Closed smart lte signal apn
- Thread starter angelo cruz
- Start date
-
- Tags
- apn for smart lte
- Status
Pre paano magpalit ng apn sa pocket wifi?di ko kabalo haha
type sa any browser( mas prefer ako sa pc)- 192.168.1.1 then type username at pass... tingnan mo lang ang label sa pocket wifi kung anong pass at user.... i hope makatulong
Naaccess ko na ang gui ng pocket wifi ko bro...di ko lang alam san ang pag palit ng apn...hinanap ko na sa settings...pwede kaya i edit pag naka plug sa computer?
globe tattoo ba yang pocket wifi mo?
angelo cruz
Forum Guru
- TS TS
- #49
ah pldc ulteraThanks dito TS.
Anong modem gamit mo?
Huawei B315s-936 (Globe) Admin Access
You do not have permission to view the full content of this post. Log in or register now. You do not have permission to view the full content of this post. Log in or register now. You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now.
How to Obtain Huawei B315s-936 (Globe) Admin Access:
1) Enter USB mode by following Step 3 of “You do not have permission to view the full content of this post. Log in or register now.”.
2) Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. To check if you have chosen the right COM Port, click on “Read IMEI”. The “Logs” window should display the modem’s IMEI number otherwise select a different COM Port. Do not edit the codes . You might brick your modem (Joke lang).
3) Enter the following commands:
First Code: This Query Datalock Status Value. Default value is “1” (Enabled)
at^datalock?
Second Code: This Sets The Datalock Value to 12345678
AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Third Code: This Sets Datalock Status value to “0” (Disabled)
at^datalock="12345678"
Fourth Code: This will set your modem to factory mode
at^sfm=1
Fifth Code: This will reset your modem. Wait until the modem reboots and shows a
AT^reset
---Steady power light indicator Only !!
4) Connect your modem to your PC via LAN Cable
Under “Network Properties”, Set IP manually as follows:
click “Use the Following IP Address”
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Tick “Use the following DNS Server Adressess”
Preferred DNS: 192.168.1.1
Alternate DNS: (leave blank)
Click OK
5) Run “You do not have permission to view the full content of this post. Log in or register now.” login kayo user user pero minsan kahit wala start nyo lang and wait for it to complete successfully.
Exit “Config Updater” and reboot modem.
6) Enter USB mode (back to Step 1 USB Mode link)
• Run CID reader in USB mode and enter the following commands:
Pag ayaw mag telnet kayo 192.168.1.1 duon nyo input yan..
Telnet 192.168.1.1
user:admin
pas:admin or
user:user
password:user
First Code : This command will kick your modem out of factory mode
at^sfm=0
Second Code : Resets and reboots the modem
AT^reset
7) After successfully rebooting, go to Network Properties again and click “Obtain IP
Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the
modem’s web interface by typing 192.168.254.254 in your browser.
Login as....
Username: admin
Password: admin
Go to “Settings”.
Choose “Restore Default”
The modem will reboot.
Done. You now have admin access to your modem.
pag ayaw mag hardreset po kayo ulitin nyo
WALANG KWENTA ADMIN!! Kulang TABs!! parang User lang And DAMOT ni Globe!! walang APN setting
Dahil Walang kwenta yung admin mag CID Reader nalang tayo wahaha or Mobile Partner pwede din mag set ng APN or 3G Only parasa RED LIGHT na SMART sakit ni 315s 4G REDLIGHT....
Set the APN to “internet.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Postpaid/LTE)
Enter this command:
AT+CGDCONT=1,"IP","internet.globe.com.ph"
OR Set the APN to “http.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Prepaid/LTE)
Enter this command:
AT+CGDCONT=1,"IP","http.globe.com.ph”
OR Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).
Enter this command:
AT+CGDCONT=1,"IP","internet”
Last command Reboots the modem.
