What's new

Globe youwin m022 openline (100% successful)

_ALPHA_

Forum Veteran
Joined
Mar 14, 2017
Posts
1,264
Reaction
2,556
Points
618
Please carefully follow steps to successfully open-line your GLOBE YOUWIN M022!
:)) TRY at your own risk! :))

Things needed:

***DISABLE ANTI-VIRUS***


Flashing GLOBE YOUWIN M022 LTE MIFI:

***DISABLE ANTI-VIRUS***

1. Install WTPTP Driver (Optional) to avoid errors.
2. List down the EMEI, S/N, and MAC of target MIFI (YOUWIN M022).
3. Disconnect the MIFI device from your computer, remove battery and sim card.
4. Extract “Openline Globe M022.rar”.
5. Run “SWDownloader.exe” as Administrator.
6. On SWDownloader Interface, Select File > Open > SWD > and select the file “Smart_dashboard_for_Globe_YOUWIN_M022.blf”.
7. Make sure all checkbox is checked.
8. Click the green bulb.
9. Using your USB cable, connect your MIFI device (with battery removed) on the computer, a process should start from the SWDownloader.
10. Wait until the flashing is done and disconnect it from the USB cable.
11. Insert the battery and other telecom sim card (preferably SMART sim to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
12. Turn on your device and hook it up to your PC using your USB Cable.
13. Run your Device Manager on your PC (Windows)
14. Extract “20121130_V5_LTE_MIFI_Generic_Driver.rar”.
15. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted.
16. Extract “MIFITOOL1.0.0.3.exe”.
17. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
18. Select the COM port number which the Marvell “AT Interface” is connected.
19. Input your device’s info which you have listed down earlier, do not click any button yet.
20. Follow the numbering to be clicked and wait, start from 1:
You do not have permission to view the full content of this post. Log in or register now.
21. If successful in each Info write, the app will display a light green Chinese Character.
22. Close “MIFITOOL1.0.0.3.exe”.
23. Reboot your MIFI device and Connect.
24. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
25. Click “PN Required” and enter the MEP CODE “123456”.
26. Wait until the device is already receiving signal.
27. It should be fully openlined.
28. REDO if errors are encountered.
Features:
• Fully Openlined Firmware
• LED Lights Working (LED auto-off feature – does not affect MIFI functionality)

Rewritten by KIMAT (ComputerAngel)…

 

Attachments

Last edited by a moderator:

Similar threads

Back
Top