Closed recovery mode on rooted/locked android phones

Usually, for booting into recovery, you need to press a combination of buttons on your handset. First you have to turn off your device, wait a few seconds and then press power and volume up buttons at the same time for a few seconds. The recovery mode should be displayed. But, if that isn’t working for you, follow the guidelines from below:

Enter Recovery Mode on Rooted Android devices

1. This is the easiest way that can be completed.
2. From Google Play you need to download a tool on your device.
3. So, access the Play Store and search for the Quick Boot tool.
4. You can manually download the app by using the link You do not have permission to view the full content of this post. Log in or register now.
5. Install the tool on your phone / tablet.
6. Run the same.
7. From the menu that will be displayed (Recovery, Reboot, Bootloader and Power Off) select “recovery”.
8. Now your handset will be rebooted into recovery mode...

Enter Recovery Mode on Locked Android devices

1. In order to succeed with these steps, you will need access to a computer or notebook.
2. Your handset and its USB cable should also be there.
3. Your phone must have USB debugging option enabled.
4. On your computer Android SKD must be installed -> learn You do not have permission to view the full content of this post. Log in or register now. or learn You do not have permission to view the full content of this post. Log in or register now.
5. Connect your device with the computer by using its USB cable.
6. On your computer navigate through the Fastboot folder.
7. There open a command prompt window.
8. On the cmd window type: “adb reboot recovery”.
9. Good, now your handset will automatically enter in recovery mode menu.

di ko na kasi mahanap yung thread nung nagtatanong kung paano po ienter sa recovery mode ang pac 27 nya... ginawan kona lang thread baka sakaling makita nya at pakinabangan na din po ng lahat...

nakuha ko po ang tutorial through searching kay google...

Nice trend!!!...







pero pwedi din nman pong power+vol down tpus clear chache or download other CWM pra mwala yung lock at makapag restart or format ka pag ok na restart then pwedi na ulit sya sa power+vol up...



Salamat na din po dto may bagu akong nalaman.

esornird said:

Nice trend!!!...







pero pwedi din nman pong power+vol down tpus clear chache or download other CWM pra mwala yung lock at makapag restart or format ka pag ok na restart then pwedi na ulit sya sa power+vol up...



Salamat na din po dto may bagu akong nalaman.

Click to expand...

nasubukan ko na din po kasi yung sinabi nyo pero d po nagwork sa zh&k blitz ko... ^_^

para din po ito sa mga d nagwork yung vol + + pwer botton or for vol- + pwr botoon nila..^_^

Ai ganun po ba? Minsan po kase dependi din sa unit ng cp yun, kelangan mo pang e clear para mkapag install ka ng bagu... hehe

Salamat sa pagshare boss janna
Boss esornird, masyado malayo spacing mo baka mapagalitan ka

Hahah uo nga no!
Sorry po sanay na sanay lang sa text type kaya midyu ganyan...

Dear janna1986,

Since 2 years have passed since the last reply in this thread, I am locking it to prevent necroposting. Feel free to start a new thread or contact any forum staff if you want this to be reopened.

Thread closed.