AT^reset
Eto ibig sabihin ng format ng command
AT+CGDCONT=1,"IP","http.globe.com.ph"
ATD*99***1#
red = profile priority
green = IP address ex:format (xx.xx.xx.xx)
blue = APN name
pink = dialup number (optional kung 3g ang masagap na signal) source (Freddy3k)
MOBILE PARTNER USB MODE
No Signal if naka Lock sa LTE Only
Gawin mo AUTO yan mag kakasignal na yan
Paano Gawin Pumunta sa Setting Preferences
The owner of blogmytut.phc.onl/#forbidden# will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.Report any Broken Download linkon You do not have permission to view the full content of this post. Log in or register now.. IF YOU WANT TO BORROW MY CONTENTYou do not have permission to view the full content of this post. Log in or register now..
Lebronkingjames016
Addict
ah pldc ultera
Huawei B315s-936 (Globe) Admin Access
You do not have permission to view the full content of this post. Log in or register now. You do not have permission to view the full content of this post. Log in or register now. You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now. , You do not have permission to view the full content of this post. Log in or register now.
How to Obtain Huawei B315s-936 (Globe) Admin Access:
1) Enter USB mode by following Step 3 of “You do not have permission to view the full content of this post. Log in or register now.”.
2) Run CID reader in USB mode and enter the following commands.
Note: select proper COM port in your CID reader before entering the codes below. To check if you have chosen the right COM Port, click on “Read IMEI”. The “Logs” window should display the modem’s IMEI number otherwise select a different COM Port. Do not edit the codes . You might brick your modem (Joke lang).
3) Enter the following commands:
First Code: This Query Datalock Status Value. Default value is “1” (Enabled)
at^datalock?
Second Code: This Sets The Datalock Value to 12345678
AT ^ NVWREX = 50502,0,128,4A FB 2D 5A 34 74 86 F0 A6 CC AE 46 99 53 83 1D 5C B1 7E 2A EF B2 B0 1A EF 53 03 8E C8 FF 1C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8B 8C F4 B5 AF 0C F2 2C FE E0 F4 46 9C CF 47 95 36 71 1F 1C BF 05 7F 84 AB A9 F2 92 89 33 3C 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Third Code: This Sets Datalock Status value to “0” (Disabled)
at^datalock="12345678"
Fourth Code: This will set your modem to factory mode
at^sfm=1
Fifth Code: This will reset your modem. Wait until the modem reboots and shows a
AT^reset
---Steady power light indicator Only !!
4) Connect your modem to your PC via LAN Cable
Under “Network Properties”, Set IP manually as follows:
click “Use the Following IP Address”
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Tick “Use the following DNS Server Adressess”
Preferred DNS: 192.168.1.1
Alternate DNS: (leave blank)
Click OK
5) Run “You do not have permission to view the full content of this post. Log in or register now.” login kayo user user pero minsan kahit wala start nyo lang and wait for it to complete successfully.
Exit “Config Updater” and reboot modem.
6) Enter USB mode (back to Step 1 USB Mode link)
• Run CID reader in USB mode and enter the following commands:
Pag ayaw mag telnet kayo 192.168.1.1 duon nyo input yan..
Telnet 192.168.1.1
user:admin
pas:admin or
user:user
password:user
First Code : This command will kick your modem out of factory mode
at^sfm=0
Second Code : Resets and reboots the modem
AT^reset
7) After successfully rebooting, go to Network Properties again and click “Obtain IP
Address Automatically” and “Obtain DNS Address Automatically”. Try to log into the
modem’s web interface by typing 192.168.254.254 in your browser.
Login as....
Username: admin
Password: admin
Go to “Settings”.
Choose “Restore Default”
The modem will reboot.
Done. You now have admin access to your modem.
pag ayaw mag hardreset po kayo ulitin nyo
WALANG KWENTA ADMIN!! Kulang TABs!! parang User lang And DAMOT ni Globe!! walang APN setting
Dahil Walang kwenta yung admin mag CID Reader nalang tayo wahaha or Mobile Partner pwede din mag set ng APN or 3G Only parasa RED LIGHT na SMART sakit ni 315s 4G REDLIGHT....
