG]

    5) Under 'Make changes to your user account', click on the 'Turn User Account Control on or off' link.

    [​IMG]

    6) Under 'Turn on User Account Control (UAC) to make your computer more secure', click to unselect the 'Use User Account Control (UAC) to help protect your computer'. Click on the 'OK' button.

    [​IMG]

    7) You will be prompted to reboot your computer. Do so when ready.
    After rebooting, you may have to reinstall the software for the drivers to register properly.
    In some cases, Vista is not configured in the standard mode and these options will not show up in the Control Panel. If this occurs, do a Vista help search for 'UAC' and follow the steps as shown below:
    A) Select the 'Help and Support' tab.

    [​IMG]

    B) Type in 'UAC' for the search term and click on the search icon at the right.

    [​IMG]

    C) Select 'Turn User Account on or off'.

    [​IMG]

    D) Click 'Click to open User Accounts'.

    [​IMG]

    This will take you to the same place as step 5 above. Proceed from there.

    Change DNS settings
    Changing DNS entries on Microsoft Windows 7
    To change your Personal VPN DNS entries on Windows 7 (also Vista and XP):

    Go to Start - Control Panel - Network and Internet - Network and Sharing Center - Change Adapter Settings
    For Vista (Control Panel - Network and Sharing Center - Manage Network Connections)
    For XP (Control Panel - Network Connections)
    You will see a screen similar to this:

    [​IMG]

    Right-click on the adapter you wish to change the DNS for then click on 'Properties'
    The following screen will appear:

    [​IMG]

    Double-click on 'Internet Protocol Version 4' as shown by the red arrow
    The following screen will appear:

    [​IMG]

    Click on 'Use the following DNS server addresses'
    Enter the 2 DNS addresses we provide as shown by the red arrows
    Click on 'OK'
    Click on 'OK' again
    Repeat the above steps for all the adapters that you need to change based on our instructions to you.
    Reboot the computer
    To return to your original settings, repeat the process and check the "Obtain DNS server address automatically" button?

    All Users:

    -- "Cannot resolve host address: [NO_DATA] The requested name is valid but does not have an IP address ..."
    Cannot resolve host address:
    [NO_DATA] The requested name is valid but does not have an IP address

    This error in the Openvpn log indicates that DNS (Domain Name Resolution) is not properly resolving the server name and translating it to an IP address it can use. This can be due to several causes but most commonly is due to DNS poisoning in some countries that censor web sites. In essence, the DNS servers in these countries either refuse to resolve the name or provide the wrong IP address leading to a dead link.

    This can be easily resolved by switching the DNS servers on your computer to international ones outside of your country.

    There are many free DNS servers to choose from and all of them will fix the issue. Some common ones are:
    Google DNS - 8.8.8.8 and 8.8.4.4
    OpenDNS - 208.67.222.222 and 208.67.220.220
    Verizon - 4.2.2.1 and 4.2.2.2 and 4.2.2.3 and 4.2.2.4
    If you wish you can mix these up when setting your DNS. For example use one of the Google servers and one of the OpenDNS servers.
    For users outside North America we recommend you use either Google DNS or OpenDNS.

    When changing your DNS servers be sure to change all network adapters you are using. This can include your wireless adapter, your Ethernet adapter and in cases where you are on a PPPoE (also shown as PPP) network the PPPoE adapter.


    SYNOPSIS
    From FreeWRT Manual OpenVPN

    INTRODUCTION

    OpenVPN is an open source VPN daemon by James Yonan. Because OpenVPN
    tries to be a universal VPN tool offering a great deal of flexibility,
    there are a lot of options on this manual page. If you're new to Open-
    VPN, you might want to skip ahead to the examples section where you
    will see how to construct simple VPNs on the command line without even
    needing a configuration file.

