Noob_Killer09
Addict
- Joined
- Jan 21, 2018
- Posts
- 8
- Reaction
- 3
- Points
- 64
mportant notes:
· Your unit must be running in NOUGAT FIRMWARE
· Your unit must be SM-G570Y/DS
If you don’t have that two important notes, then do not proceed or else you’re your J5 Prime will become brick.
Uploaders Note: I am not responsible for any data lost or cause of damaged of your unit. DO AT YOUR OWN RISK!
TOOLS NEEDED:
ODIN3 V3.12.3 [You do not have permission to view the full content of this post. Log in or register now.]
J5 Prime USB Driver [You do not have permission to view the full content of this post. Log in or register now.]
Nougat SuperSU J5 Prime and J7 7.0 [You do not have permission to view the full content of this post. Log in or register now.]
Twrp Recovery J5 Prime & J7 Prime Nougat 7.0 [You do not have permission to view the full content of this post. Log in or register now.]
INSTRUCTION:
Make sure the SuperSU File is in SD CARD.
1. Enable OEM unlock first, how: Settings> About Device> Software Info> Build Number (click 7 times), return to Settings. Enter Developer Option Options, then check OEM unlock & USB debugging.
2. Turn Off Your Unit, Enter Odin Download Mode: Vol-Down + Home + Power and Press Volume+ once.
Plug Your Unit to PC / laptop, Open ODIN click AP / PDA, find the Twrp Recovery J5 Prime & J7 Prime Nougat 7.0.tar file you downloaded click START until there is writing PASS, remove your unit from PC / Laptop. Then your unit will automatically restart.
3. Turn off your unit and enter Recovery Mode
3.1 How to Enter to Recovery Mode: Vol-Up + Home + Power.
4. Swipe to Allow Modification and Choose Install > Choose Nougat SuperSU J5 Prime & J7 Prime 7.0.zip From SDCARD. then Swipe to confirm Flash.
5. After the Installing Proccess select Reboot then select System, Select Do Not Install.
Note: If theres some error in flashing please follow this steps, goto WIPE, then advance wipe, select/check data, then click Repair or Change File System, then select change file system. may anim na selection na lalabas dyan, select mo yung EXT2 then swipe to change, wait mo ma finish, then select mo naman yung EXT4 then swipe to change and there you go.
Choose Install > Choose Nougat SuperSU J5 Prime & J7 Prime 7.0.zip From SDCARD. then Swipe to confirm Flash.
Done... You Successfully Rooted Your J5 Prime ..
To check your root status, just download Root Checker in Playstore.
Thanks to Google and XDA
Tested by me..
· Your unit must be running in NOUGAT FIRMWARE
· Your unit must be SM-G570Y/DS
If you don’t have that two important notes, then do not proceed or else you’re your J5 Prime will become brick.
Uploaders Note: I am not responsible for any data lost or cause of damaged of your unit. DO AT YOUR OWN RISK!
TOOLS NEEDED:
ODIN3 V3.12.3 [You do not have permission to view the full content of this post. Log in or register now.]
J5 Prime USB Driver [You do not have permission to view the full content of this post. Log in or register now.]
Nougat SuperSU J5 Prime and J7 7.0 [You do not have permission to view the full content of this post. Log in or register now.]
Twrp Recovery J5 Prime & J7 Prime Nougat 7.0 [You do not have permission to view the full content of this post. Log in or register now.]
INSTRUCTION:
Make sure the SuperSU File is in SD CARD.
1. Enable OEM unlock first, how: Settings> About Device> Software Info> Build Number (click 7 times), return to Settings. Enter Developer Option Options, then check OEM unlock & USB debugging.
2. Turn Off Your Unit, Enter Odin Download Mode: Vol-Down + Home + Power and Press Volume+ once.
Plug Your Unit to PC / laptop, Open ODIN click AP / PDA, find the Twrp Recovery J5 Prime & J7 Prime Nougat 7.0.tar file you downloaded click START until there is writing PASS, remove your unit from PC / Laptop. Then your unit will automatically restart.
3. Turn off your unit and enter Recovery Mode
3.1 How to Enter to Recovery Mode: Vol-Up + Home + Power.
4. Swipe to Allow Modification and Choose Install > Choose Nougat SuperSU J5 Prime & J7 Prime 7.0.zip From SDCARD. then Swipe to confirm Flash.
5. After the Installing Proccess select Reboot then select System, Select Do Not Install.
Note: If theres some error in flashing please follow this steps, goto WIPE, then advance wipe, select/check data, then click Repair or Change File System, then select change file system. may anim na selection na lalabas dyan, select mo yung EXT2 then swipe to change, wait mo ma finish, then select mo naman yung EXT4 then swipe to change and there you go.
Choose Install > Choose Nougat SuperSU J5 Prime & J7 Prime 7.0.zip From SDCARD. then Swipe to confirm Flash.
Done... You Successfully Rooted Your J5 Prime ..
To check your root status, just download Root Checker in Playstore.
Thanks to Google and XDA
Tested by me..