THIS NETBIOS häçkING GUIDE WILL TELL YOU ABOUT häçkING
REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK
OR PRINTER.
NETBIOS häçk IS THE EASIEST WAY TO BREAK
INTO A REMOTE COMPUTER.
How to häçk!step bystep tutorial :
1. Open command prompt
2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.
BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).
Example: C:>net view \59.43.45.212
The above is an example for operation using command prompt.”net
view” is one of the netbios command to view the shared resources of the remote computer.
Here “59.43.45.212? is an IP address of remote
computer that is to be häçked through Netbios.
You have to
substitute a vlaid IP address in it’s place.
If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.
If not an error message is displayed.
So repeat the procedure 2 with a different IP address.
3. After succeeding, use the “net use” command in the command
prompt.
The “net use” is another netbios command which makes it
possible to häçk remote drives or printers.
Example-1:
C:>net use D: \59.43.45.212F
Example-2:
C:>net use G: \59.43.45.212SharedDocs
Example-3:
C:>net use I: \59.43.45.212Myprint
NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names
that are to be created on your computer to access remote
computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER
DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND
ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D:
AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE
F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s
drives that you want to häçk.
“Myprint” is the name of remote
computer’s printer.
These are displayed after giving “net use”
command.
“59.43.45.212? is the IP address of remote computer that you want to häçk.
4. After succeeding your computer will give a message that “The
command completed successfully“.
Once you get the above message you are only one step away from häçking the computer.
Now open “My Computer” you will see a new “Hard-Disk
drive”(Shared) with the specified name.
You can open it and access remote computer’s Hard-Drive.
You can copy files,music,folders etc.
from victim’s hard-drive.
You can delete/modify data on victim’s
hard-drive only if WRITE-ACCESS is enabled on victim’s system.
You
can access filesfolders quickly through “Command Prompt”.
NOTE:
If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through
Netbios.
That is Netbios häçking Is Not Possible In This Situation.
(An Error Message Is Displayed).
So Repeat The Procedure 2,3 With
Different IP Address.
Note:para hindi ma-sampolan ng mga magta-try nito disable niyo ung NetBIOS sa inyong ginagamit na connection "Your Connection Name >> Properties >> Networking >> Internet Protocol (TCP/IP) >> Advanced >> WINS >> NetBIOS >> Disable NetBIOS over TCP/IP"
Or try niyo gumamit ng firewal
this is educational purpose only
REMOTE COMPUTER AND GAINING ACCESS TO IT’S HARD-DISK
OR PRINTER.
NETBIOS häçk IS THE EASIEST WAY TO BREAK
INTO A REMOTE COMPUTER.
How to häçk!step bystep tutorial :
1. Open command prompt
2. In the command prompt use the “net view” command
( OR YOU CAN ALSO USE “NB Scanner” OPTION IN “IP-TOOLS” SOFTWARE BY ENTERING RANGE OF IP ADDRESSS.
BY THIS METHOD YOU CAN SCAN NUMBER OF COMPUTERS AT A TIME).
Example: C:>net view \59.43.45.212
The above is an example for operation using command prompt.”net
view” is one of the netbios command to view the shared resources of the remote computer.
Here “59.43.45.212? is an IP address of remote
computer that is to be häçked through Netbios.
You have to
substitute a vlaid IP address in it’s place.
If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.
If not an error message is displayed.
So repeat the procedure 2 with a different IP address.
3. After succeeding, use the “net use” command in the command
prompt.
The “net use” is another netbios command which makes it
possible to häçk remote drives or printers.
Example-1:
C:>net use D: \59.43.45.212F
Example-2:
C:>net use G: \59.43.45.212SharedDocs
Example-3:
C:>net use I: \59.43.45.212Myprint
NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names
that are to be created on your computer to access remote
computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER
DRIVES INCLUDING HARD-DISK DRIVES,FLOPPY DRIVES AND
ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D:
AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE
F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s
drives that you want to häçk.
“Myprint” is the name of remote
computer’s printer.
These are displayed after giving “net use”
command.
“59.43.45.212? is the IP address of remote computer that you want to häçk.
4. After succeeding your computer will give a message that “The
command completed successfully“.
Once you get the above message you are only one step away from häçking the computer.
Now open “My Computer” you will see a new “Hard-Disk
drive”(Shared) with the specified name.
You can open it and access remote computer’s Hard-Drive.
You can copy files,music,folders etc.
from victim’s hard-drive.
You can delete/modify data on victim’s
hard-drive only if WRITE-ACCESS is enabled on victim’s system.
You
can access filesfolders quickly through “Command Prompt”.
NOTE:
If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through
Netbios.
That is Netbios häçking Is Not Possible In This Situation.
(An Error Message Is Displayed).
So Repeat The Procedure 2,3 With
Different IP Address.
Note:para hindi ma-sampolan ng mga magta-try nito disable niyo ung NetBIOS sa inyong ginagamit na connection "Your Connection Name >> Properties >> Networking >> Internet Protocol (TCP/IP) >> Advanced >> WINS >> NetBIOS >> Disable NetBIOS over TCP/IP"
Or try niyo gumamit ng firewal
this is educational purpose only