Tutorial Smart bro evoluzn fx pr2l unlocking/reviving (update 12/01/16)

[Argotron]

Smart Bro Evoluzn FX PR2/PR2L Unlocking/Reviving
[Update 12/01/16]



Difference of FX PR2 to FX PR2L

FX PR2 (W/ LED)




FX PR2L (W/ LCD)


What's New?

ReliableData.bin Updated. No need to enter MEP Pin after flashing and resetting (Totally Openlined Firmware)

Included FX PR2 Firmware

4G fix (reverted to Old Web UI due to User feedback)[Please leave a feedback]

================================================================


Download Links :

Firmwares :

You do not have permission to view the full content of this post. Log in or register now.

or

You do not have permission to view the full content of this post. Log in or register now.

Driver :

You do not have permission to view the full content of this post. Log in or register now.

Tools :

You do not have permission to view the full content of this post. Log in or register now.


================================================================

WARNING: THIS THREAD IS ONLY CONCERNED WITH PR2 AND PR2L FIRMWARES ONLY. IF YOU HAVE A DIFFERENT DEVICE AND HAVE IDENTIFIED ITS BOARD VERSION (MY2108), TRY FLASHING IT WITH AVAILABLE DIFFERENT FIRMWARE FROM OTHER TELCO, DOWNLOAD AND REPLACE THE RELIABLEDATA.BIN FROM THE FIRMWARES PROVIDED TO OPENLINE.

Credits to Sir You do not have permission to view the full content of this post. Log in or register now. for the original MIFI firmwares and tools. Thanks to totoymola11 for providing a working FX PR2 firmware.

You can help other Marvell MIFI users by sharing your working firmware in each respective model by posting it here. Or you can start experimenting with your own device with various Web UI by porting different firmwares but there is always risk in doing so, like totally bricking the device and stuff. Consider yourself warned.

Note: Do this at your own risk. I will not take any responsibility for any damages or errors your device might experience. If you follow the instructions by letter, you'll end up succeeding in flashing the device. Don't worry this device isn't easily brick-able but it isn't unbreakable. So you'll be able to try again many times, but minimize failure.

Instructions:

1. Download the tools and driver and your specified firmware (FX PR2 or FX PR2L).
2. Extract the downloaded archives for later use.
3. List down the IMEI, MAC and S/N which is written on the back of your device for later use.
   
4. Run the SWDownloader.exe from the extracted firmware folder.
   
5. Select the .blf file from the SWD folder in the extracted firmware folder.
6. Make sure the erase all flash is ticked.
   
7. Click the green bulb icon and connect your device using USB Cable with the battery removed.
   
8. Wait until the flashing is done and disconnect it from the USB cable.
   
9. Insert the battery and other telecom sim card (other sim cards besides SMART to check whether the unlocking is successful). Don’t connect yet to the device’s wi-fi because it might still have connectivity issues due to incorrect IMEI, MAC and S/N Configuration between the firmware and the hardware.
10. Turn on your device and hook it up to your PC using your USB Cable.
    
11. Run your Device Manager on your PC (Windows)
    
12. Update the driver of “Mobile AT Interface” and “Mobile AT Diag” by browsing the driver files which you have extracted earlier.
    
13. Run the “MIFITOOL1.0.0.3.exe” which you have extracted earlier.
    
14. Select the COM port no which the Marvell “AT Interface” is connected. Then input your device’s info which you have listed down earlier and click the button beside the text box as indicated. If successful in each Info write, the app will display a light green Chinese Character. Use the Read Back function to check whether you changed your Device’s Info.
    
15. Reboot your device and Connect.
16. Access your dashboard by entering 192.168.1.1 in your browser and using "smartbro" credentials for username and password.
17. Success!

Please don't forget to like and share this tutorial to others
-argotron -argonaut

For First Time Flashers you will need to install this WTPTP Driver first to your computer.
You do not have permission to view the full content of this post. Log in or register now.


If you are having problems with picking up your desired signal please post your device name and your area. If possible, you can open up your device hardware and try to find the board version written on the printed circuit board. The lines written on it should be like "L02E_1_8_1" or "L02D*" near the LCD or LED indicators and post it here. But remember, opening up your device hardware might remove the device's warranty. So the choice is yours to make.

 

[Incognito_69]

thanks po

 

[aldrin224]

sa observations ko lang.... pag smart na ulit nilagay mo na sim, ayaw makahanap ng lte signal sa area namin, di ko alam kung sa firmware ba to or ano.

 

[Argotron]

sa observations ko lang.... pag smart na ulit nilagay mo na sim, ayaw makahanap ng lte signal sa area namin, di ko alam kung sa firmware ba to or ano.

Sa area nyo yan walang LTE jan sa area na yan maging dito sa amin, GLobe lang ang naabot ng signal, about 1 bar ahahaha. Tingnan mo sa website ng smart kung may 4g sa area nyo

 

[rrjlim]

wala talaga signal boss

 

[rYzkiE]

sir salamat dito, working ang globe m023j ko kakagaling lang sa bootloop, using the You do not have permission to view the full content of this post. Log in or register now. firmware po. ang problema lang hanggang 3g lang siya, hindi siya umaabot sa 4g. yun lang naman po, pero you save my life sir, salamat po.

 

[kamputs]

pde kaya ito sa GLOBE LTE MiFi model: YOUWIN M022T kamuha kasi nung FXPR2L?

