Closed Simple Trick for PC no monitor signal/black screen

[Internet Explorer Chan]

Mukang wala akong nakikita TUT about PC trouble shooting e

Basic Tuturial to sa may mga pc na walang signal sa monitor
or ayaw umandar ng PC nyo kahit naka on na yung LED light ng PC.

STEPS:
1. Force Power off muna or bunot lahat ng naka saksak sa pc(keybord, mouse, power cord, VGA, etc. for safety)
2. Mag Hanap ka ng area na hindi istorbo o mahulog yang PC mo, pero kung ok naman OPEN COVER nalang
3. Hanapin mo yung RAM/Memorycard/DIMM kung anu man tawag mo dyan.
4. Alisin sa slot lahat at linisan yung mga kulay gold gamit pencel eraser.
Kung wala pwede din yung tshirt mo basta cotton(pero maawa ka sa nag lalaba sa inyo), hinay2 lang baka lalong ma sira.

NOTE:
a.)saksak mo muna 1 RAM lang.
b.)Kung 2 or more, saksak mo muna isa, power on PC . Kung may DISPLAY na ok pa yang ram, then POWER OFF(long press power button or UNPLUG POWER CORD).
c.)Next RAM saksak ulit . power on PC ,same process kung 2 or more RAM.

TIP 1: minsan kasi may 1 or more na sirang RAM o minsan din may mga sirang RAM SLOT kaya kung ayaw na mag boot yung pc mo sa isa mo pang RAM slot e salpak.
TIP 2: Kung ayaw padin try mong linisan ulit.
TIP 3: Kung wala talaga. wag munang ipagpatuloy. Technician na hinahanap ng pc mo.

5. Kung ok na lahat POWER plug. Press power ON.


KUNG GUMANA GOOD LUCK! POOOWAAAAAAR!

 

[goyynb]

Ok to ah...... Slamat sa tut paps...

 

[Internet Explorer Chan]

Ok to ah...... Slamat sa tut paps...

baka in the furure magka problema yang pc mo. take note mo na ahahah

 

[goyynb]

baka in the furure magka problema yang pc mo. take note mo na ahahah

Noted napo... na paste ko nah sa memo at na backup na sa dropbox ko.... kinekeep ko agad mga important na mga bagay²...

 

[Jmrie_]

ibookmark ko ito sana may next tutorial ka pa na ganto rin para mas mabilis maunawan

 

[Jebby1287]

Salamat dito paps

 

[Internet Explorer Chan]

Noted napo... na paste ko nah sa memo at na backup na sa dropbox ko.... kinekeep ko agad mga important na mga bagay²...

ibookmark ko ito sana may next tutorial ka pa na ganto rin para mas mabilis maunawan

Salamat dito paps

sige mga paps. salamat din.

 

[Bandirgas101]

That's really sounds like a plan, but you really need to check monitor as well for all that doings, that's for sure. I do understand that it's not common here, but you for example may set something in monitor to work via HDMI, but it connected to VGA or visa versa.

 

[Internet Explorer Chan]

That's really sounds like a plan, but you really need to check monitor as well for all that doings, that's for sure. I do understand that it's not common here, but you for example may set something in monitor to work via HDMI, but it connected to VGA or visa versa.

Yaa! I forgot something about on monitor. theirs a time monitor is not really that working without knowing it. My tuturial is common problem here . i just give a little tut. about what you talking thats will be another topic. and thanks for the tips!

 

[PHC-Giknows]

Try to run diagnostics kung anu ung sira like lenovo may dlc at lsc sa e2b, pwede mo malaman kung ram, hdd or mobo yung sira. Last is replacement ng parts thats all thank you

 

[Internet Explorer Chan]

Try to run diagnostics kung anu ung sira like lenovo may dlc at lsc sa e2b, pwede mo malaman kung ram, hdd or mobo yung sira. Last is replacement ng parts thats all thank you

nice tips paps!

 

[Nontikweed]

salamat sa tut

 

[PHC-Giknows]

nice tips paps!

Welcome

 

[Jingyar77]

Salamat sa tut

 

[Kurikung]

Salamat sa tut. pabookmark nito

 

[Internet Explorer Chan]

Salamat sa tut. pabookmark nito

oo papsi. salamat.

 

[Kalasag69]

Mukang wala akong nakikita TUT about PC trouble shooting e

Basic Tuturial to sa may mga pc na walang signal sa monitor
or ayaw umandar ng PC nyo kahit naka on na yung LED light ng PC.

STEPS:
1. Force Power off muna or bunot lahat ng naka saksak sa pc(keybord, mouse, power cord, VGA, etc. for safety)
2. Mag Hanap ka ng area na hindi istorbo o mahulog yang PC mo, pero kung ok naman OPEN COVER nalang
3. Hanapin mo yung RAM/Memorycard/DIMM kung anu man tawag mo dyan.
4. Alisin sa slot lahat at linisan yung mga kulay gold gamit pencel eraser.
Kung wala pwede din yung tshirt mo basta cotton(pero maawa ka sa nag lalaba sa inyo), hinay2 lang baka lalong ma sira.

NOTE:
a.)saksak mo muna 1 RAM lang.
b.)Kung 2 or more, saksak mo muna isa, power on PC . Kung may DISPLAY na ok pa yang ram, then POWER OFF(long press power button or UNPLUG POWER CORD).
c.)Next RAM saksak ulit . power on PC ,same process kung 2 or more RAM.

TIP 1: minsan kasi may 1 or more na sirang RAM o minsan din may mga sirang RAM SLOT kaya kung ayaw na mag boot yung pc mo sa isa mo pang RAM slot e salpak.
TIP 2: Kung ayaw padin try mong linisan ulit.
TIP 3: Kung wala talaga. wag munang ipagpatuloy. Technician na hinahanap ng pc mo.

5. Kung ok na lahat POWER plug. Press power ON.


KUNG GUMANA GOOD LUCK! POOOWAAAAAAR!

Salamat ng marami

 

[DaisukiAtom]

salamat may natutunan ako more post sir ^^ about sa troubleshooting ^^