What's new

Closed Root guide for SM-J100ML

Status
Not open for further replies.
Ngayon ko lng po ito nabasa may katanungan lang po ako. Maru-root pa po kaya yung samsung j1 ko kung nka system software update na? o anong pwede ko pong gawin para maroot? salamat po
 
Tip lang po para sa hindi makapasok sa TWRP after installing. After maflash or while nag rereboot yung device hugutin nyo na agad at wag nyo na antayin mag Boot alisin nyo po yung Bat then kabit ulit tsaka nyo itry access yung TWRP using Power Button + Home + Volume Up.

Sana po makatulong if nakatulong press Like na lang po
 
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Bat po ganun patulong naman po sir
 
Tip lang po para sa hindi makapasok sa TWRP after installing. After maflash or while nag rereboot yung device hugutin nyo na agad at wag nyo na antayin mag Boot alisin nyo po yung Bat then kabit ulit tsaka nyo itry access yung TWRP using Power Button + Home + Volume Up.

Sana po makatulong if nakatulong press Like na lang po


up for this it helpss. dagdag mo to ts sa 1stpage working
 
Sir kahit success po yung step 1 at PASS ang sabi ng ODIN. pero di padin makaaccess sa twrp recovery mode :( No command padin ang nakalagay
 
yung first po ay procedure para mainstall yung twrp yung second ay para maroot mo ang cp gamit ang twrp. hindi mo maroot yan kung hindi mo install ang twrp recovery. bale one way lang po yan hindi dalawa.

kung nagawa mo yung first procedure na walang mali installed na twrp recovery sa phone. ( presshttps://pinoyscreencast.net/how-to/tips-and-tricks/how-to-root-and-open-line-samsung-galaxy-j1-sm-j100ml-2/ and hold power key, home key and volume key up) gawin mo yan at tignan mo.

Kelangan ba nakapatay ang cp using the power, home and volume up
 
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!


ayana lang po nalabas sakin tas walang PASS laging reset, tas pag tiremove ko na yung phone tsaka lang nalabas yung PASS. ( tinanggal ko sya after 10mins )
 
Status
Not open for further replies.

Similar threads

Back
Top