    Also note that there's more documentation and examples on the OpenVPN
    web site: Please or Register to view links

    And if you would like to see a shorter version of this manual, see the
    openvpn usage message which can be obtained by running openvpn without
    any parameters.


    openvpn [ --help ]

    openvpn [ --config file ]

    openvpn [ --genkey ] [ --secret file ]

    openvpn [ --mktun ] [ --rmtun ] [ --dev tunX | tapX ]
    [ --dev-type device-type ] [ --dev-node node ]

    openvpn [ --test-crypto ] [ --secret file ] [ --auth alg ]
    [ --cipher alg ] [ --engine ] [ --keysize n ] [ --no-replay ]
    [ --no-iv ]

    openvpn [ --askpass [file] ] [ --auth-nocache ] [ --auth-retry type ]
    [ --auth-user-pass-verify script ] [ --auth-user-pass up ]
    [ --auth alg ] [ --bcast-buffers n ] [ --ca file ]
    [ --ccd-exclusive ] [ --cd dir ] [ --cert file ] [ --chroot dir ]
    [ --cipher alg ] [ --client-cert-not-required ]
    [ --client-config-dir dir ] [ --client-connect script ]
    [ --client-disconnect ] [ --client-to-client ] [ --client ]
    [ --comp-lzo ] [ --comp-noadapt ] [ --config file ]
    [ --connect-freq n sec ] [ --connect-retry n ] [ --crl-verify crl ]
    [ --cryptoapicert select-string ] [ --daemon [progname] ]
    [ --dev-node node ] [ --dev-type device-type ]
    [ --dev tunX | tapX | null ] [ --dev tunX | tapX ] [ --dh file ]
    [ --dhcp-option type [parm] ] [ --dhcp-release ] [ --dhcp-renew ]
    [ --disable-occ ] [ --disable ] [ --down-pre ] [ --down cmd ]
    [ --duplicate-cn ] [ --echo [parms...] ] [ --engine [engine-name] ]
    [ --explicit-exit-notify [n] ] [ --fast-io ] [ --float ]
    [ --fragment max ] [ --genkey ] [ --group group ]
    [ --hand-window n ] [ --hash-size r v ] [ --help ]
    [ --http-proxy-option type [parm] ] [ --http-proxy-retry ]
    [ --http-proxy-timeout n ]
    [ --http-proxy server port [authfile] [auth-method] ]
    [ --ifconfig-noexec ] [ --ifconfig-nowarn ]
    [ --ifconfig-pool-linear ]
    [ --ifconfig-pool-persist file [seconds] ]
    [ --ifconfig-pool start-IP end-IP [netmask] ]
    [ --ifconfig-push local remote-netmask ] [ --ifconfig l rn ]
    [ --inactive n ] [ --inetd [wait|nowait] [progname] ]
    [ --ip-win32 method ] [ --ipchange cmd ]
    [ --iroute network [netmask] ] [ --keepalive n m ]
    [ --këy-method m ] [ --këy file ] [ --keysize n ]
    [ --learn-address cmd ] [ --link-mtu n ] [ --local host ]
    [ --log-append file ] [ --log file ] [ --suppress-timestamps ]
    [ --lport port ] [ --management-hold ] [ --management-log-cache n ]
    [ --management-query-passwords ] [ --management IP port [pw-file] ]
    [ --max-clients n ] [ --max-routes-per-client n ] [ --mktun ]
    [ --mlock ] [ --mode m ] [ --mssfix max ] [ --mtu-disc type ]
    [ --mtu-test ] [ --mute-replay-warnings ] [ --mute n ] [ --nice n ]
    [ --no-iv ] [ --no-replay ] [ --nobind ]
    [ --ns-cert-type client|server ] [ --passtos ] [ --pause-exit ]
    [ --persist-këy ] [ --persist-local-ip ] [ --persist-remote-ip ]
    [ --persist-tun ] [ --ping-exit n ] [ --ping-restart n ]
    [ --ping-timer-rem ] [ --ping n ] [ --pkcs12 file ]
    [ --plugin module-pathname init-string ] [ --port port ]
    [ --proto p ] [ --pull ] [ --push-reset ] [ --push "option" ]
    [ --rcvbuf size ] [ --redirect-gateway ["local"] ["def1"] ]
    [ --remap-usr1 signal ] [ --remote-random ]
    [ --remote host [port] ] [ --reneg-bytes n ] [ --reneg-pkts n ]
    [ --reneg-sec n ] [ --replay-persist file ]
    [ --replay-window n [t] ] [ --resolv-retry n ] [ --rmtun ]
    [ --route-delay [n] [w] ] [ --route-gateway gw ]
    [ --route-method m ] [ --route-noexec ] [ --route-up cmd ]
    [ --route network [netmask] [gateway] [metric] ] [ --rport port ]
    [ --secret file [direction] ] [ --secret file ]
    [ --server-bridge gateway netmask pool-start-IP pool-end-IP ]
    [ --server network netmask ] [ --service exit-event [0|1] ]
    [ --setenv name value ] [ --shaper n ] [ --show-adapters ]
    [ --show-ciphers ] [ --show-digests ] [ --show-engines ]
    [ --show-net-up ] [ --show-net ] [ --show-tls ]
    [ --show-valid-subnets ] [ --single-session ] [ --sndbuf size ]
    [ --socks-proxy-retry ] [ --socks-proxy server [port] ]
    [ --status file [n] ] [ --status-version n ]
    [ --syslog [progname] ] [ --tap-sleep n ] [ --tcp-queue-limit n ]
    [ --test-crypto ] [ --tls-auth file [direction] ]
    [ --tls-cipher l ] [ --tls-client ] [ --tls-exit ]
    [ --tls-remote x509name ] [ --tls-server ] [ --tls-timeout n ]
    [ --tls-verify cmd ] [ --tmp-dir dir ] [ --tran-window n ]
    [ --tun-ipv6 ] [ --tun-mtu-extra n ] [ --tun-mtu n ]
    [ --txqueuelen n ] [ --up-delay ] [ --up-restart ] [ --up cmd ]
    [ --user user ] [ --username-as-common-name ] [ --verb n ]
    [ --writepid file ]

    How to Edit OPENVPN CONFIG files




    To Forget To Hit/Say Thanks
    firewall17, jenro, ghighi and 12 others like this.
  3. ulanbukas

    ulanbukas Addict

    Joined:
    Jun 17, 2011
    Messages:
    360
    Likes:
    103
    Trophies:
    81
    Best Answers:
    0
    Gender:
    Male
    Occupation:
    Palaboy
    Location:
    Cainta Rizal
    bookmark mahaba habang basahan salamat pocket extension ng firefox
  4. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    Credit to Please or Register to view links
    WINDOWS 8

    Globe/smart + pptp vpn on win 8 & 7 simple as abc's

    1.PUMUNTA SA CONTROL PANEL AT PILIIN ANG NETWORK AND SHARING CENTER.
    Please or Register to view links

    2.PILIIN ANG SETUP A NEW CONNECTION OR NETWORK
    Please or Register to view links

    3.PILIIN ANG CONNECT TO A WORKPLACE
    Please or Register to view links

    4.TAPOS ICLICK ANG USE MY INTERNET CONNECTION (VPN)
    Please or Register to view links

    5.TAPOS ILAGAY NYO LANG KUNG ANONG PROVIDER NG PPTP VPN ANG GUSTO NYO NA WORKING....WORKING YANG SAMPLE KO NA YAN...PERO KUNG GUSTO NYO NG UK AT CANADA SEARCH NA LANG KAYO..
    Please or Register to view links

    6.SA WINDOWS 8 LEFT CLICK ANG GAGAMITIN AT DI KATULAD SA WIN 7 NA RIGHTLICK PARA IKONEK..
    Please or Register to view links

    7.PAGKATAPOS NYONG MAPINDOT YUNG CONNECT AY ITO ANG LALABAS AT INPUT NYO LANG SA USERNAME AY: FREE AT ANG PASSWORD AY : 1234
    Please or Register to view links

    8.DONE...
    Please or Register to view links
  5. ulanbukas

    ulanbukas Addict

    Joined:
    Jun 17, 2011
    Messages:
    360
    Likes:
    103
    Trophies:
    81
    Best Answers:
    0
    Gender:
    Male
    Occupation:
    Palaboy
    Location:
    Cainta Rizal
    ganun ba ayaw ko kasi google chrome ang lalimng tagalog hahaha salamat ulit
    tanong nalang ko sa hindi ko magets
  6. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    WINDOWS 7

    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links
    Please or Register to view links

    RESULT
    Please or Register to view links

    Hit Thanks
  7. schemes

    schemes Moderating 24/7

    Joined:
    Aug 22, 2011
    Messages:
    335
    Likes:
    143
    Trophies:
    81
    Best Answers:
    0
    Gender:
    Female
    Occupation:
    Internet Surfer
    Location:
    Philippines
    Nice thread, nakakanosebleed naman ng mga VPN terms
    :ROFLMAO: Thanks for sharing Sir IPv6 expert ;)
    jamesiswizard_1 likes this.
  8. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    [​IMG]
    laVaCHE likes this.
  9. icarus viloria

    icarus viloria Leecher

    Joined:
    Sep 6, 2012
    Messages:
    1
    Likes:
    0
    Trophies:
    11
    Best Answers:
    0
    Gender:
    Male
    ahm...san poh pwde idownload VPN pwde poh ba sa window xp microsoft?
  10. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    Please or Register to view links ito oh
  11. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
  12. novus23

    novus23 Leecher

    Joined:
    Sep 15, 2012
    Messages:
    17
    Likes:
    0
    Trophies:
    13
    Best Answers:
    0
    Gender:
    Male
    Yun OH:eek::eek: ... Sticky n thread ni Bossing.. Idol tlga..:cool::cool::cool:
  13. Last_Society

    Last_Society Enthusiast

    Joined:
    Oct 14, 2012
    Messages:
    122
    Likes:
    100
    Trophies:
    42
    Best Answers:
    0
    Gender:
    Male
    Location:
    C:\Documents and Settings
    Aral nga ren ako ng mga ganito.. Tnx James, lufet ka tlga :)
  14. darelski16

    darelski16 Leecher

    Joined:
    Nov 22, 2012
    Messages:
    13
    Likes:
    2
    Trophies:
    14
    Best Answers:
    0
    Gender:
    Male
    Location:
    Quezon City, Philippines
    gumagana pa ba ngayon 2 ?
  15. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    ou naman
  16. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
  17. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    Windows 8 VPN Get Connected


    The VPN client in Windows 8, like the operating system itself, has been optimized for touch devices. This optimization makes creating a VPN connection, and connecting to corporate networks, faster and easier. The VPN connection icon now appears in View Available Networks, along with other network connections. Creating a VPN profile requires only the server information. Windows auto-discovers authentication methods and tunnels while connecting, making the VPN experience seamless.
    The following sections describe how to set up and edit VPN connections using Windows 8:
    • Creating a new VPN connection

    • Connecting to a corporate network using an existing VPN Connection

    • Editing connection properties

    • Deleting a connection
    Creating a new VPN connection


    In Windows 8 you can use the Get Connected Wizard to create a VPN profile. To launch the wizard, type vpn in Settings, and then click Set up a virtual private network (VPN) connection.
    [​IMG]
    Figure 1: Launch the Get Connected Wizard
    In the wizard, you will provide the internet address of the Remote Access VPN server to which you will connect, and a name for the new connection. You can use an IP address or the fully qualified domain name of the Remote Access server. If you have a computer running Windows 8 with VPN already configured, you can view the server settings by viewing the connection properties, as shown in Figure 8. The destination name is the text that will be used for the VPN connection name (profile name), as shown in Figure 2. Note that you can click Remember Credentials which saves your credentials on the first successful connection attempt. This creates a new Discovery Profile which the client can use to connect to VPN.
    [​IMG]
    Figure 2: Get Connected Wizard Screen 1
    Discovery Profile


    Figure 2 shows the only information needed to create a VPN profile. Authentication and tunneling protocols are negotiated and configured during the first successful connection attempt for username/password based VPN deployments. Once these protocols are negotiated, you can edit these settings in Connection Properties.

