What's new

PLDT ROUTER FULL ADMIN ACCESS (RP2631)

markz235

Addict
Joined
Dec 22, 2015
Posts
11
Reaction
35
Points
72
Device Model: AN5506-04-FA
Firmware: RP2631

How to get PLDT full admin access:

STEP 1 Go to your browser and type: http://192.168.1.1/fh

STEP 2 login with this credentials to enable telnet:
Username: f~i!b@e#r$h%o^m*esuperadmin
Password: s(f)u_h+g|u

STEP 3 Select Debug Switch

STEP 4 enable Telnet Switch and Web Admin Switch, and click Apply.

STEP 4B You should enable Telnet in Windows.
Here's a tutorial video on how to do it: https://www.YøùTùbé.com/watch?v=6Z1hG...

STEP 5 Open Command Prompt (Windows),
or Open Terminal (Mac),
or Use Putty

STEP 6 (type the command below)
telnet 192.168.1.1

STEP 7 login with this credentials on Command Prompt/Terminal/Putty:
Login: gepon
Password: gepon

STEP 8
Then type: enable
a password prompt will show up and use this credential:
Password: gepon

STEP 9 after logging in type: cd web

STEP 10 then type: get web admin username adminpldt
(then it show you the password for the adminpldt, copy it or remember it!)

STEP 11 go to your browser and type https://192.168.1.1/fh
(NOTICE: NOT ONLY "192.168.1.1/fh"!! Always put "https://" also not "http://"(but it will redirect you to https but it still different.))

STEP 12 then login your adminpldt and the password displayed in the telnet/CL
 
Device Model: AN5506-04-FA
Firmware: RP2631

How to get PLDT full admin access:

STEP 1 Go to your browser and type: You do not have permission to view the full content of this post. Log in or register now.

STEP 2 login with this credentials to enable telnet:
Username: f~i!b@eYou do not have permission to view the full content of this post. Log in or register now.$h%o^m*esuperadmin
Password: s(f)u_h+g|u

STEP 3 Select Debug Switch

STEP 4 enable Telnet Switch and Web Admin Switch, and click Apply.

STEP 4B You should enable Telnet in Windows.
Here's a tutorial video on how to do it: You do not have permission to view the full content of this post. Log in or register now.

STEP 5 Open Command Prompt (Windows),
or Open Terminal (Mac),
or Use Putty

STEP 6 (type the command below)
telnet 192.168.1.1

STEP 7 login with this credentials on Command Prompt/Terminal/Putty:
Login: gepon
Password: gepon

STEP 8
Then type: enable
a password prompt will show up and use this credential:
Password: gepon

STEP 9 after logging in type: cd web

STEP 10 then type: get web admin username adminpldt
(then it show you the password for the adminpldt, copy it or remember it!)

STEP 11 go to your browser and type You do not have permission to view the full content of this post. Log in or register now.
(NOTICE: NOT ONLY "192.168.1.1/fh"!! Always put "https://" also not "http://"(but it will redirect you to https but it still different.))

STEP 12 then login your adminpldt and the password displayed in the telnet/CL
thanks paps nka admin na yung PLDT AN5506-04-FA
100% working
 

Attachments

di ko ma gets eto sir. ano difference pag my admin access.?

eto ba yung kunwari connected ka na sa wifi tapos maglogin ng username pass before gumamit?
 
paano to, hindi ako maka connect sa host
1566924484331.png

ty sa sasagot :>
 

Attachments

following this post po.
sakin wrong password ung gepon
bali ang tinatype ko,
user : gepon
pass: gepon

kaso wrong pass daw po.


gepon.md.jpg
 

Attachments

Back
Top