Closed Mga android expert/ flasher/ programmer/ technicians ect. pa help naman po

[DarKKirA]

Mga android expert/ flasher/ programmer/ technicians etc. pa help naman po. Mga lodi pa tulong naman po di na talaga kaya.


Yang nasa pic po yan po lumalabas pag nag dadail ako ng kahit ano.

Nasa pictures po parang naka airpalane mode sya parati tapos ang sabi naman about sa notification NO SIM DETECTED. Ang unit po ng phone ko ay cherry mobile s3 octa at rooted po ito matagal na mga 3years. trinay ko na pong mag reflash, gamit ang recovery mode ng cp ko CWM at trinay ko rin mag mag flash gamit ang flash toll yong pc ang gagamitin. Then about naman sa IMEI trinay ko na rin e recover ang original gamit ang IMEI.exe at command prompt. Nag try na rin ung sa cp lang ang gamit ung application na pwede mag change IMEI pero ayaw parin. Sinalpakan ko na rin ng bagong sim to pero ganon parin at trinay ko ung mga sim sa ibang cp pero good condition naman. sa cp ko talaga ang may problema. pano to mga lodi?? sana ay matulongan nyo po ako.

 

[cjmaravilla]

damaged rom siguro nagamit mo pag flash niyan, ginamit mo ba yung original firmware para diyan?

 

[jrklab]

stock firmware ang gamitin mo sa pag flash paps..tapos kung walang IMEI pagkatapos..meron din tut dito kung paano ang paglagay ng orig imei..unahin mo muna yung pag flash ng orig firmware..sana makatulong

 

[DarKKirA]

damaged rom siguro nagamit mo pag flash niyan, ginamit mo ba yung original firmware para diyan?

paps di ko alam kung san makaka hanap ng original firmware nito paps eh pero ung gamit ko
flare s3 octa wich is yun ung tunay na unit ng cp ko matagal ko na tong gamit pero wala naman problema maraming bisis na akung nag change ng rom pero ngaun lang to nangyari

pero tanong lang lodi alam mo kung san makakakoha ng original firmware nito?
pa link naman salamat

 

[DarKKirA]

stock firmware ang gamitin mo sa pag flash paps..tapos kung walang IMEI pagkatapos..meron din tut dito kung paano ang paglagay ng orig imei..unahin mo muna yung pag flash ng orig firmware..sana makatulong

isa din yang sa problema ko lodi eh marami kasing nakalatag jan na ang sabi original firware or stock firmware pero pag dinaowload mo may bugged parin itong gamit ko nga lang ung walang masyadong bugged kaso nagkaproblema na ngaun
pa link po ng stock firmware salamat or paki specifie ung tut nyo po thnx

 

[Shinsuke Nishizono]

Meron bang baseband version ng phone mo?

 

[DarKKirA]

Meron bang baseband version ng phone mo?

wala sir unknown

 

[DarKKirA]

Meron bang baseband version ng phone mo?

diba pag unknown ang baseband version sa IMEI yon?

 

[Wash]

simple dahil rooted ka big chance yan just download chamelpeon or what ever basta ganyan yung name problem solve na agad

 

[ced17]

mukang wala kang imei paps chamelophone gamitin mo rooted ka naman eh


check mo muna dial *#06#

eto yung tamang way ng pag restore ng imei

 

[Shinsuke Nishizono]

wala sir unknown

Then sira ng NVRAM niyan. Only legit na technician nagagawa kapag NVRAM ng sira.

Kailangan ng box para maayos.

 

[ced17]

⇒ Requirements

1. Rooted Android Phone.
2. You should know IMEI number of your device.

⇒ Get the IMEI Number

• Dial *#06# in the dialer.
• You Can also check for IMEI in About phone under Setting.
• You can also find IMEI in Box or somewhere on the battery.

Download and Install You do not have permission to view the full content of this post. Log in or register now.(Preferred) or You do not have permission to view the full content of this post. Log in or register now.

Steps to Follow to Recover Lost IMEI
⇒ Root Access required.

You do not have permission to view the full content of this post. Log in or register now.
Step. 1 In MTK Engineering Mode App select MTK settings.

Step. 2 Go to connectivity and select CDS information.

Step. 3 In CDS select Radio information.

Radio Information under CDS

Step. 4 Select Phone 1 and in input box enter AT+EGMR=1,7,”Your IMEI Number” and press Send AT Command. Now reboot the device.

IMEI Command

Step. 5 If you have a dual SIM device then again go to the MTK Engineering App and now select Phone 2 and enter the command AT+EMGR=1,10,”Your IMEI Number”, send command and reboot the device.

Related: Fix – Play Store “Error Retrieving Information From Server” [RH-01]
Step. 6 Once done you will see the network.