    Connecting to a corporate network using an existing VPN connection


    To connect with an existing VPN connection


    1. Open Charms by moving the cursor to the top or bottom right corner of your computer screen. It can also be accessed by using the Win+C hotkey.
      [​IMG]
      Figure 3: Charms Bar
    2. Click Settings and then click the network icon displayed in the right-hand corner of the screen, as in Figure 4 below.
      [​IMG]
      Figure 4: Network icon location
    3. In Networks click the VPN connection that you want to use and then click Connect.
      [​IMG]
      Figure 5: Connect to VPN
    Once you click Connect, a new connection is negotiated with the server using the saved credentials. If you have not previously checked Remember Credentials while creating the connection, you will be asked to provide credentials.
    [​IMG]
    Figure 6: Specify VPN connection credentials
    When you select Remember my credentials while creating your connection, you won’t be asked for the credentials in further connection attempts. You can clear the cached credentials by right-clicking the connection and selecting Clear Cached Credentials, as shown in the following figure.
    [​IMG]
    Figure 7: Clear cached credentials

    Editing connection properties


    You can edit a connection that you have already configured by right-clicking the connection and then selecting Connection Properties.
    Connection Properties has four tabs described below. You can access Connection Properties by clicking View Connection Properties in Networks.
    [​IMG][​IMG]
    Figure 8: Connection Properties
    Connection Properties Tabs:
    1. General – Change the VPN server hostname or IP address. Additionally, configure an interface to public network.

    2. Options – Configure PPP Settings and enable/disable caching of credentials.

    3. Security – Configure tunnels, authentication, and encryption settings.

    4. Networking – Configure transports (or protocols). The most common protocols are TCP/IPv4 and TCP/IPv6.

    Deleting a connection


    In the Start screen, click Search in Charms, type vpn and then click View Network Connectionsunder Settings.
    [​IMG]
    Figure 9: View Network Connections
    Right-click a VPN connection and then click Delete, as in Figure 10 below:
    [​IMG]
  18. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    VPN - Connection Guide For Windows 8


    This article explains how to install and use cVPN, the University of Chicago secure VPN, on a computer running Windows 8 Enterprise.

    Windows 8 VPN Connection Guide

    The first time you use the VPN, you must be logged into an admin account. If you do not have administrative rights on your computer you will not be able to dØwnlØad the software. Also, we recommend that you have the latest version of Java on your computer before installing the VPN. You can find out if you have the latest version and dØwnlØad a new version at Please or Register to view links.
    Important Note:

    This Cisco AnyConnect program that is installed on a system running Windows 8 Professional will not work on the wireless networks due to a known Microsoft bug.
    USING THE VPN FOR THE FIRST TIME

      1. From the Windows 8 Start screen, open a web browser by clicking on the program icon, or selecting it from the Desktop.
        [​IMG]

      1. Point your browser to Please or Register to view links. We highly recommend using Firefox rather than Explorer as your browser.
        [​IMG]

      1. Save the file and double-click to run the install program.
        [​IMG]

      1. Click Next on the welcome screen.
        [​IMG]

      1. Select the I accept radio button regarding the End-User License Agreement, then click Next.
        [​IMG]

      1. Click Install to begin the installation.
        [​IMG]

      1. Choose Yes if a dialog box appears asking permission to allow the program in install.
      2. Select Finish to exit the Setup Wizard.
        [​IMG]
  19. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
      1. Click the lower left corner of the screen to return to the Start screen.
      2. Select the Cisco AnyConnect icon on the Start screen.
        [​IMG]

