What's new

Closed Tulong paano ba mag unlock ng smartbro mf60?

Status
Not open for further replies.

glizel

Eternal Poster
Established
pahelp naman mga boss masters dyan paano ba mag unlock ng smartbro mf60 imei:357515041278843 salamat po
 
Eto oh...
REFLASH or DEBRAND to Change the APN

BACK UP FIRST : You do not have permission to view the full content of this post. Log in or register now.

Advantages:
  • You will have more up-to-date firmware. With the branded firmware, you're stuck on that version until your operator release a new firmware.
  • With the newest firmware from ZTE, you're now can have up to 10 concurrent connections to the router. The ZTE firmware alllows 5.
  • You will get more information on the device like downlink speed and uplink speed. You can customize your device more
  • You can have your router in USB-mode, this feature is disabled on original ZTE firmware.


Disadvantages:
  • You lose your warranty of the device. You have no way to re-install your device back to original ZTE firmware.



REQUIREMENTS!
The original ZTE firmware tool. Download the file called You do not have permission to view the full content of this post. Log in or register now.
Telenor firmware tool You do not have permission to view the full content of this post. Log in or register now.
ρá†ch tool : MF60-ρá†ch.zip

Or

MEGA --> You do not have permission to view the full content of this post. Log in or register now.
Google Drive 1 - You do not have permission to view the full content of this post. Log in or register now.
Google Drive 2 - You do not have permission to view the full content of this post. Log in or register now.
AnonFiles - You do not have permission to view the full content of this post. Log in or register now.


Let's start

**Install MF60 driver**
++Please Remove the SIM++
0. Connect the Modem using the "USB wire"
1. "Run As Administrator" telenor firmware tool and wait until the upgrade button becomes available.
ScreenShot137.jpg
2. Close the tool. DONT UPGRADE YET!!
3. Now your windows should found the new devices, it should look something similar to this. Wait until all devices are installed.
ScreenShot138.jpg
4. Start the official ZTE firmware tool. and ρá†ch TOOL!
ScreenShot139.jpg
5. Once it is ρá†ch , next is UPDATE!
ScreenShot134.jpg
ScreenShot135.jpg
6. Wait until it's finished, it will take around 5-10 mins
7. Now you have original ZTE firmware installed! The HOME now is m.home or 192.168.0.1 . The PASSWORD is "admin"
ZTEMF60_004.jpg

8. To enable USB mode, simply run Telenor tool again and wait until the upgrade button become available. Close the tool. That's it. With the original firmware, the battery indicator is still there even if you're in diag mode.
9. Enjoy your debranded ZTE MF60!




Note: Before you change your APN , DISCONNECT FIRST!
http://www.phc.onl/#forbidden#.com/attachment.php?attachmentid=757162&d=1371627960
Sa mga naka MF60 (Firmware: BD_SMARTMF60V1.0.0B02) na unlocked na at hindi mapalitan ang APN kahit gamitan ng

The original ZTE firmware tool. Download the file called You do not have permission to view the full content of this post. Log in or register now.
Telenor firmware tool You do not have permission to view the full content of this post. Log in or register now.
ρá†ch tool : MF60-ρá†ch.zip

Sa iba pang tools para sa MF60 basahin nyo po ang thread ni Boss dLinKx eto po ang maitutulong ko.

Basahin nyo po ito.

You do not have permission to view the full content of this post. Log in or register now.

after po ng instruction # 6. Delete files "Version, Config" (Please do a backup in case if something will go wrong put it back) and close all QPST windows.

HUWAG NYO PO ICLOSE ANG QPST MUNA!!!

Follow nyo po muna ito bago kayo mag proceed sa # 7


Download original MF60 files "Version, Config" here
Config You do not have permission to view the full content of this post. Log in or register now.
Version You do not have permission to view the full content of this post. Log in or register now.

(backup ko po yan)

after ng download, open nyo po yung folder location ng downloads nyo, then select nyo po ang CONFIG and VERSION then drag nyo sa QPST EFS Explorer.

then close QPST EFS Explorer.

then restart MF60.

then proceed to # 7 or use You do not have permission to view the full content of this post. Log in or register now.

Nung unang try ko, inabot ako ng 4 hrs. http://www.phc.onl/#forbidden#.com/images/smilies/wink.png

Done this 3x sa mga makukulit na MF60.

BAKA NAMAN PO MERON KAYO TUT PARA SA E5756s-2. Kailangan ko din po tulong.