Note: If the command doesn’t work just simply put space after AT i.e AT +EMGR instead of AT+EMGR.

IMEI Command

 

[DarKKirA]

mukang wala kang imei paps chamelophone gamitin mo rooted ka naman eh


check mo muna dial *#06#

eto yung tamang way ng pag restore ng imei

na try ko na yan paps yang chamelephon ganun parin eh
tapos pag dinadial ko naman yang *#06# invalid IMEI

 

[DarKKirA]

Then sira ng NVRAM niyan. Only legit na technician nagagawa kapag NVRAM ng sira.

Kailangan ng box para maayos.

⇒ Requirements

1. Rooted Android Phone.
2. You should know IMEI number of your device.

⇒ Get the IMEI Number

• Dial *#06# in the dialer.
• You Can also check for IMEI in About phone under Setting.
• You can also find IMEI in Box or somewhere on the battery.

Download and Install You do not have permission to view the full content of this post. Log in or register now.(Preferred) or You do not have permission to view the full content of this post. Log in or register now.

Steps to Follow to Recover Lost IMEI
⇒ Root Access required.

You do not have permission to view the full content of this post. Log in or register now.
Step. 1 In MTK Engineering Mode App select MTK settings.

Step. 2 Go to connectivity and select CDS information.

Step. 3 In CDS select Radio information.

Radio Information under CDS

Step. 4 Select Phone 1 and in input box enter AT+EGMR=1,7,”Your IMEI Number” and press Send AT Command. Now reboot the device.

IMEI Command

Step. 5 If you have a dual SIM device then again go to the MTK Engineering App and now select Phone 2 and enter the command AT+EMGR=1,10,”Your IMEI Number”, send command and reboot the device.

Related: Fix – Play Store “Error Retrieving Information From Server” [RH-01]
Step. 6 Once done you will see the network.

Note: If the command doesn’t work just simply put space after AT i.e AT +EMGR instead of AT+EMGR.

IMEI Command

thnx sa pag sagot mga lodi pero nagawa ko na po yan ganun parin
salamat po sa tulong

 

[DarKKirA]

Sa lahat po ng tumolong salamat po ng marami na aayos ko na po ung phone ngayun lang triny kung mag flash ng ibang unit na rom tapos naging ok at flinash ko ulit sa stock rom un ok na sya salamat po sa lahat

 

[ced17]

You can fix invalid IMEI for Cherrymobile Flare S3 via PC

1. Download You do not have permission to view the full content of this post. Log in or register now.
2. Download and install You do not have permission to view the full content of this post. Log in or register now. for Cherrymobile Flare S3
   
3. Open MTKdroids Tools.
4. On your phone, enable USB debugging and connect your phone. Wait for successful detection.
5. At the lower right, click ROOT. You will notice a prompt message on your phone. Just accept it and wait for for the process.
6. Select NVRAM/IMEI button and maunually *********** two 15digits IMEI number found at the back of your phone. If you have back up file of the NVRAM, you can opt to restore button.
7. Select Ok/Apply.. Click Reboot and check for network or by dialing *#06# if the writting of IMEI succeded.
8. Done

You can also try Engineering Mode for CM FLARE S3

1. On your phone dialer press, *#*#3646633#*#*
2. Go to Connectivity and select CDS Information
3. Go to Radio Information
4. You will see submenu "Phone 1" and "Phone 2"
5. In each submenu insert this command line:
6. Phone 1 at + emgr = 1.7 "imei 1"
7. Phone 2 at + emgr = 1.10 "imei 2"
8. reboot. done

If you have rooted your Flare S3, install root explorer follow these procedures

1. Download and extract the You do not have permission to view the full content of this post. Log in or register now.
2. Put the exe file to C:\Users\Computername\
3. Open cmd command and type imei.exe imei1 imei2 and hit enter
4. Sample C:Users\Makeorbrick>imei.exe 123456789012345 098765432154321
5. At the same folder you will see that a new file was created namely "MP0B_001_NEW".
6. Right click on that file and hit rename. make it "MP0B_001"
7. Copy the MP0B_001 on your SD card.
8. Open Root Explorer(can be downloader at playstore and locate /data/nvram/md/NVRAM/NVD_IMEI
9. Delete the old MP0B_001 on that folder and paste the other one you have created
10. Long press on that file, click menu, click properties, select permissions.
11. Set Permission to rw-rw-rw--
12. Close Root explorer and Reboot.
13. Done.

thnx sa pag sagot mga lodi pero nagawa ko na po yan ganun parin
salamat po sa tulong

 

[ced17]

yan nagawa mo na ba yan

 

[DarKKirA]

SOLVE na po ang problem di ko pa alam kung pano to e close a tread salamat po ulit sa lahat

 

[DarKKirA]

yan nagawa mo na ba yan

ok na po lodi hehe salamat po