Tutorial How to openline (unlock) and debrand huawei e5573cs-933 (globe)

[dheck89]

May nadownload akong latest firmware sa huawei, kaso di maunzip, ilang beses ko na dinownload ganun pa rin.

 

[razz1354]

Naka 3g boot na yan. Change PW na next to do

Step 10 pa po to. Ayaw mag run eh. Tapos sa 11 di pa lumalabas yung dalawa sa device manager.

 

[PHC THOR]

Sir pano po yun paulit ulit sa quick setup ng huawei?

 

[ellednarb666]

Nice TS
Nga pala, mukhang engineering ka ah?
Baka alam mo kung panu buhayin ung dead na pocket wifi? Na-short yta kasi Huawei E5377 ko

 

[alpitot]

Salamat paps sa detailed na tutorial. I have unlocked my modem na po. I'm currently abroad so I badly need my pocket wifi to be unlocked and it worked pretty well. Thank you. P.S. I didnt have to disassemble my modem kasi medyo visible at accessible naman yung metal part na iso-short out near the sim slot. I used a very thin conductice wire po na kasya dun sa may exposed open part under the battery. And it worked naman. Now I tested the modem using an NTT-DOCOMO sim and connection is working. Share lang po. Thank you. Your post was very helpful. I guess we just have to follow the step by step tutorial. Thank you po ulit.

 

[LAREX796]

GuyZ.....paki openline pls....Huawei E5573Cs-933

 

[supersandra20]

GuyZ.....paki openline pls....Huawei E5573Cs-933

sundin mo lang po tutorial.

 

[XyllaBear]

ung HXD file pano e DL ?

 

[byron092192]

Salamat paps sa detailed na tutorial. I have unlocked my modem na po. I'm currently abroad so I badly need my pocket wifi to be unlocked and it worked pretty well. Thank you. P.S. I didnt have to disassemble my modem kasi medyo visible at accessible naman yung metal part na iso-short out near the sim slot. I used a very thin conductice wire po na kasya dun sa may exposed open part under the battery. And it worked naman. Now I tested the modem using an NTT-DOCOMO sim and connection is working. Share lang po. Thank you. Your post was very helpful. I guess we just have to follow the step by step tutorial. Thank you po ulit.

Thanks Paps sa pagtip na hindi na need na i-diassemble ung modem, wala po ako kasi nung screwdriver besides di pa natanggal ung warranty sticker hehe. I used thin copper wire

 

[AkosiHeart01]

Thanks Paps sa pagtip na hindi na need na i-diassemble ung modem, wala po ako kasi nung screwdriver besides di pa natanggal ung warranty sticker hehe. I used thin copper wire

Wow iwas assemble din pala pwede Parang gusto ko na tuloy hehe

 

[elieboy123]

THANK YOU TS FIRST TIME KO MAG OPEN LINE PERO SUCCESSFUL GANDA NANG TUT MO SALAMAT PO ULIT TS

 

[Gurdian28]

anong code?? android lang gamit ko boss.. pano to ma openline ganyan din akin wifi

 

[Gurdian28]

thanks boss naunlocked ko na yung unit ko..

pano boss android lang din aq

 

[FritzT]

I have this Mifi device (E5573cs-933) that refused to work with the above method.After several tries I discovered that the unlock count is 0. The usb balong loader shows error when i try to load bin file. Is it possible to fix this? Thanks

 

[Adrianfernandez]

fanget Wala pa akong experience sa ZTE na pocket WiFi. Nung bumili kaso ako, wala pa silang LTE na router (nasa budget ko kung meron).

As far as a I know ang Balong ay Huawei lang dahil yun chipset ng Balong ay gawa ng Huawei.

Boss paturo nmn ako tagalog pm tayo boss

 

[mikemendoza]

same problem po tayo sir nakalimutan ko pass ng admin diko na tuloy mapalitan ng pass ung wifi sana may update panu mag hard reset..thanks in advance sana may makatulong

ganito din problema ko.. may nakaayos na ba? HUAWEI - 4050 ANg SSID.. DI KO MAPASOK.. yung gui.. di kasi ako maka konek.

 

[mikemendoza]

Eto mga napansin ko after maunlock/madebrand..

*Nabago default SSID (before: HUAWEI-DFF9, after: HUAWEI-4050)
*Nabago default Wifi key (unknown)
*Hindi na sya narereset (physical button or via dashboard)
*Nabago rin LAN MAC Address nya


Pwede pa ba maibalik stock firmware at webui nya? Exclusive lang kasi nakita kong firmware e. Ty

same problem ako. paano kaya ma konek eh di natin alam password. naka ilang reflash na ako. same problem.

 

[mikemendoza]

same problem ako. paano kaya ma konek eh di natin alam password. naka ilang reflash na ako. same problem.

ok na.. nakuha ko na. install mo pala ulit yung parang hi link nya na makikita sa internal drive ng modem. tapos dun mo na sya ma coconfigure. wew.

 

[razz1354]

Di pwede pala sa Windows 10. Kaya pala di maayos yung USB driver haha.

 

[newt21]

ganito din problema ko.. may nakaayos na ba? HUAWEI - 4050 ANg SSID.. DI KO MAPASOK.. yung gui.. di kasi ako maka konek.

reset mo..tapos try mo username:admin password:admin ayaw ba?