Set the APN to “internet.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Postpaid/LTE)
Enter this command:
AT+CGDCONT=1,"IP","internet.globe.com.ph"
OR Set the APN to “http.globe.com.ph” of the Globe Network to be connected to (use if sim is Globe Prepaid/LTE)
Enter this command:
AT+CGDCONT=1,"IP","http.globe.com.ph”
OR Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).
Enter this command:
AT+CGDCONT=1,"IP","internet”
Last command Reboots the modem.
AT^reset
Eto ibig sabihin ng format ng command
AT+CGDCONT=1,"IP","http.globe.com.ph"
ATD*99***1#
red = profile priority
green = IP address ex:format (xx.xx.xx.xx)
blue = APN name
pink = dialup number (optional kung 3g ang masagap na signal) source (Freddy3k)
MOBILE PARTNER USB MODE
No Signal if naka Lock sa LTE Only
Gawin mo AUTO yan mag kakasignal na yan
Paano Gawin Pumunta sa Setting Preferences
The owner of blogmytut.phc.onl/#forbidden# will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.Report any Broken Download linkon You do not have permission to view the full content of this post. Log in or register now.. IF YOU WANT TO BORROW MY CONTENTYou do not have permission to view the full content of this post. Log in or register now..
This is very nice! Boom! Thank you dito. Saved na to
doflamingo_13
Enthusiast
Ty
angelo cruz
Forum Guru
- TS TS
- #54
ultera smart pldc gamit ko
Last edited:
Please refrain from making one word/single smiley posts as they can appear to be spam and are too vague to be sufficient feedback.
Read the rules: https://phcorner.net/rules
angelo cruz
Forum Guru
- TS TS
- #56
bawas points po ba yun ? or warning
Huh? Pinagsabihan lang kita, the next na gagawin mo ulit yung violation, doon ka na mawawarningan.
finding nemo
Honorary Poster
"Enter this command:
AT+CGDCONT=1,"IP","http.globe.com.ph”
OR Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).
Enter this command:
AT+CGDCONT=1,"IP","internet”
Last command Reboots the modem.
AT^reset "
boss i need your help...hehe
ng nag openline kasi ako ginamit ko dun sa CID reader eh APN ni postpaid.
so di na gagana tu pag sinalpakan ko ng globe prepaid?
anu gagawin ko? run ko nlng ung CID reader tapos AT comand using prepaid?
or need ko ulitin all step?
PLS feedback ASAP
AT+CGDCONT=1,"IP","http.globe.com.ph”
OR Set the APN to “internet” of the Smart Network to be connected to (use if sim is Smart Prepaid/LTE).
Enter this command:
AT+CGDCONT=1,"IP","internet”
Last command Reboots the modem.
AT^reset "
boss i need your help...hehe
ng nag openline kasi ako ginamit ko dun sa CID reader eh APN ni postpaid.
so di na gagana tu pag sinalpakan ko ng globe prepaid?
anu gagawin ko? run ko nlng ung CID reader tapos AT comand using prepaid?
or need ko ulitin all step?
PLS feedback ASAP
paano 'to palitan sa pldt ultera? yung canopy type? pwede ba yun? salamat
- Status
Similar threads
-
-
-
-
-
A python script to bypass the download limit of google drive files (w executable&source code)
- Started by pyxl
- Replies: 16
Popular Tags
android
cloudfront
custom
ehi
fast
freenet
giga games
giga stories
gigastories
hpi
http
http custom
http injector
injector
ktr
load
ml10
modem
new update
no block
no blocking
no load
noload
open tunnel
ovpn
payload
ph server
promo
proxy
server
sg server
smart
smart & tnt sim
sts
sts no load
sts noload
sun
sun & smart
sun ehi
surfsaya
talk 'n text
talkntext
tiktok
tnt
unli
unli data
unli tiktok
unlidata
update
vpn