What's new

Closed B315s-936 tattoo level unlock

Status
Not open for further replies.
Joined
May 24, 2018
Posts
101
Reaction
17
Points
80
Age
42
CfDfTwk.jpg

How To Unlock Easily

BASA MODE Muna
Ito na Po ung Pinaka-Madaling Paraan Para Ma-Unlock ang 936 na Totto Level
Muka lang mahaba kasi naka Include dito ang mga Picture at kung papaano Mapa-USB MODE ang MODEM
Para Mapa-connect sa PC . USB to USB
At Di binubuksan ang Unit Marami na nag kalat jan na Procedure
Na sayo parin kung saan ka hiyang :)

I hope na di lalabas ito sa iba

Para sa Mga Newbie na Katulad ko

Follow This
Tool
-LAN CABLE
-USB CABLE MALE TO MALE

you need download this file..
You do not have permission to view the full content of this post. Log in or register now.


Ok Game kna ba?

PREPARING USB MODE ( GREEN LIGHT ) sa USB PARA MA-UNLOCK at MA-FULL ADMIN
Paano ?

Follow This

1. Open B593s-22_Multicast_upgrade_tool
Follow The Image


2. Plug LAN CABLE , Plug POWER ADAPTOR

Flashing Color indicator
Coding For Identify Mode

1
Red


2
Blue

Wait Flashing 60 Seconds
Mag Re-restart Yan

3
Blue


4
Red

Press Power + WPS
For 10 Seconds

5
Blue Wait Flashing 60 Seconds Again


6
Restart na sa Green
Close muna si B593s-22_Multicast_upgrade_tool

Means USB MODE na :D


7. Install Driver FC_Serial_Driver_Setup

8. Connect USB Male to Male
Green


9. Open CID Reader
Check Comport dapat parehas sa CID Reader
Port - Huawei mobile connect - 3G PC UI Interface

Send This
at ^ nvwrex = 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0

(this code will permanently unlock your modem)




Send This
AT^SFM=1

(this code will enter your modem into factory mode, preparation for admin mode)




Send This
AT^RESET

(modem will reboot after sending this code)



After That Remove USB
Remove Adaptor

Repeat Flashing


2. Plug LAN CABLE , Plug POWER ADAPTOR
Flashing 60/sec
Wait mo lang Hanggang Mag Automatic Green Color na yan no need Press anything
( USB MODE )


Close B593s-22_Multicast_upgrade_tool

8. Connect USB Male to Male
9. Open CID Reader
Check Comport dapat parehas sa CID Reader


Send This

AT^SFM=0
(this code will exit your modem into factory mode)



Send This
AT^RESET

(modem will reboot after sending this code)


Remove USB / Remove Adaptor
Insert Smart / Sun Sim etc.

Then Plug LAN Cable / Adaptor
Go To Address bar In your browser
Dial Telnet 192.168.8.1



Done. . .

Isda kayo jan :D

Thanks For Viewing
For Reference Purposes

Open For Comment and Question's
 

Attachments

Status
Not open for further replies.
Back
Top