What's new

Closed Tulong po mag pa open line cherry mobile flare light 2s

Status
Not open for further replies.

emaneduave

Addict
Joined
Sep 3, 2016
Posts
26
Reaction
5
Points
74
Panu KO ba pa ma unlock yung Sim 1ng phone KO?only for cherry Sim.gsto KO kasing palitan.tingnan nyo nalang ang screenshot...salamat kung alam nyo......may PIN siya.
 

Attachments

Openline Flare Lite 2 Sim 1

Openline/Unlock at your own risk!!!

REQUIREMENTS:

-A Rooted Flare Lite 2 ->> You do not have permission to view the full content of this post. Log in or register now.

-Terminal Emulator App ->> You do not have permission to view the full content of this post. Log in or register now.

-Root Explorer App ->> You do not have permission to view the full content of this post. Log in or register now.

-FL2 Openline NV files ->> You do not have permission to view the full content of this post. Log in or register now.

-Presence of Mind


First thing to do is to backup your IMEI. Just in case your IMEI will be changed.

1. Open Dialer and dial this codes *#*#83781#*#* (Engineer Mode)
2. Go to Telephony --> Set IMEI
3. Copy your Sim1 and Sim2 IMEI on a piece of paper.

Lets Start:

1. Extract FL2_NV_files.zip you downloaded earlier to your SDcard (don't place it on any folder)
2. Open Terminal Emulator then enter the following commands

Type "su" without quotation mark then enter

Type "dd if=sdcard/wfixnv1.bin of=dev/block/mmcblk0p5" without quoationmark then enter

Type "dd if=sdcard/wfixnv2.bin of=dev/block/mmcblk0p6" without quotation then enter

Type "dd if=sdcard/wcnfixnv1.bin of=dev/block/mmcblk0p10" without quotation then enter

Type "dd if=sdcard/wcnfixnv2.bin of=dev/block/mmcblk0p11" without quotation then enter

Type "reboot" without quotation then enter

3. Check your IMEI.
3.1 Open Dialer and dial this codes *#06#
If it's changed, then Go back to Engineer Mode and restore your original IMEI
 
Openline Flare Lite 2 Sim 1

Openline/Unlock at your own risk!!!

REQUIREMENTS:

-A Rooted Flare Lite 2 ->> How to root

-Terminal Emulator App ->> Download

-Root Explorer App ->> Download

-FL2 Openline NV files ->> Download

-Presence of Mind


First thing to do is to backup your IMEI. Just in case your IMEI will be changed.

1. Open Dialer and dial this codes *#*#83781#*#* (Engineer Mode)
2. Go to Telephony --> Set IMEI
3. Copy your Sim1 and Sim2 IMEI on a piece of paper.

Lets Start:

1. Extract FL2_NV_files.zip you downloaded earlier to your SDcard (don't place it on any folder)
2. Open Terminal Emulator then enter the following commands

Type "su" without quotation mark then enter

Type "dd if=sdcard/wfixnv1.bin of=dev/block/mmcblk0p5" without quoationmark then enter

Type "dd if=sdcard/wfixnv2.bin of=dev/block/mmcblk0p6" without quotation then enter

Type "dd if=sdcard/wcnfixnv1.bin of=dev/block/mmcblk0p10" without quotation then enter

Type "dd if=sdcard/wcnfixnv2.bin of=dev/block/mmcblk0p11" without quotation then enter

Type "reboot" without quotation then enter

3. Check your IMEI.
3.1 Open Dialer and dial this codes *#06#
If it's changed, then Go back to Engineer Mode and restore your original IMEI

for flare lite 2s ba to? kasi parang hindi, na wala kasi sim ko pag-ka tapos ko masunod yung procedure na nakasaad dito. pa verify naman po if for lollipop po ba to o pang kitkat.. thanks.. keep sharing
 
sundan nyo ito mga boss

To start the unlocking procedure, first see if your device is actually sim-locked by inserting another sim-card from another provider and see if it asks for a code. If it asks, press on dismiss. Now, the actual steps:
  1. Take a note of your CSC and MODEM with the help of You do not have permission to view the full content of this post. Log in or register now..
  2. Download from my GDrive You do not have permission to view the full content of this post. Log in or register now. and copy it to either an USB OTG drive or to a MicroSD card (if you have one).
  3. Make sure you have a custom recovery installed. Boot into it with the VOL UP+HOME+POWER button combination and make a nandroidbackup of your current ROM. Make sure to do it on the MicroSD if you have one.
  4. Go and do an advanced wipe and only wipe the following partitions: Cache, Dalvik Cache, Data and System.
  5. Now install the zip file you previously copied on either an external USB OTG drive or on the MicroSD card.
  6. While the rom is booting, search around on XDA for the aforementioned You do not have permission to view the full content of this post. Log in or register now. code and a suitable You do not have permission to view the full content of this post. Log in or register now. for your BACKED UP rom.(The ZIP file I provided you will have changed the modem and CSC, so make sure you noted the CSC and modem before)
  7. After the rom is done booting, skip the set-up wizard and the network lock screen. Now, go to the dialer and type *#197328640#
  8. Here, go this way: [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > [3]Perso SHA256 OFF > and wait for around 30 seconds. If you see at the Network Lock screen 4 options, you are good to go.
  9. Press on the menu button (device) and tap on Back. Then, choose [4] NW Lock NV Data INITIALLIZ. After about 30 seconds, you should see PERSO_NV_INIT is SUCCESSFUL. From this point , you are unlocked. You can use any sim card in the device. If you have a third carrier sim card, test it out.
  10. Reboot the phone and enjoy your unlocked phone. NOT SO FAST.
  11. Reboot back to recovery and do an advanced wipe (the following partitions: Cache, Dalvik Cache, Data and System). Restore your nandroid backup now. Don't reboot the device to system, but go and flash the MODEM and CSC. Now, you are ready to reboot back to system and enjoy your KitKat or Lollipop ROM.
 
Status
Not open for further replies.
Back
Top