Sa mga nagbabalak i-share free net nila sa pc/laptop gamit wifi adapter or usb adapter. Ito isang alternative way. No need modem/router or additional hardware.
Required:
1. pdaNet (fully unlock).
2. Wifi adapter (built-in for Laptop) or Wifi usb adapter for PC.
3. Wifi adapter should have AP mode function.
4. USB debugging mode enabled (phone).
Wifi adapter AP mode function
- This enables your wifi adapter to broadcast signal (transmit) instead of receiving wifi signal. In short, your adapter will serve as a wifi hotspot.
Instructions:
PDANet to PC internet connection:
1. Download and install pdaNet apk on your android phone and the windows installer for your laptop/pc. Full instructions can be found in their website You do not have permission to view the full content of this post. Log in or register now.. If you need the unlock version, it’s searchable.
2. Turn-on USB debugging mode on your phone.
3. Connect phone to laptop/pc via usb cable.
4. Open pdaNet on your phone and click “Activate USB Mode”.
5. On your PC, Right click the pdaNet icon in the system tray and click connect.
6. Let your laptop/pc finish setting up its network configuration. Once done, pdaNet icon should say connected.
PDANet to Wifi adapter internet sharing:
1. Open up your network connection via control panel.
--- Control Panel\Network and Internet\Network Connections
2. Look for PdaNet modem in your list of adapters.
--- Right click > Choose properties > Go to Sharing tab > Click “allow other network users….” > under home network connection drop-down, select Wireless Network Connection> Click OK.
3. Open-up wifi config utility (mine is realtek11n wireless lan utility) by double-clicking the program or from the start menu or right-clicking the icon on the system tray.
4. Click “Mode (M)” from the menu bar > Select “Access Point”. Wait until its done setting up your access point.
5. Your config utility interface will now change to AP mode showing your ssid and the list of devices connected. To configure your hotspot, just click the “Config” button. From there you can change your preferred SSID and setup your hotspot password.
6. Your internet is now shared thru wifi.
Note: if you change to AP mode, you will not receive wifi signal from other devices since you are the one broadcasting the signal. Hence you are the Hot Spot. If you want to receive signal again just change your wifi config to “station”mode (this is for realtek only). Refer to your wifi adapter manufacturer setup or just search the net.
--- For assistance comment below or HIT LIKE if it serves you well.
Required:
1. pdaNet (fully unlock).
2. Wifi adapter (built-in for Laptop) or Wifi usb adapter for PC.
3. Wifi adapter should have AP mode function.
4. USB debugging mode enabled (phone).
Wifi adapter AP mode function
- This enables your wifi adapter to broadcast signal (transmit) instead of receiving wifi signal. In short, your adapter will serve as a wifi hotspot.
Instructions:
PDANet to PC internet connection:
1. Download and install pdaNet apk on your android phone and the windows installer for your laptop/pc. Full instructions can be found in their website You do not have permission to view the full content of this post. Log in or register now.. If you need the unlock version, it’s searchable.
2. Turn-on USB debugging mode on your phone.
3. Connect phone to laptop/pc via usb cable.
4. Open pdaNet on your phone and click “Activate USB Mode”.
5. On your PC, Right click the pdaNet icon in the system tray and click connect.
6. Let your laptop/pc finish setting up its network configuration. Once done, pdaNet icon should say connected.
PDANet to Wifi adapter internet sharing:
1. Open up your network connection via control panel.
--- Control Panel\Network and Internet\Network Connections
2. Look for PdaNet modem in your list of adapters.
--- Right click > Choose properties > Go to Sharing tab > Click “allow other network users….” > under home network connection drop-down, select Wireless Network Connection> Click OK.
3. Open-up wifi config utility (mine is realtek11n wireless lan utility) by double-clicking the program or from the start menu or right-clicking the icon on the system tray.
4. Click “Mode (M)” from the menu bar > Select “Access Point”. Wait until its done setting up your access point.
5. Your config utility interface will now change to AP mode showing your ssid and the list of devices connected. To configure your hotspot, just click the “Config” button. From there you can change your preferred SSID and setup your hotspot password.
6. Your internet is now shared thru wifi.
Note: if you change to AP mode, you will not receive wifi signal from other devices since you are the one broadcasting the signal. Hence you are the Hot Spot. If you want to receive signal again just change your wifi config to “station”mode (this is for realtek only). Refer to your wifi adapter manufacturer setup or just search the net.
--- For assistance comment below or HIT LIKE if it serves you well.