Extending the Network With Wi-Fi
Step 1
Plug the wireless router's A/C adapter into a power outlet and connect the ends of an Ethernet cable to the computer's LAN port and one of the router's LAN ports.
Step 2
Follow the wireless router's model-specific setup instructions included with the device to enable Wi-Fi. The computer used to set up the router can be disconnected from the main network during the process.
Step 3
Disconnect the router's Ethernet cable from the computer and reconnect the computer to the network.
Step 4
Power down the wireless router if necessary and move it to a position where it's close enough to reach the existing LAN's network switch or hub with the Ethernet cable. Reconnect the router's A/C adapter if necessary.
Step 5
Connect one end of the Ethernet cable to any LAN port on the current network switch or hub.
Step 6
Connect the other end of the Ethernet cable to the wireless router's uplink port if the device has one. If the wireless router doesn't have an uplink port, connect the cable to the WAN port.
Adding the LAN to the Wi-Fi Router's Network
Step 1
Place the router so the Ethernet cable can reach from it to both the modem and the existing LAN switch or hub device.
Step 2
Connect one end of an Ethernet cable to the modem's LAN port and the other end to the wireless router's WAN port.
Step 3
Connect one end of a second Ethernet cable to the Uplink port on the network switch or hub and the other end of the cable to any of of the LAN ports on the router. If the hub or switch has an "Uplink/LAN" toggle button for the Uplink port, push the button to the "Uplink" position.
Step 4
Follow the wireless router's model-specific setup instructions included with the device to enable Wi-Fi.