Sa mga magtry po sana nitong konti ko contribution. Paki confirm naman po kung nagwork sa inyo.

Maraming salamat po.

God bless
 

Attachments

Eto oh...
REFLASH or DEBRAND to Change the APN

BACK UP FIRST : You do not have permission to view the full content of this post. Log in or register now.

Advantages:
  • You will have more up-to-date firmware. With the branded firmware, you're stuck on that version until your operator release a new firmware.
  • With the newest firmware from ZTE, you're now can have up to 10 concurrent connections to the router. The ZTE firmware alllows 5.
  • You will get more information on the device like downlink speed and uplink speed. You can customize your device more
  • You can have your router in USB-mode, this feature is disabled on original ZTE firmware.


Disadvantages:
  • You lose your warranty of the device. You have no way to re-install your device back to original ZTE firmware.



REQUIREMENTS!
The original ZTE firmware tool. Download the file called You do not have permission to view the full content of this post. Log in or register now.
Telenor firmware tool You do not have permission to view the full content of this post. Log in or register now.
pâtch tool : You do not have permission to view the full content of this post. Log in or register now.

Or

MEGA --> You do not have permission to view the full content of this post. Log in or register now.
Google Drive 1 - You do not have permission to view the full content of this post. Log in or register now.
Google Drive 2 - You do not have permission to view the full content of this post. Log in or register now.
AnonFiles - You do not have permission to view the full content of this post. Log in or register now.


Let's start

**Install MF60 driver**
++Please Remove the SIM++
0. Connect the Modem using the "USB wire"
1. "Run As Administrator" telenor firmware tool and wait until the upgrade button becomes available.
ScreenShot137.jpg
2. Close the tool. DONT UPGRADE YET!!
3. Now your windows should found the new devices, it should look something similar to this. Wait until all devices are installed.
ScreenShot138.jpg
4. Start the official ZTE firmware tool. and pâtch TOOL!
ScreenShot139.jpg
5. Once it is pâtch , next is UPDATE!
ScreenShot134.jpg
ScreenShot135.jpg
6. Wait until it's finished, it will take around 5-10 mins
7. Now you have original ZTE firmware installed! The HOME now is m.home or 192.168.0.1 . The PASSWORD is "admin"
ZTEMF60_004.jpg

8. To enable USB mode, simply run Telenor tool again and wait until the upgrade button become available. Close the tool. That's it. With the original firmware, the battery indicator is still there even if you're in diag mode.
9. Enjoy your debranded ZTE MF60!




Note: Before you change your APN , DISCONNECT FIRST!
attachment.php

Sa mga naka MF60 (Firmware: BD_SMARTMF60V1.0.0B02) na unlocked na at hindi mapalitan ang APN kahit gamitan ng

The original ZTE firmware tool. Download the file called You do not have permission to view the full content of this post. Log in or register now.
Telenor firmware tool You do not have permission to view the full content of this post. Log in or register now.
pâtch tool : You do not have permission to view the full content of this post. Log in or register now.

Sa iba pang tools para sa MF60 basahin nyo po ang thread ni Boss dLinKx eto po ang maitutulong ko.

Basahin nyo po ito.

You do not have permission to view the full content of this post. Log in or register now.

after po ng instruction # 6. Delete files "Version, Config" (Please do a backup in case if something will go wrong put it back) and close all QPST windows.

HUWAG NYO PO ICLOSE ANG QPST MUNA!!!

Follow nyo po muna ito bago kayo mag proceed sa # 7


Download original MF60 files "Version, Config" here
Config You do not have permission to view the full content of this post. Log in or register now.
Version You do not have permission to view the full content of this post. Log in or register now.

(backup ko po yan)

after ng download, open nyo po yung folder location ng downloads nyo, then select nyo po ang CONFIG and VERSION then drag nyo sa QPST EFS Explorer.

then close QPST EFS Explorer.

then restart MF60.

then proceed to # 7 or use You do not have permission to view the full content of this post. Log in or register now.

Nung unang try ko, inabot ako ng 4 hrs.
wink.png


Done this 3x sa mga makukulit na MF60.

BAKA NAMAN PO MERON KAYO TUT PARA SA E5756s-2. Kailangan ko din po tulong.

Sa mga magtry po sana nitong konti ko contribution. Paki confirm naman po kung nagwork sa inyo.

Maraming salamat po.

God bless
Ok to boss try ko narin meron kasi akpng stock na ganito
 

Attachments

Status
Not open for further replies.
Back
Top