 

[rYzkiE]

pde kaya ito sa GLOBE LTE MiFi model: YOUWIN M022T kamuha kasi nung FXPR2L?

bootloop ba?

 

[kamputs]

bootloop ba?

hinde naman sir, nakuha ko lang sa trade in na promo ng globe bagong bago pa. ung sinurrender ko kasi sa kanila huawei eh openline, pero hinde ko ma openline hirap mag net sa probinsya ang globe, pero dito manila ok lang gusto ko lang ma openline para kahit saan ako mag punta hinde ako mamroblema sa signal. wala kasi sa mismong website ng Shanghai Boost yung M022T na model eh hinde kaya M023J lang ito binago lang ng globe yung sticker hehehe

 

[Argotron]

sir salamat dito, working ang globe m023j ko kakagaling lang sa bootloop, using the You do not have permission to view the full content of this post. Log in or register now. firmware po. ang problema lang hanggang 3g lang siya, hindi siya umaabot sa 4g. yun lang naman po, pero you save my life sir, salamat po.

Kahit po ba access sa dahboard tapos change ung MAnual Network?

If possible na kaya nyo buksan ung hardware ng device, makikita nyo dun sa loob ung board ver. if L02E_1_8_1 ung written sa printed circuit board, the firmware should work well. Pero kung ibang board version, pa post na lang para hanapan natin ng tamang firmware.

wala talaga signal boss

Ano po ung carrier ng sim? globe o smart? Anong device po? Pa post na lang ung specific details, pati na rin po ung area nyo para ma check nga if available ung certain signal na hinahanap nyo.

 

[Djunkie]

Argotron - Yong sakin board ko L02E_1_81. Successful naman yong pag flash. Yong nga 3G lang sya. May 4G signal dito samin sa Pasig. Naka 4G ako nung nag flash ako gamit yong una mong firmware.

Argotron - Yong sakin board ko L02E_1_81. Successful naman yong pag flash. Yong nga 3G lang sya. May 4G signal dito samin sa Pasig. Naka 4G ako nung nag flash ako gamit yong una mong firmware.

 

[Argotron]

Argotron - Yong sakin board ko L02E_1_81. Successful naman yong pag flash. Yong nga 3G lang sya. May 4G signal dito samin sa Pasig. Naka 4G ako nung nag flash ako gamit yong una mong firmware.

Argotron - Yong sakin board ko L02E_1_81. Successful naman yong pag flash. Yong nga 3G lang sya. May 4G signal dito samin sa Pasig. Naka 4G ako nung nag flash ako gamit yong una mong firmware.

ah ganon ba, wala namang problem sa part ko gamit ko ung bagong Web UI kita naman sa SS pero di ko alam kung sa Smart may problema since walang LTE dito ang smart sa area namin, hayss. Cge stick tau sa old firmware. Update ko lang ung reliable data.

 

[infinitygrade]

ah ganon ba, wala namang problem sa part ko gamit ko ung bagong Web UI kita naman sa SS pero di ko alam kung sa Smart may problema since walang LTE dito ang smart sa area namin, hayss. Cge stick tau sa old firmware. Update ko lang ung reliable data.

Ito gamitin mo na firmware 4G na at openline type mo lng sa MEP code 123456

You do not have permission to view the full content of this post. Log in or register now.

 

[Argotron]

Ito gamitin mo na firmware 4G na at openline type mo lng sa MEP code 123456

You do not have permission to view the full content of this post. Log in or register now.

Ung bagong firmware po na gi upload ko di na po need mag enter pa ng MEP Code still ung pin is 123456. Ang kaibahan lang di na kailangang e-enter ung pin everytime na nirereset ung MIFI.

Still di ko pa sure kung gumagana na sa ibang users. Kaya po feedback po wag pong kalimutan, lalo na ung sa mga 3G lang po nasasagap due to sa replacement ng WEB UI. ReUploaded ko na po ung firmware.

 

[infinitygrade]

Ung bagong firmware po na gi upload ko di na po need mag enter pa ng MEP Code still ung pin is 123456. Ang kaibahan lang di na kailangang e-enter ung pin everytime na nirereset ung MIFI.

Still di ko pa sure kung gumagana na sa ibang users. Kaya po feedback po wag pong kalimutan, lalo na ung sa mga 3G lang po nasasagap due to sa replacement ng WEB UI. ReUploaded ko na po ung firmware.

ah salamat bro. hehe.

 

[totoy_MOLA]

boss Argotron may way ba para sa error na SendPreamble failed in GetDeviceBootType? baka pwedeng solution kaya yung ganitong paraan kung mag software uprade? kaso di ko ma gets ung
"Warning!!! Please make sure you connect to MIFI using USB cable before upgrade." baka may idea ka boss yan ba ung gagamitin ung MIFITOOL? kung yan nga un pano ba tamang paggamit nyan baka pwedeng solusyon ito sa mga nag ka error na SendPreamble failed in GetDeviceBootType

pa check nalang boss ng image

 

[Yunjiro]

maraminh salamat dito po sir!!

 

[Ms Extraordinary]

salamat sa share

 

[kamputs]

rrjlim heto try mo updated TUT.

 

[dostresx]

Parang natatakot ako, if ever ba mali ang nagawa ko. Di ko na magagamit wifi ko?