MusicLover07
Forum Veteran
- Joined
- May 18, 2017
- Posts
- 361
- Reaction
- 3,941
- Points
- 536
SOFTETHER MANUAL FIXING, 50% PROBABILITY WORKING PERO DEPENDE PA DIN SA ERROR.
NOTE: PWEDE TO KAHIT NA ANONG VPN BASTA PANG PC LANG
PROCEDURE:
VPN Client Driver Error: Solution 1
In order to resolve this error, complete this procedure to manually set the AnyConnect VPN agent to Interactive:
VPN Client Driver Error: Solution 2
Complete these steps in order to resolve the problem:
SANA MAKATULONG SA INYO GUYS, DONT FORGET TO LIKE AND FEEDBACK
NOTE: PWEDE TO KAHIT NA ANONG VPN BASTA PANG PC LANG
PROCEDURE:
VPN Client Driver Error: Solution 1
In order to resolve this error, complete this procedure to manually set the AnyConnect VPN agent to Interactive:
- Right click on Computer > Manage > Services and Applications > Services. Right-click Cisco AnyConnect Secure Mobility Agent, and left-click Properties.
- Click the Log On tab and check the box Allow service to interact with the desktop. This sets the registry Type value DWORD to 110 (default is 010) for the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnagent
Note: If this is to be used, then the preference would be to use the .MST transform in this instance. This is because setting this manually using the following methods requires that this be set after every install/upgrade process. Therefore, the need to identify the application that is causing this.
VPN Client Driver Error: Solution 2
Complete these steps in order to resolve the problem:
- Open a command prompt as an Administrator on the PC.
- Run net stop CryptSvc
- Run esentutl /p %systemroot%\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb
- When prompted, choose OK to attempt the repair.
- Exit the command prompt.
- Reboot.
SANA MAKATULONG SA INYO GUYS, DONT FORGET TO LIKE AND FEEDBACK
Last edited: