Unawain at intindihin häçk wifi kung ma change pass pa ang password siya
The First Option Make Sure Nakakonek Ka Or Binayaran Mo Or Nahäçk Mo Using Methods Below
Default password lang po ng (PROLINK_H5004NK, PLDTHOMEDSL, PLDTMyDSL, HomeBro_ULTERA, PLDTHOMEFibr) ang pwedeng e häçk in default.
Kung pano gawin, sundan nyo lang po instructions ko sa baba ⬇⬇⬇
NOTE: All caps po yung password. But sometimes some WIFI meron din no caps so take note.
Remember: Use any app that can see Mac Address.
HomeBro_ULTERA + last 6 mac character
Password: HomeBro_ABB8CC
PLDTMyDSL + last 5 mac character
Password: PLDTWIFI73FG6
PLDTHOMEDSL+ last 5 mac character
Password: PLDTWIFI8AF3F
myBROWIFI + last 5 mac character
Password: myBROWIFI5C4C9
PROLINK_H5004NK_74FU7 + front 3 mac character + last 3 mac character + between wifi
Password: 674WIFIFU7
PLDTHOMEFibr
TAKE NOTE THIS HEX CODE/MAC TABLE
0=f
1=e
2=d
3=c
4=b
5=a
6=9
7=8
8=7
9=6
c=3
d=2
e=1
f=0
SAMPLE :
You Scan SSID like PLDTFIBR_c5c4c9, c5c4c9 is base on your router WiFi last 6 MAC Address , PLDT firmware auto convert this as DEFAULT WiFi password. On old Firmware we need only last 5 mac
Use the code above to ***** the password
[ wlan + "generated Mac address" ]
c = 3
5 = a
c = 3
4 = b
c = 3
9 = 6
So you get 3a3b36 outcome will be wlan3a3b36 [ wlan + "generated Mac address" ]
Default WiFi Password: wlan3a3b36
The Second Option If Password Was Change Pass Make Sure Have Wps In Router
Mak_e sure you know the router companies then go to link below find the username & password.
You do not have permission to view the full content of this post. Log in or register now.
Then if you know na pass then find the wps pin entry in the admin. Then copy the pin entry. Then if the user change the password then use (WPS CONNECT, WPA WPS ρrémíùm, ETC) then connect and paste the pin entry make sure that the WIFI have WPS .
The First Option Make Sure Nakakonek Ka Or Binayaran Mo Or Nahäçk Mo Using Methods Below
Default password lang po ng (PROLINK_H5004NK, PLDTHOMEDSL, PLDTMyDSL, HomeBro_ULTERA, PLDTHOMEFibr) ang pwedeng e häçk in default.
Kung pano gawin, sundan nyo lang po instructions ko sa baba ⬇⬇⬇
NOTE: All caps po yung password. But sometimes some WIFI meron din no caps so take note.
Remember: Use any app that can see Mac Address.
HomeBro_ULTERA + last 6 mac character
Password: HomeBro_ABB8CC
PLDTMyDSL + last 5 mac character
Password: PLDTWIFI73FG6
PLDTHOMEDSL+ last 5 mac character
Password: PLDTWIFI8AF3F
myBROWIFI + last 5 mac character
Password: myBROWIFI5C4C9
PROLINK_H5004NK_74FU7 + front 3 mac character + last 3 mac character + between wifi
Password: 674WIFIFU7
PLDTHOMEFibr
TAKE NOTE THIS HEX CODE/MAC TABLE
0=f
1=e
2=d
3=c
4=b
5=a
6=9
7=8
8=7
9=6
c=3
d=2
e=1
f=0
SAMPLE :
You Scan SSID like PLDTFIBR_c5c4c9, c5c4c9 is base on your router WiFi last 6 MAC Address , PLDT firmware auto convert this as DEFAULT WiFi password. On old Firmware we need only last 5 mac
Use the code above to ***** the password
[ wlan + "generated Mac address" ]
c = 3
5 = a
c = 3
4 = b
c = 3
9 = 6
So you get 3a3b36 outcome will be wlan3a3b36 [ wlan + "generated Mac address" ]
Default WiFi Password: wlan3a3b36
The Second Option If Password Was Change Pass Make Sure Have Wps In Router
Mak_e sure you know the router companies then go to link below find the username & password.
You do not have permission to view the full content of this post. Log in or register now.
Then if you know na pass then find the wps pin entry in the admin. Then copy the pin entry. Then if the user change the password then use (WPS CONNECT, WPA WPS ρrémíùm, ETC) then connect and paste the pin entry make sure that the WIFI have WPS .