      1. Enter cvpn.uchicago.edu in the text field, then Connect.
        [​IMG]

      1. Log in with your CNetID and Password, then press OK.
        [​IMG]

      1. Press Accept.
        [​IMG]

      1. The Cisco AnyConnect VPN Client will be connected. To see details of the VPN connection, click the gear icon.
        [​IMG]

    1. To disconnect from the VPN, right-click the Cisco AnyConnect icon and select VPN Disconnect.
      [​IMG]
    Subsequent times that you use the VPN:
      1. From the Windows 8 Start screen, select the Cisco AnyConnect Icon.
        [​IMG]

      1. Press Connect.
        [​IMG]

      1. Log in with your CNetID and Password, then press OK.
        [​IMG]

    1. Press Accept.
      [​IMG] display in the notification area (previously known as the system tray).
  20. jamesiswizard_1

    jamesiswizard_1 Forum Guru

    Joined:
    Aug 26, 2012
    Messages:
    5,243
    Likes:
    13,804
    Trophies:
    301
    Best Answers:
    3
    Occupation:
    Tambay
    Setting up your VPN access on Windows 8

    [​IMG]
    PPTP Setup
    We recommend you use PPTP if you do not wish to install OpenVPN or have any stability issues on L2TP.


    L2TP Setup
    L2TP with IPsec is not always the most stable connection on Windows 7 systems so not the recommened connection type.


    [​IMG]VPNUK recommends connections over OpenVPN when using Windows 8.
    Please or Register to view links to dØwnlØad our OpenVPN Assistant, this all in one application will assist you with all OpenVPN tasks including installation and configuration..
    Using the version of OpenVPN listed on our website does not require the OpenVPN config files. We have created a pre-configured version of OpenVPN with the config files already built into the application. If you are using a previously installed or more recent version of OpenVPN you will need to copy the VPNUK OpenVPN config Files to the OpenVPN config folder on your PC, you can dØwnlØad the VPNUK config files for use with OpenVPN from HERE.


    [​IMG]VPNUK Connection Assistant Software.
    We have developed our own pre-configured, self updating Connection Software for all 32 and 64 bit Windows versions for connections over PPTP and L2TP/IPSec. Our software is very small in size and takes just a few clicks to setup and configure. In order to setup the software just enter your login details and choose your server from the availability list. Please or Register to view links to dØwnlØad the VPNUK Connection Assistant software.


    Note: If you are unsure of which type of VPN connection to setup on your computer or device we recommend you try each of the available connections. Individual systems will treat each type of connection differently, where one computer will prefer a connection over L2TP another may well prefer the connection to be used over PPTP. One type of connection will nearly always perform better than the other(s), its best to try them all so you are absoloutely sure you are getting the best out of our servers.

    [​IMG]The VPNUK Smart DNS service is a brilliant way to access certain web sites and services including streaming media and social networking services. The VPNUK Smart DNS services works on virtually every kind of system or device, this includes Smart TV's and Games Consoles! You can now bypass the need to log in or even create a VPN connection. In order to connect to the VPNUK Smart DNS service you only have to to make one small edit to the connection settings of the system or device you would like to connect.
Similar Threads
Forum Title Date
PC Free Internet Tricks saferVPN easy to create account ... Apr 15, 2014
PC Free Internet Tricks SaferVPN Accounts Giveaway Apr 14, 2014
PC Internet Tricks Help & Support SaferVPN Apr 13, 2014
PC Free Internet Tricks jamesiswizard_1 Cproxy + VPN Or HSS = Unlimited NET (Best For FBT/UBT Users) Apr 11, 2014
PC Free Internet Tricks MyCreator all versions now work w/out ultrasurf/proxies/vpn | Latest Update: April 16, 2014-4:40PM Apr 9, 2014

: vpn

Share This Page