Help Mga sir newbie lang... paturo lang po sa bm22i. 2010 ko yun ip add nya kase 169.

deNzkie20 said:

mga sir newbie lang... paturo lang po sa bm22i. 2010 ko yun ip add nya kase 169.

Click to expand...

magstatic ip ka lang solve na yan ..pasok ka sa ipv4 ito o

Description: Realtek PCIe GBE Family Controller

DHCP Enabled: Yes
IPv4 Address: 192.168.254.100
IPv4 Subnet Mask: 255.255.255.0


IPv4 Default Gateway: 192.168.254.1
IPv4 DHCP Server: 192.168.254.1
IPv4 DNS Servers: 8.8.8.8, 8.8.4.4 pagkatapos pasok ka as admin din yong sa dhcp check mo yong box din apply

than you sir,,, try ko

deNzkie20 said:

mga sir newbie lang... paturo lang po sa bm22i. 2010 ko yun ip add nya kase 169.

Click to expand...

Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na

Ma3 said:

Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na

Click to expand...

than you sir...
ay! than you sir...

Ma3 said:

Sir na FWD ang modem nyo need mag reflash ng Firmware dôwnlôad nyo po ito

Multicast Transmit Package tool
You do not have permission to view the full content of this post. Log in or register now.
BM622i Firmware.Bin<<Credits to abedrei
You do not have permission to view the full content of this post. Log in or register now.

1st
iready ang modem isak sak sa lan port modem
dapat naka hugot power ng modem
2nd step maglagay ng static ip
ito step sa paglagy 1st
for windows 7 or 8

punta kayu control panel
click network and internet
click network and sharing center
click change adapter settings
then click and right click sa lan ethernet
click properties select ip v4
then set niyo ganito sa ip
ip address 192.168.254.100
click niyo submet mask magkakaroon na yun ng laman
then gateway ay 192.168.254.1
then sa dns set mo ay 192.168.254.1

3rd step iopen si multicast tool select 622i for device then
browse yung firmware ng 22i 2011

4th step isaksak si modem sa power
intayin na maging unidentified network si connection then select mo
click refresh network card sa multicast tool
select
yung ip na setup mo kanina o yung lan card mo

click start sa multicasty tool magbiblink yung lan at signal na meaning nagwriwrite yung firmware
yung sa signal simula baba pataas or pababa mula sa taas pag steady na ilaw pde mo na stop

5th hugutin sa saksak si modem at isak sak muli
try to access gateway

pag pumasok log in edi ok na

Click to expand...

boss ganito lang lumabas? file not found
You do not have permission to view the full content of this post. Log in or register now.

deNzkie20 said:

boss ganito lang lumabas? file not found
You do not have permission to view the full content of this post. Log in or register now.

Click to expand...

kita mo yang download po? palitan mo ng o kasi zero yang nasa download kaya nag kaka error

sir tabo yung sakin,

Ma3 said:

kita mo yang dôwnlôad po? palitan mo ng o kasi zero yang nasa dôwnlôad kaya nag kaka error

Click to expand...

thank you sir...
yan din po ba yung flash file n gagamitin?

deNzkie20 said:

sir tabo yung sakin,

thank you sir...
yan din po ba yung flash file n gagamitin?

Click to expand...

try mo lang po goodluck