What's new

Closed Android battery level stock on 50%

Status
Not open for further replies.

Ellyboy

Honorary Poster
Hi po mga ka ph tanong ko lang if naranasan niyo ung phone niyo na ang battery level ay na stock sa 50% ung akin kasi ganun so di ko alam if pa lowbat na sya or full na pgnachacharge. Any tools pra ma fix ung prob ko.

salamat po and godbless.
 
opo rooted phone ko.

Calibrate battery.
  1. Run down your device's battery until it turns itself off
  2. Turn it back on and wait for it to turn off again; this may be straight away of after a few minutes
  3. Remove the battery for at least 20 seconds
  4. Replace the battery and charge until full and then for at least another hour - while the device is off
  5. Delete you batterystats.bin file using one of 3 methods (requires root): Terminal Emulator - type su then press enter, next type 'rm /data/system/batterystats.bin' (without quotes). Using a Battery Calibration App (from market) - there are many choices available, they just delete your batterystats.bin file. In market, search for battery calibration. Make sure to read review and provided info in case of device incompatibilities. Manually - if for any reason the previous two methods didn't work you may want to try deleting the file manually. Using a file manager with root access (such as Root Explorer) navigate to 'data/system/batterystats.bin'. Delete 'batterystats.bin'
  6. Your device will now creates itself a new batterystats.bin file with a correct 100% battery reading.
  7. Run down the battery until it turns itself off
  8. Turn on the device and charge for at least 8 hours
  9. Unplug the device, turn off and charge for another hour
  10. Unplug the device, turn on and wait for 2 minutes
  11. Turn off and charge for another hour
  12. Use the device as normal!
You really only need to do this very few months or when you change ROM. Providing you don'd change any major settings the battery stats file will remain accurate.

Note:
This may not always produce results because your battery stats file may not be affected at all.

You do not have permission to view the full content of this post. Log in or register now.
 
Calibrate battery.
  1. Run down your device's battery until it turns itself off
  2. Turn it back on and wait for it to turn off again; this may be straight away of after a few minutes
  3. Remove the battery for at least 20 seconds
  4. Replace the battery and charge until full and then for at least another hour - while the device is off
  5. Delete you batterystats.bin file using one of 3 methods (requires root): Terminal Emulator - type su then press enter, next type 'rm /data/system/batterystats.bin' (without quotes). Using a Battery Calibration App (from market) - there are many choices available, they just delete your batterystats.bin file. In market, search for battery calibration. Make sure to read review and provided info in case of device incompatibilities. Manually - if for any reason the previous two methods didn't work you may want to try deleting the file manually. Using a file manager with root access (such as Root Explorer) navigate to 'data/system/batterystats.bin'. Delete 'batterystats.bin'
  6. Your device will now creates itself a new batterystats.bin file with a correct 100% battery reading.
  7. Run down the battery until it turns itself off
  8. Turn on the device and charge for at least 8 hours
  9. Unplug the device, turn off and charge for another hour
  10. Unplug the device, turn on and wait for 2 minutes
  11. Turn off and charge for another hour
  12. Use the device as normal!
You really only need to do this very few months or when you change ROM. Providing you don'd change any major settings the battery stats file will remain accurate.

Note:
This may not always produce results because your battery stats file may not be affected at all.

You do not have permission to view the full content of this post. Log in or register now.
salamat paps godbless
 
Status
Not open for further replies.
Back
Top